Advances in polymer composites, manufacturing, recycling, and sustainable practices

References

• Formela, K.; Kurańska, M.; Barczewski, M. Recent Advances in Development of Waste-Based Polymer Materials: A Review. Polymers. 2022, 14(5), 1050. DOI: 10.3390/polym14051050.
   PubMed Web of Science ®Google Scholar
• Mohanty, A. K.; Vivekanandhan, S.; Pin, J.-M.; Misra, M. Composites from Renewable and Sustainable Resources: Challenges and Innovations. Science. 2018, 362(6414), 536–542. DOI: 10.1126/science.aat9072.
   PubMed Web of Science ®Google Scholar
• Zhu, Y.; Romain, C.; Williams, C. K. Sustainable Polymers from Renewable Resources. Nature. 2016, 540(7633), 354–362. DOI: 10.1038/nature21001.
   PubMed Web of Science ®Google Scholar
• Bhadra, J.; Al-Thani, N.; Abdulkareem, A. Recycling of Polymer-Polymer Composites. In Micro and Nano Fibrillar Composites (MFCs and NFCs) from Polymer Blends. Woodhead Publishing Series in Composites Science and Engineering; Woodhead Publishing. 2017, 263–277. DOI: 10.1016/B978-0-08-101991-7.00011-X.
   Google Scholar
• Khui, P. L. N., Rahman, M. R., Jayamani, E., & Bakri, M. K. B. Recycling of sustainable polymers and composites. In Advances in Sustainable Polymer Composites. Woodhead Publishing Series in Composites Science and Engineering. Woodhead Publishing. 2021, 267–282. DOI: 10.1016/B978-0-12-820338-5.00012-6.
   Google Scholar
• Mohanty, A. K.; Misra, M.; Drzal, L. Sustainable Bio-Composites from Renewable Resources: Opportunities and Challenges in the Green Materials World. J. Polym. Environ. 2002, 10(1/2), 19–26. DOI: 10.1023/A:1021013921916.
   Web of Science ®Google Scholar
• Saharudin, M. S.; Atif, R.; Shyha, I.; Inam, F. The Degradation of Mechanical Properties in Polymer Nano-Composites Exposed to Liquid Media–A Review. Rsc. Adv. 2016, 6(2), 1076–1089. DOI: 10.1039/C5RA22620A.
   Web of Science ®Google Scholar
• Idumah, C. I. Novel Trends in Magnetic Polymeric Nanoarchitectures. Polym. Plast. Technol. Eng. 2021, 60(8), 830–848. DOI: 10.1080/25740881.2020.1869780.
   Web of Science ®Google Scholar
• Lee, D. W.; Yoo, B. R. Advanced Silica/Polymer Composites: Materials and Applications. J. Ind. Eng. Chem. 2016, 38, 1–12. DOI: 10.1016/j.jiec.2016.04.016.
   Web of Science ®Google Scholar
• Deeba, F.; Shrivastava, K.; Bafna, M.; Jain, A. Tuning of Dielectric Properties of Polymers by Composite Formation: The Effect of Inorganic Fillers Addition. J. Compos. Sci. 2022, 6(12), 355. DOI: 10.3390/jcs6120355.
   Google Scholar
• Huang, L.-H.; Wu, C.-H.; Hua, C.-C.; Huang, T.-J. Multiscale Simulations of Coupled Composition-Stress-Morphology of Binary Polymer Blend. Polymer. 2020, 193, 122366. DOI: 10.1016/j.polymer.2020.122366.
   Web of Science ®Google Scholar
• Zhang, W.; Ji, X.; Al-Hashimi, M.; Wang, C.; Fang, L. Feasible Fabrication and Textile Application of Polymer Composites Featuring Dual Optical Thermoresponses. Chem. Eng. J. 2021, 419, 129553. DOI: 10.1016/j.cej.2021.129553.
   Web of Science ®Google Scholar
• Kumari, S.; Kumar, R.; Rai, B.; Sirohi, S.; Kumar, G. Study on the Modification of Polyester Resin Bamboo Fiber-Based Composite with Euphorbia Coagulum and Their Effect on Mechanical and Thermal Properties. J. Compos. Mater. 2020, 54(24), 3473–3480. DOI: 10.1177/0021998320916542.
   Web of Science ®Google Scholar
• Wang, F.; Li, Y.; Gough, C. R.; Liu, Q.; Hu, X. Dual-Crystallizable Silk Fibroin/Poly (L-Lactic Acid) Bio Composite Films: Effect of Polymer Phases on Protein Structures in Protein-Polymer Blends. Int. J. Mol. Sci. 2021, 22(4), 1871. DOI: 10.3390/ijms22041871.
