Direct ink writing-based additive manufacturing of thermoplastic elastomeric materials

References

• Sun, Q.; Rizvi, G.; Bellehumeur, C.; Gu, P. Effect of Processing Conditions on the Bonding Quality of FDM Polymer Filaments. Rapid Prototyp. J. 2008, 14(2), 72–80. DOI: 10.1108/13552540810862028.
   Web of Science ®Google Scholar
• Verma, N.; Awasthi, P.; Pandey, P. M.; Banerjee, S. S. Development of Material Extrusion 3D Printing Compatible Tailorable Thermoplastic Elastomeric Materials from Acrylonitrile Butadiene Styrene and Styrene‐(Ethylene‐Butylene)‐Styrene Block Copolymer Blends. J. Appl. Polym. Sci. 2022, 139(42), e53039. DOI: 10.1002/app.53039.
   Web of Science ®Google Scholar
• Das, A.; Gilmer, E. L.; Biria, S.; Bortner, M. J. Importance of Polymer Rheology on Material Extrusion Additive Manufacturing: Correlating Process Physics to Print Properties. ACS Appl. Polym. Mater. 2021;3(3):1218–1249. DOI: 10.1021/acsapm.0c01228
   Web of Science ®Google Scholar
• Verma, N.; Awasthi, P.; Gupta, A.; Banerjee, S. S. Fused Deposition Modeling of Polyolefins: Challenges and Opportunities. Macro Mater. Eng. 2023:2200421. 308 1. DOI: 10.1002/mame.202200421
   Web of Science ®Google Scholar
• Awasthi, P.; Banerjee, S. S. Fused Deposition Modeling of Thermoplastic Elastomeric Materials: Challenges and Opportunities. Additive Manuf. 2021, 46, 102177. DOI: 10.1016/j.addma.2021.102177.
   Web of Science ®Google Scholar
• Miao, Z.; Seo, J.; Hickner, M. A. Solvent-Cast 3D Printing of Polysulfone and Polyaniline Composites. Polymer. 2018, 152, 18–24. DOI: 10.1016/j.polymer.2018.05.055.
   Web of Science ®Google Scholar
• Lee, G.; Carrillo, M.; McKittrick, J.; Martin, D. G.; Olevsky, E. A. Fabrication of Ceramic Bone Scaffolds by Solvent Jetting 3D Printing and Sintering: Towards Load-Bearing Applications. Additive Manuf. 2020, 33, 101107. DOI: 10.1016/j.addma.2020.101107.
   Web of Science ®Google Scholar
• Jabari, E.; Liravi, F.; Davoodi, E.; Lin, L.; Toyserkani, E. High Speed 3D Material-Jetting Additive Manufacturing of Viscous Graphene-Based Ink with High Electrical Conductivity. Additive Manuf. 2020, 35, 101330. DOI: 10.1016/j.addma.2020.101330.
   Web of Science ®Google Scholar
• Scott, P. J.; Rau, D. A.; Wen, J.; Nguyen, M.; Kasprzak, C. R.; Williams, C. B.; Long, T. E. Polymer-Inorganic Hybrid Colloids for Ultraviolet-Assisted Direct Ink Write of Polymer Nanocomposites. Additive Manuf. 2020;35:101393. DOI: 10.1016/j.addma.2020.101393
   Web of Science ®Google Scholar
• Yang, G.; Sun, Y.; Li, M.; Ou, K.; Fang, J.; Fu, Q. Direct-Ink-Writing (DIW) 3D Printing Functional Composite Materials Based on Supra-Molecular Interaction. Compos. Sci. Technol. 2021;215:109013. DOI: 10.1016/j.compscitech.2021.109013
   Web of Science ®Google Scholar
• Saadi, M.; Maguire, A.; Pottackal, N. T.; Thakur, M. S. H.; Ikram, M. M.; Hart, A. J.; Ajayan, P. M.; Rahman, M. M. Direct Ink Writing: A 3D Printing Technology for Diverse Materials. Adv. Mate. 2022;34(28):2108855. DOI: 10.1002/adma.202108855
   Web of Science ®Google Scholar
• Coran, A.; Patel, R. R.-T.-C.-P., II. Rubber-Thermoplastic Compositions. Part II. NBR-Nylon Thermoplastic Elastomeric Compositions. Rubber Chem. Technol. 1980, 53(4), 781–94. DOI: 10.5254/1.3535059.
   Web of Science ®Google Scholar
• Banerjee, S. S.; Bhowmick, A. K. Novel Nanostructured Polyamide 6/Fluoroelastomer Thermoplastic Elastomeric Blends: Influence of Interaction and Morphology on Physical Properties. Polymer. 2013, 54(24), 6561–71. DOI: 10.1016/j.polymer.2013.10.001.
   Web of Science ®Google Scholar
• De Rosa, C.; Auriemma, F. Structure and Physical Properties of Syndiotactic Polypropylene: A Highly Crystalline Thermoplastic Elastomer. Prog. Polym. Sci. 2006, 31(2), 145–237. DOI: 10.1016/j.progpolymsci.2005.11.002.
   Web of Science ®Google Scholar
• Nurhamiyah, Y.; Amir, A.; Finnegan, M.; Themistou, E.; Edirisinghe, M.; Chen, B. Wholly Biobased, Highly Stretchable, Hydrophobic, and Self-Healing Thermoplastic Elastomer. ACS Appl. Mater. Interfaces. 2021, 13(5), 6720–30. DOI: 10.1021/acsami.0c23155.
   PubMed Web of Science ®Google Scholar
• Banerjee, S. S.; Bhowmick, A. K. An Effective Strategy to Develop Nanostructured Morphology and Enhanced Physico-Mechanical Properties of PP/EPDM Thermoplastic Elastomers. J. Mater. Sci. 2016, 51(14), 6722–34. DOI: 10.1007/s10853-016-9959-7.
   Web of Science ®Google Scholar
• Drobny, J. G. Handbook of Thermoplastic Elastomers; Amsterdam, Netherlands: Elsevier; 2014.
   Google Scholar
• Awasthi, P.; Banerjee, S. S. Design of Ultrastretchable and Superelastic Tailorable Hydrophilic Thermoplastic Elastomeric Materials. Polymer. 2022:124914. 252. DOI: 10.1016/j.polymer.2022.124914
   Web of Science ®Google Scholar
• Holden, G. Thermoplastic Elastomers. Appl. Plast. Eng. Handb: Elsevier; 2024. 97–113.
   Google Scholar
• Banerjee, S. S.; Kumar, K. D.; Sikder, A. K.; Bhowmick, A. K. Nanomechanics and Origin of Rubber Elasticity of Novel Nanostructured Thermoplastic Elastomeric Blends Using Atomic Force Microscopy. Macromol. Chem. Phys. 2015;216(15):1666–1674. DOI: 10.1002/macp.201500173
   Web of Science ®Google Scholar
• Holden, G.; Bishop, E.; Legge, N. R. editors. Thermoplastic Elastomers. In Journal of Polymer Science Part C: Polymer Symposia; Wiley Online Library: 1969; pp 37–57.
   Google Scholar
• Kresge, E. Polyolefin Thermoplastic Elastomer Blends. Rubber Chem. Technol. 1991, 64(3), 469–80. DOI: 10.5254/1.3538564.
   Web of Science ®Google Scholar
• Fazli, A.; Rodrigue, D. Waste Rubber Recycling: A Review on the Evolution and Properties of Thermoplastic Elastomers. Materials. 2020, 13(3), 782. DOI: 10.3390/ma13030782.
   PubMed Web of Science ®Google Scholar
• Banerjee, S. S.; Bhowmick, A. K. Dynamic Vulcanization of Novel Nanostructured Polyamide 6/Fluoroelastomer Thermoplastic Elastomeric Blends with Special Reference to Morphology, Physical Properties and Degree of Vulcanization. Polymer. 2015, 57, 105–16. DOI: 10.1016/j.polymer.2014.12.016.
   Web of Science ®Google Scholar
• Spontak, R. J.; Patel, N. P. Thermoplastic Elastomers: Fundamentals and Applications. Curr. Opin. Colloid Interface Sci. 2000, 5(5–6), 333–40. DOI: 10.1016/S1359-0294(00)00070-4.
   Web of Science ®Google Scholar
• Legge, N. R. Thermoplastic Elastomers. Rubber Chem. Technol. 1987, 60(3), 83–117. DOI: 10.5254/1.3536141.
   Web of Science ®Google Scholar
• Aiswarya, S.; Awasthi, P.; Banerjee, S. S. Self-Healing Thermoplastic Elastomeric Materials: Challenges, Opportunities and New Approaches. Eur. Polym. J. 2022, 181, 111658. DOI: 10.1016/j.eurpolymj.2022.111658.
   Web of Science ®Google Scholar
• Banerjee, S. S.; Janke, A.; Gohs, U.; Heinrich, G. Electron-Induced Reactive Processing of Polyamide 6/Polypropylene Blends: Morphology and Properties. Eur. Polym. J. 2018, 98, 295–301. DOI: 10.1016/j.eurpolymj.2017.11.030.
   Web of Science ®Google Scholar
• Banerjee, S. S.; Bhowmick, A. K. Tailored Nanostructured Thermoplastic Elastomers from Polypropylene and Fluoroelastomer: Morphology and Functional Properties. Ind. Eng. Chem. Res. 2015, 54(33), 8137–46. DOI: 10.1021/acs.iecr.5b01176.