   PubMed Web of Science ®Google Scholar
• Xiu, H.; Qi, X.; Liu, Z.; Zhou, Y.; Bai, H.; Zhang, Q.; Fu, Q. Simultaneously Reinforcing and Toughening of Polylactide/Carbon Fiber Composites via Adding Small Amount of Soft Poly (Ether) Urethane. Compos. Sci. Technol. 2016, 127, 54–61. DOI: 10.1016/j.compscitech.2016.02.025.
   Web of Science ®Google Scholar
• Chan, C. M.; Vandi, L.-J.; Pratt, S.; Halley, P.; Richardson, D.; Werker, A.; Laycock, B. Mechanical Stability of Polyhydroxyalkanoate (PHA)-Based Wood Plastic Composites (WPCs). J. Polym. Environ. 2020, 28(5), 1571–1577. DOI: 10.1007/s10924-020-01697-9.
   Web of Science ®Google Scholar
• Zhang, L.; Zhou, J.; Sakamoto, H.; Yamada, K. Effect of Surface Treatment of Cotton Fibers on the Durability of Polylactic Acid/cotton-Fiber Bio Composite S. Adv. Compos. Mater. 2022, 31(6), 683–699. DOI: 10.1080/09243046.2022.2055515.
   Web of Science ®Google Scholar
• Ilyas, R.; Zuhri, M.; Aisyah, H.; Asyraf, M.; Hassan, S.; Zainudin, E.; Sapuan, S.; Sharma, S.; Bangar, S.; Jumaidin, R., et al. Natural Fiber-Reinforced Polylactic Acid, Polylactic Acid Blends and Their Composites for Advanced Applications. Polymers. 2022, 14(1), 202.
   PubMed Web of Science ®Google Scholar
• Jin, K.; Tang, Y.; Zhu, X.; Zhou, Y. Polylactic Acid Based Bio Composite Films Reinforced with Silanized Nanocrystalline Cellulose. Int. J. Biol. Macromol. 2020, 162, 1109–1117. DOI: 10.1016/j.ijbiomac.2020.06.201.
   PubMed Web of Science ®Google Scholar
• Li, Y.; Qiu, S.; Sun, J.; Ren, Y.; Wang, S.; Wang, X.; Wang, W.; Li, H.; Fei, B.; Gu, X., et al. A New Strategy to Prepare Fully Bio-Based Poly (Lactic Acid) Composite with High Flame Retardancy, UV Resistance, and Rapid Degradation in Soil. Chem. Eng. J. 2022, 428, 131979. DOI: 10.1016/j.cej.2021.131979.
   Web of Science ®Google Scholar
• Jia, L. J.; Phule, A. D.; Yu, Z.; Zhang, X.; Zhang, Z. X. Ultra-Light Poly (Lactic Acid)/SiO2 Aerogel Composite Foam: A Fully Biodegradable and Full Life-Cycle Sustainable Insulation Material. Int. J. Biol. Macromol. 2021, 192, 1029–1039. DOI: 10.1016/j.ijbiomac.2021.10.053.
   PubMed Web of Science ®Google Scholar
• Rajeshkumar, G. Environment Friendly, Renewable and Sustainable Poly Lactic Acid (PLA) Based Natural Fiber Reinforced Composites–A Comprehensive Review. J. Cleaner Prod. 2021, 310, 127483. DOI: 10.1016/j.jclepro.2021.127483.
   Web of Science ®Google Scholar
• Aliotta, L.; Gigante, V.; Coltelli, M.; Cinelli, P.; Lazzeri, A. Evaluation of Mechanical and Interfacial Properties of Bio-Composites Based on Poly (Lactic Acid) with Natural Cellulose Fibers. Int. J. Mol. Sci. 2019, 20(4), 960. DOI: 10.3390/ijms20040960.
   PubMed Web of Science ®Google Scholar
• Mosanenzadeh, S. G.; Khalid, S.; Cui, Y.; Naguib, H. E. High Thermally Conductive PLA Based Composites with Tailored Hybrid Network of Hexagonal Boron Nitride and Graphene Nanoplatelets. Polymer Compos. 2016, 37(7), 2196–2205. DOI: 10.1002/pc.23398.
   Web of Science ®Google Scholar
• Sahu, G.; Rajput, M.S.; Mahapatra, S.P. Effect of Calcium Phosphate on Tensile and Rheological Properties of Polylactic Acid (PLA). In Recent Advances in Materials and Manufacturing Technologies, Proceedings of the Materials Science Forum. 2019. 969, 404–408, DOI: 10.4028/www.scientific.net/MSF.969.404.
   Google Scholar
• Delgado-Aguilar, M.; Reixach, R.; Tarrés, Q.; Espinach, F.; Mutjé, P.; Méndez, J. Bleached Kraft Eucalyptus Fibers As Reinforcement of Poly (Lactic Acid) for the Development of High-Performance Bio Composite S. Polymers. 2018, 10(7), 699. DOI: 10.3390/polym10070699.
   PubMed Web of Science ®Google Scholar
• Cayla, A.; Rault, F.; Giraud, S.; Salaün, F.; Fierro, V.; Celzard, A. PLA with Intumescent System Containing Lignin and Ammonium Polyphosphate for Flame Retardant Textile. Polymers. 2016, 8(9), 331. DOI: 10.3390/polym8090331.
   PubMed Web of Science ®Google Scholar
• Kalin, M.; Zalaznik, M.; Novak, S. Wear and Friction Behaviour of Poly-Ether-Ether-Ketone (PEEK) Filled with Graphene, WS2 and CNT Nanoparticles. Wear. 2015, 332, 855–862. DOI: 10.1016/j.wear.2014.12.036.
   Web of Science ®Google Scholar
• Fan, W.; Zhang, Y.; Guo, C.-Y.; Chen, G. Toward High Thermoelectric Performance for Polypyrrole Composites by Dynamic 3-Phase Interfacial Electropolymerization and Chemical Doping of Carbon Nanotubes. Compos. Sci. Technol. 2019, 183, 107794. DOI: 10.1016/j.compscitech.2019.107794.
   Web of Science ®Google Scholar
• Wu, Y.; Yao, R.; Zhang, X.; Zhang, B.; Wang, T. Preparation and Characterization of ACF/Carbon Composite Membranes for Efficient Oil/Water Separation. J. Environ. Chem. Eng. 2021, 9(3), 105164. DOI: 10.1016/j.jece.2021.105164.
   Web of Science ®Google Scholar
• Bajpai, A.; Saxena, P.; Kunze, K. Tribo-Mechanical Characterization of Carbon Fiber-Reinforced Cyanate Ester Resins Modified with Fillers. Polymers. 2020, 12(8), 1725. DOI: 10.3390/polym12081725.
   PubMed Web of Science ®Google Scholar
• Wei, H.; Liu, T.; Zhou, A.; Zou, D.; Liu, Y. Multiscale Insights on Enhancing Tensile Properties of Ultra-High Performance Cementitious Composite with Hybrid Steel and Polymeric Fibers. J. Mater. Res. Technol. 2021, 14, 743–753. DOI: 10.1016/j.jmrt.2021.07.001.
   Google Scholar
• Huang, G.; Song, P.; Liu, L.; Han, D.; Ge, C.; Li, R.; Guo, Q. Fabrication of Multifunctional Graphene Decorated with Bromine and Nano-Sb2O3 Towards High-Performance Polymer Nanocomposites. Carbon. 2016, 98, 689–701. DOI: 10.1016/j.carbon.2015.11.063.
   Web of Science ®Google Scholar
• Usca, Ü. A.; Uzun, M.; Kuntoğlu, M.; Sap, E.; Gupta, M. K. Investigations on Tool Wear, Surface Roughness, Cutting Temperature, and Chip Formation in Machining of Cu-B-CrC Composites. Int. J. Adv. Manuf. Technol. 2021, 116(9–10), 3011–3025. DOI: 10.1007/s00170-021-07670-7.
   Web of Science ®Google Scholar
• Sojobi, A. O.; Liew, K. M. Flexural Behaviour and Efficiency of CFRP-Laminate Reinforced Recycled Concrete Beams: Optimization Using Linear Weighted Sum Method. Compos. Struct. 2021, 260, 113259. DOI: 10.1016/j.compstruct.2020.113259.
   Web of Science ®Google Scholar
• Khanna, V.; Kumar, V.; Bansal, S. A. Mechanical Properties of Aluminium-Graphene/carbon Nanotubes (CNTs) Metal Matrix Composites: Advancement, Opportunities and Perspective. Mater. Res. Bull. 2021, 138, 111224. DOI: 10.1016/j.materresbull.2021.111224.
   Web of Science ®Google Scholar
• Li, Z.; Fan, G.; Guo, Q.; Li, Z.; Su, Y.; Zhang, D. Synergistic Strengthening Effect of Graphene-Carbon Nanotube Hybrid Structure in Aluminum Matrix Composites. Carbon. 2015, 95, 419–427. DOI: 10.1016/j.carbon.2015.08.014.