   Web of Science ®Google Scholar
• Kumar, A.; Pandey, P. M.; Jha, S.; Banerjee, S. S. Experimental Investigations into Additive Manufacturing of Styrene-Ethylene-Butylene-Styrene Block Copolymers Using Solvent Cast 3D Printing Technique. Rapid Prototyp. J. 2023, 29(7), 1367–1385. DOI: 10.1108/RPJ-08-2022-0249.
   Web of Science ®Google Scholar
• Xiao, X.; Jiang, X.; Yang, S.; Lu, Z.; Niu, C.; Xu, Y.; Huang, Z.; Kang, Y. J.; Feng, L. Solvent Evaporation Induced Fabrication of Porous Polycaprolactone Scaffold via Low-Temperature 3D Printing for Regeneration Medicine Researches. Polymer. 2021;217:123436. DOI: 10.1016/j.polymer.2021.123436
   Web of Science ®Google Scholar
• Sweeney, M.; Campbell, L. L.; Hanson, J.; Pantoya, M. L.; Christopher, G. F. Characterizing the Feasibility of Processing Wet Granular Materials to Improve Rheology for 3D Printing. J. Mater. Sci. 2017, 52(22), 13040–53. DOI: 10.1007/s10853-017-1404-z.
   Web of Science ®Google Scholar
• Singh, G.; Pandey, P. M. Uniform and Graded Copper Open Cell Ordered Foams Fabricated by Rapid Manufacturing: Surface Morphology, Mechanical Properties and Energy Absorption Capacity. Mater. Sci. Eng. A. 2019, 761, 138035. DOI: 10.1016/j.msea.2019.138035.
   Web of Science ®Google Scholar
• Singh, J.; Singh, G.; Pandey, P. M. Electric Discharge Machining Using Rapid Manufactured Complex Shape Copper Electrode with Cryogenic Cooling Channel. Proc. Inst. Mech. Eng. B J. Eng. Manuf. 2021;235(1–2):173–185. 10.1177/0954405420949102
   Web of Science ®Google Scholar
• Gao, J. Using Hansen Solubility Parameters (HSPs) to Develop Antioxidant-Packaging Film to Achieve Controlled Release; Michigan, United States of America: Michigan State University; 2014.
   Google Scholar
• Koekoekx, R.; Zawacka, N. C.; Van den Mooter, G.; Hens, Z.; Clasen, C. Electrospraying the Triblock Copolymer SEBS: The Effect of Solvent System and the Embedding of Quantum Dots. Macro Mater. Eng. 2020;305(2):1900658. 10.1002/mame.201900658
   Web of Science ®Google Scholar
• Gallu, R.; Méchin, F.; Dalmas, F.; Gérard, J.-F.; Perrin, R.; Loup, F. Investigating Compatibility Between TPU and Bitumen SARA Fractions by Means of Hansen Solubility Parameters and Interfacial Tension Measurements. Constr. Build. Mater. 2021, 289, 123151. DOI: 10.1016/j.conbuildmat.2021.123151.
   Web of Science ®Google Scholar
• Wang, L.; Topham, P. D.; Mykhaylyk, O. O.; Yu, H.; Ryan, A. J.; Fairclough, J. P. A.; Bras, W. Self‐Assembly‐Driven Electrospinning: The Transition from Fibers to Intact Beaded Morphologies. Macromolecular Rapid Communications. 2015;36(15):1437–1443. DOI: 10.1002/marc.201500149
   PubMed Web of Science ®Google Scholar
• Hansen, C. M. Hansen Solubility Parameters: A user’s Handbook; Florida, United States of America: CRC press; 2007.
   Google Scholar
• Crank, J. The Mathematics of Diffusion; Oxford, United Kingdom: Oxford university press; 1979.
   Google Scholar
• Carberry, B. J.; Farrell, J.; Kennedy, J. E. Evaluation and Characterisation of Urinary Catheter Coating Utilising Hansen Solubility Parameters and FEA Analysis. Surf. Coat. Technol. 2015, 276, 456–63. DOI: 10.1016/j.surfcoat.2015.06.029.
   Web of Science ®Google Scholar
• Crowley, M. M.; Fredersdorf, A.; Schroeder, B.; Kucera, S.; Prodduturi, S.; Repka, M. A.; McGinity, J. W. The Influence of Guaifenesin and Ketoprofen on the Properties of Hot-Melt Extruded Polyethylene Oxide Films. Eur. J. Pharm. Sci. 2004;22(5):409–418. DOI: 10.1016/j.ejps.2004.04.005
   PubMed Web of Science ®Google Scholar
• Barton, A. F. Handbook of Polymer-Liquid Interaction Parameters and Solubility Parameters; Florida, United States of America: CRC press; 1990.
   Google Scholar