   Web of Science ®Google Scholar
• Luna, P.; Lizarazo-Marriaga, J.; Mariño, A. Guadua angustifolia Bamboo Fibers As Reinforcement of Polymeric Matrices: An Exploratory Study. Constr. Build. Mater. 2016, 116, 93–97. DOI: 10.1016/j.conbuildmat.2016.04.139.
   Web of Science ®Google Scholar
• Vaidya, U.; Chawla, K. Processing of Fiber Reinforced Thermoplastic Composites. Int. Mater. Rev. 2008, 53(4), 185–218. DOI: 10.1179/174328008X325223.
   Web of Science ®Google Scholar
• Rajak, D. K.; Pagar, D.; Menezes, P.; Linul, E. Fiber-Reinforced Polymer Composites: Manufacturing, Properties, and Applications. Polymers. 2019, 11(10), 1667. DOI: 10.3390/polym11101667.
   PubMed Web of Science ®Google Scholar
• Alam, M. I.; Maraz, K. M.; Khan, R. A. A Review on the Application of High-Performance Fiber-Reinforced Polymer Composite Materials. GSC Adv. Res. Rev. 2022, 10(2), 020–036. DOI: 10.30574/gscarr.2022.10.2.0036.
   Google Scholar
• Chowdary, M. V. S. S. P.; Asadi, S.; Poluraju, P. Impact of Materials on Characteristics of Engineered Cementitious Composite at Elevated Temperatures: An Integrated Approach. Mater. Today Proc. 2020, 27, 1389–1393. DOI: 10.1016/j.matpr.2020.02.768.
   Google Scholar
• Navarro, C. A.; Giffin, C. R.; Zhang, B.; Yu, Z.; Nutt, S. R.; Williams, T. J. A Structural Chemistry Look at Composites Recycling. Mater. Horiz. 2020, 7(10), 2479–2486. DOI: 10.1039/D0MH01085E.
   Web of Science ®Google Scholar
• Rajak, D. K.; Pagar, D. D.; Kumar, R.; Pruncu, C. I. Recent Progress of Reinforcement Materials: A Comprehensive Overview of Composite Materials. J. Mater. Res. Technol. 2019, 8(6), 6354–6374. DOI: 10.1016/j.jmrt.2019.09.068.
   Google Scholar
• Chabaud, G.; Castro, M.; Denoual, C.; Le Duigou, A. Hygromechanical Properties of 3D Printed Continuous Carbon and Glass Fiber Reinforced Polyamide Composite for Outdoor Structural Applications. Additive Manuf. 2019, 26, 94–105. DOI: 10.1016/j.addma.2019.01.005.
   Web of Science ®Google Scholar
• Pappu, A.; Thakur, V. K. Towards Sustainable Micro and Nano Composites from Fly Ash and Natural Fibers for Multifunctional Applications. Vacuum. 2017, 146, 375–385. DOI: 10.1016/j.vacuum.2017.05.026.
   Web of Science ®Google Scholar
• Zhang, Y.; Liu, X.; He, T.; Wan, X.; Shan, Y. 13-Degree Impact Test of Long-Fiber-Reinforced Thermoplastic Composite Wheel Manufactured by Injection Molding–Improved Co-Simulation Approach and Experimental Investigation. Int. J. Impact Eng. 2023, 174, 104517. DOI: 10.1016/j.ijimpeng.2023.104517.
   Web of Science ®Google Scholar
• Liu, Y.; Zwingmann, B.; Schlaich, M. Carbon Fiber Reinforced Polymer for Cable Structures—A Review. Polymers. 2015, 7(10), 2078–2099. DOI: 10.3390/polym7101501.
   Web of Science ®Google Scholar
• Dickson, A. N.; Barry, J. N.; McDonnell, K. A.; Dowling, D. P. Fabrication of Continuous Carbon, Glass and Kevlar Fiber Reinforced Polymer Composites Using Additive Manufacturing. Additive Manuf. 2017, 16, 146–152. DOI: 10.1016/j.addma.2017.06.004.
   Web of Science ®Google Scholar
• Yorseng, K.; Rangappa, S. M.; Pulikkalparambil, H.; Siengchin, S.; Parameswaranpillai, J. Accelerated Weathering Studies of Kenaf/Sisal Fiber Fabric Reinforced Fully Biobased Hybrid Bioepoxy Composites for Semi-Structural Applications: Morphology, Thermo-Mechanical, Water Absorption Behavior and Surface Hydrophobicity. Constr. Build. Mater. 2020, 235, 117464. DOI: 10.1016/j.conbuildmat.2019.117464.
   Web of Science ®Google Scholar
• Zhao, H.; Yang, Z.; Guo, L. Nacre-Inspired Composites with Different Macroscopic Dimensions: Strategies for Improved Mechanical Performance and Applications. NPG Asia Mater. 2018, 10(4), 1–22. DOI: 10.1038/s41427-018-0009-6.
   Google Scholar
• Hsissou, R.; Seghiri, R.; Benzekri, Z.; Hilali, M.; Rafik, M.; Elharfi, A. Polymer Composite Materials: A Comprehensive Review. Compos. Struct. 2021, 262, 113640. DOI: 10.1016/j.compstruct.2021.113640.
   Web of Science ®Google Scholar
• Ferreira, B. T.; da Silva, L. J.; Panzera, T. H.; Santos, J. C.; Freire, R. T. S.; Scarpa, F. Sisal-Glass Hybrid Composites Reinforced with Silica Microparticles. Polym. Test. 2019, 74, 57–62. DOI: 10.1016/j.polymertesting.2018.12.026.
   Web of Science ®Google Scholar
• Kim, K.-W.; Han, W.; Kim, B.-J. Effects of Mixing Ratio of Hybrid Carbonaceous Fillers on Thermal Conductivity and Mechanical Properties of Polypropylene Matrix Composites. Polymers. 2022, 14(10), 1935. DOI: 10.3390/polym14101935.
   PubMed Web of Science ®Google Scholar
• Zagho, M. M.; Hussein, E. A.; Elzatahry, A. A. Recent Overviews in Functional Polymer Composites for Biomedical Applications. Polymers. 2018, 10(7), 739. DOI: 10.3390/polym10070739.
   PubMed Web of Science ®Google Scholar
• Gu, G. X.; Chen, C.-T.; Buehler, M. J. De Novo Composite Design Based on Machine Learning Algorithm. Extreme Mech. Lett. 2018, 18, 19–28. DOI: 10.1016/j.eml.2017.10.001.
   Web of Science ®Google Scholar
• Boria, S.; Scattina, A.; Belingardi, G. Impact Behavior of a Fully Thermoplastic Composite. Compos. Struct. 2017, 167, 63–75. DOI: 10.1016/j.compstruct.2017.01.083.
   Web of Science ®Google Scholar
• Arman, N. S. N.; Chen, R. S.; Ahmad, S. Review of State-Of-The-Art Studies on the Water Absorption Capacity of Agricultural Fiber-Reinforced Polymer Composites for Sustainable Construction. Constr. Build. Mater. 2021, 302, 124174. DOI: 10.1016/j.conbuildmat.2021.124174.
   Web of Science ®Google Scholar
• Clifton, S.; Thimmappa, B. H. S.; Selvam, R.; Shivamurthy, B. Polymer Nanocomposites for High-Velocity Impact Applications-A Review. Compos. Commun. 2020, 17, 72–86. DOI: 10.1016/j.coco.2019.11.013.
   Web of Science ®Google Scholar
• Medeiros, R. J. D.; Nóbrega, S. H. S. D.; Aquino, E. M. F. D. Failure Theories on Carbon/Kevlar Hybrid Fabric Based Composite Laminate: Notch and Anisotropy Effects. Mater. Res. 2019, 22(3), 22. DOI: 10.1590/1980-5373-mr-2018-0099.
   Web of Science ®Google Scholar
• Al-Oqla, F. M.; El-Shekeil, Y. Investigating and Predicting the Performance Deteriorations and Trends of Polyurethane Bio-Composites for More Realistic Sustainable Design Possibilities. J. Cleaner Prod. 2019, 222, 865–870. DOI: 10.1016/j.jclepro.2019.03.042.
   Web of Science ®Google Scholar
• Kumar, R.; Anand, A. Tribological Behavior of Natural Fiber Reinforced Epoxy Based Composites: A Review. Mater. Today Proc. 2019, 18, 3247–3251. DOI: 10.1016/j.matpr.2019.07.200.
   Google Scholar
• Guo, P.; Meng, W.; Xu, M.; Li, V. C.; Bao, Y. Predicting Mechanical Properties of High-Performance Fiber-Reinforced Cementitious Composites by Integrating Micromechanics and Machine Learning. Materials. 2021, 14(12), 3143. DOI: 10.3390/ma14123143.
   PubMed Web of Science ®Google Scholar
• Nachtane, M.; Tarfaoui, M.; Sassi, S.; El Moumen, A.; Saifaoui, D. An Investigation of Hygrothermal Aging Effects on High Strain Rate Behaviour of Adhesively Bonded Composite Joints. Compos. B Eng. 2019, 172, 111–120. DOI: 10.1016/j.compositesb.2019.05.030.
   Web of Science ®Google Scholar
• Singh, R.; Kumar, R.; Farina, I.; Colangelo, F.; Feo, L.; Fraternali, F. Multi-Material Additive Manufacturing of Sustainable Innovative Materials and Structures. Polymers. 2019, 11(1), 62. DOI: 10.3390/polym11010062.
   PubMed Web of Science ®Google Scholar
• Ligon, S. C.; Liska, R.; Stampfl, J.; Gurr, M.; Mülhaupt, R. Polymers for 3D Printing and Customized Additive Manufacturing. Chem. Rev. 2017, 117(15), 10212–10290. DOI: 10.1021/acs.chemrev.7b00074.
   PubMed Web of Science ®Google Scholar
• Tirado-Garcia, I.; Garcia-Gonzalez, D.; Garzon-Hernandez, S.; Rusinek, A.; Robles, G.; Martinez-Tarifa, J. M.; Arias, A. Conductive 3D Printed PLA Composites: On the Interplay of Mechanical, Electrical and Thermal Behaviours. Compos. Struct. 2021, 265, 113744. DOI: 10.1016/j.compstruct.2021.113744.
   Web of Science ®Google Scholar
• Yuan, S.; Shen, F.; Chua, C. K.; Zhou, K. Polymeric Composites for Powder-Based Additive Manufacturing: Materials and Applications. Prog. Polym. Sci. 2019, 91, 141–168. DOI: 10.1016/j.progpolymsci.2018.11.001.
   Web of Science ®Google Scholar
• Wu, H.; Fahy, W. P.; Kim, S.; Kim, H.; Zhao, N.; Pilato, L.; Kafi, A.; Bateman, S.; Koo, J. H. Recent Developments in Polymers/Polymer Nanocomposites for Additive Manufacturing. Prog. Mater. Sci. 2020, 111, 100638. DOI: 10.1016/j.pmatsci.2020.100638.
   Web of Science ®Google Scholar
• Yang, W.; Yang, J.; Byun, J. J.; Moissinac, F. P.; Xu, J.; Haigh, S. J.; Domingos, M.; Bissett, M. A.; Dryfe, R. A. W.; Barg, S., et al. 3D Printing of Freestanding MXene Architectures for Current–Collector–Free Supercapacitors. Adv.Mate. 2019, 31(37), 1902725.
   Web of Science ®Google Scholar
• Narupai, B.; Nelson, A. 100th Anniversary of Macromolecular Science Viewpoint: Macromolecular Materials for Additive Manufacturing. ACS Macro. Lett. 2020, 9(5), 627–638. DOI: 10.1021/acsmacrolett.0c00200.
   PubMed Web of Science ®Google Scholar
• Geoffroy, L.; Davesne, A.-L.; Bellayer, S.; Blanchard, F.; Richard, E.; Samyn, F.; Jimenez, M.; Bourbigot, S. 3D Printed Sandwich Materials Filled with Hydrogels for Extremely Low Heat Release Rate. Polym. Degrad. Stab. 2020, 179, 109269. DOI: 10.1016/j.polymdegradstab.2020.109269.
   Web of Science ®Google Scholar
• Lakhdar, Y.; Tuck, C.; Binner, J.; Terry, A.; Goodridge, R. Additive Manufacturing of Advanced Ceramic Materials. Prog. Mater. Sci. 2021, 116, 100736. DOI: 10.1016/j.pmatsci.2020.100736.
   Web of Science ®Google Scholar
• Sanjay, M.; Madhu, P.; Jawaid, M.; Senthamaraikannan, P.; Senthil, S.; Pradeep, S. Characterization and Properties of Natural Fiber Polymer Composites: A Comprehensive Review. J. Cleaner Prod. 2018, 172, 566–581. DOI: 10.1016/j.jclepro.2017.10.101.
   Web of Science ®Google Scholar
• Platnieks, O.; Barkane, A.; Ijudina, N.; Gaidukova, G.; Thakur, V. K.; Gaidukovs, S. Sustainable Tetra Pak Recycled Cellulose/Poly (Butylene Succinate) Based Woody-Like Composites for a Circular Economy. J. Cleaner Prod. 2020, 270, 122321. DOI: 10.1016/j.jclepro.2020.122321.
   Web of Science ®Google Scholar
• Islam, M. Z.; Sarker, M. E.; Rahman, M. M.; Islam, M. R.; Ahmed, A. T. M. F.; Mahmud, M. S.; Syduzzaman, M. Green Composites from Natural Fibers and Biopolymers: A Review on Processing, Properties, and Applications. J. Reinf. Plast. Compos. 2022, 41(13–14), 526–557. DOI: 10.1177/07316844211058708.
   Web of Science ®Google Scholar
• Ramesh, P.; Mohit, H.; Arul Mozhi Selvan, V. Environmental Impact of Wood Based Bio Composite Using Life Cycle Assessment Methodology. Wood Polym. Compos.: Recent Adv. And Appl. 2021, 255–268.
   Google Scholar
• Chang, B. P.; Mohanty, A. K.; Misra, M. Studies on Durability of Sustainable Biobased Composites: A Review. Rsc. Adv. 2020, 10(31), 17955–17999. DOI: 10.1039/C9RA09554C.
   PubMed Web of Science ®Google Scholar
• Ozkur, S.; Sezgin, H.; Akay, E.; Yalcin-Enis, I. Hybrid Bio-Based Composites from Blends of Epoxy and Soybean Oil Resins Reinforced with Jute Woven Fabrics. Mater. Res. Express. 2020, 7(1), 015335. DOI: 10.1088/2053-1591/ab6892.
   Web of Science ®Google Scholar
• Fitzgerald, A.; Proud, W.; Kandemir, A.; Murphy, R. J.; Jesson, D. A.; Trask, R. S.; Hamerton, I.; Longana, M. L. A Life Cycle Engineering Perspective on Bio Composite S As a Solution for a Sustainable Recovery. Sustainability. 2021, 13(3), 1160. DOI: 10.3390/su13031160.
   Web of Science ®Google Scholar
• Teuber, L.; Osburg, V.-S.; Toporowski, W.; Militz, H.; Krause, A. Wood Polymer Composites and Their Contribution to Cascading Utilisation. J. Cleaner Prod. 2016, 110, 9–15. DOI: 10.1016/j.jclepro.2015.04.009.
   Web of Science ®Google Scholar
• Vidakis, N.; Petousis, M.; Maniadi, A.; Koudoumas, E.; Vairis, A.; Kechagias, J. Sustainable Additive Manufacturing: Mechanical Response of Acrylonitrile-Butadiene-Styrene Over Multiple Recycling Processes. Sustainability. 2020, 12(9), 3568. DOI: 10.3390/su12093568.
   Web of Science ®Google Scholar
• Colorado, H. A.; Velásquez, E. I. G.; Monteiro, S. N. Sustainability of Additive Manufacturing: The Circular Economy of Materials and Environmental Perspectives. J. Mater. Res. Technol. 2020, 9(4), 8221–8234. DOI: 10.1016/j.jmrt.2020.04.062.
   Google Scholar
• Elmushyakhi, A. Elmushyakhi, A. Parametric Characterization of Nano-Hybrid Wood Polymer Composites Using ANOVA and Regression Analysis. Structures. 2021, 29, 652–662. DOI: 10.1016/j.istruc.2020.11.069.
   Google Scholar
• Bonadies, I.; Capuano, R.; Avolio, R.; Castaldo, R.; Cocca, M.; Gentile, G.; Errico, M. Sustainable Cellulose-Aluminum-Plastic Composites from Beverage Cartons Scraps and Recycled Polyethylene. Polymers. 2022, 14(4), 807. DOI: 10.3390/polym14040807.
   PubMed Web of Science ®Google Scholar
• Kucukali-Ozturk, M.; Yalcin-Enis, I.; Sezgin, H. The Evaluation of Thermal Insulation Performances of 100% Recycled Thermoplastic Composites. Solid State Phenom. 2022, 333, 197–202. DOI: 10.4028/p-yfqf87.
   Google Scholar
• Nukala, S. G.; Kong, I.; Kakarla, A. B.; Kong, W.; Kong, W. Development of Wood Polymer Composites from Recycled Wood and Plastic Waste: Thermal and Mechanical Properties. J. Compos. Sci. 2022, 6(7), 194. DOI: 10.3390/jcs6070194.
   Google Scholar
• Iglésias, M.; Santos, P.; Lima, T. M.; Leite, L. Thermal Recycling of Glass Fiber Composites: A Circular Economy Approach. Sustainability. 2023, 15(2), 1396. DOI: 10.3390/su15021396.
   Web of Science ®Google Scholar
• Le Ferrand, H.; Bouville, F.; Niebel, T. P.; Studart, A. R. Magnetically Assisted Slip Casting of Bioinspired Heterogeneous Composites. Nature Mater. 2015, 14(11), 1172–1179. DOI: 10.1038/nmat4419.
   PubMed Web of Science ®Google Scholar
• Brenken, B.; Barocio, E.; Favaloro, A.; Kunc, V.; Pipes, R. B. Fused Filament Fabrication of Fiber-Reinforced Polymers: A Review. Additive Manuf. 2018, 21, 1–16. DOI: 10.1016/j.addma.2018.01.002.
   Web of Science ®Google Scholar
• Tao, K.; Yamada, K.; Higashi, S.; Kago, K.; Kuwashiro, S.; Hirano, H.; Takeshita, H.; Tokumitsu, K. Effect of Molding History on Molecular Orientation Relaxation During Physical Aging of Polystyrene Injection Moldings. Int. Polym. Process. 2023, 38(2), 233–243. DOI: 10.1515/ipp-2022-4264.
   Web of Science ®Google Scholar
• Wick-Joliat, R.; Schroffenegger, M.; Penner, D. Multi-Material Ceramic Material Extrusion 3D Printing with Granulated Injection Molding Feedstocks. Ceram. Int. 2023, 49(4), 6361–6367. DOI: 10.1016/j.ceramint.2022.10.170.
   Web of Science ®Google Scholar
• Chang, H.; Lu, S.; Sun, Y.; Zhang, G.; Rao, L. Optical Penetration and “Fingerprinting” Analysis of Automotive Optical Liquid Silicone Components Based on Wavelet Analysis and Multiple Recognizable Performance Evaluation. Polymers. 2022, 15(1), 86. DOI: 10.3390/polym15010086.
   PubMed Web of Science ®Google Scholar
• Shi, J.; Kang, X.; Mao, L.; Jiang, Y.; Zhao, S.; Liu, Y.; Zhai, B.; Jin, H.; Guo, L. Supercritical CO2-Applied Equipment for Chemical Synthesis and Transformation: Current Status and Perspectives. Chem. Eng. J. 2023, 459, 141608. DOI: 10.1016/j.cej.2023.141608.
   Web of Science ®Google Scholar
• Firmawan, F.; Othman, F.; Yahya, K. Improving Project Performance and Waste Reduction in Construction Projects: A Case Study of a Government Institutional Building Project. Int. J. Tech. 2012, 2(1), 182–192.
   Google Scholar
• Zhou, H.; Zhang, Y.; Wen, J.; Li, D. An Acceleration Method for the BEM-Based Cooling Simulation of Injection Molding. Eng. Anal. Bound. Elem. 2009, 33(8–9), 1022–1030. DOI: 10.1016/j.enganabound.2009.04.001.
   Web of Science ®Google Scholar
• Niendorf, K.; Raeymaekers, B. Additive Manufacturing of Polymer Matrix Composite Materials with Aligned or Organized Filler Material: A Review. Adv. Eng. Mater. 2021, 23(4), 2001002. DOI: 10.1002/adem.202001002.
   Web of Science ®Google Scholar
• Tan, W. K.; Araki, Y.; Yokoi, A.; Kawamura, G.; Matsuda, A.; Muto, H. Micro-And Nano-Assembly of Composite Particles by Electrostatic Adsorption. Nanoscale Res. Lett. 2019, 14(1), 1–9. DOI: 10.1186/s11671-019-3129-1.
   PubMed Web of Science ®Google Scholar
• Szatkiewicz, T.; Perec, A.; Radomska-Zalas, A.; Banaszek, K.; Balasz, B. Preliminary Studies into Cutting of a Novel Two Component 3D-Printed Stainless Steel–Polymer Composite Material by Abrasive Water Jet. Materials. 2023, 16(3), 1170. DOI: 10.3390/ma16031170.
   PubMed Web of Science ®Google Scholar
• Qadir, A.; Le, T. K.; Malik, M.; Amedome Min-Dianey, K. A.; Saeed, I.; Yu, Y.; Choi, J. R.; Pham, P. V. Representative 2D-Material-Based Nanocomposites and Their Emerging Applications: A Review. Rsc. Adv. 2021, 11(39), 23860–23880. DOI: 10.1039/D1RA03425A.
   PubMed Web of Science ®Google Scholar
• Pragadish, N.; Kaliappan, S.; Natrayan, L.; Selvam, M.; Patil, P. P.; Arvinda Pandian, C. K. A Short Review on AWJM of Natural Fiber Reinforced Composite Materials. Appl. Mech. Mater. 2023, 912, 123–139. DOI: 10.4028/p-bya4d7.
   Google Scholar
• Sudheendra, K.; Vinodhini, J.; Govindaraju, M.; Bhowmik, S. Application of Box Behnken Experimental Design to Analyze the Influence Mechanism of Process Parameters on Mechanical Properties of High-Performance Thermoplastic Composites. J. Thermoplast. Compos. Mater. 2023, 36(11), 4482–4505. DOI: 10.1177/08927057231158532.
   Web of Science ®Google Scholar