Effects of annealing powder on microstructures and tensile properties of LPBF-processed Haynes230 superalloy

References

• Kontis P, Chauvet E, Peng Z, et al. Atomic-scale grain boundary engineering to overcome hot-cracking in additively-manufactured superalloys. Acta Mater. 2019;177:209–221. doi:10.1016/j.actamat.2019.07.041
   Web of Science ®Google Scholar
• Wahlmann B, Galgon F, Stark A, et al. Growth and coarsening kinetics of gamma prime precipitates in CMSX-4 under simulated additive manufacturing conditions. Acta Mater. 2019;180:84–96. doi:10.1016/j.actamat.2019.08.049
   Web of Science ®Google Scholar
• Martin JH, Yahata BD, Hundley JM, et al. 3D printing of high-strength aluminium alloys. Nature. 2017;549(7672):365–369. doi:10.1038/nature23894
   PubMed Web of Science ®Google Scholar
• Gallmeyer TG, Moorthy S, Kappes BB, et al. Knowledge of process-structure-property relationships to engineer better heat treatments for laser powder bed fusion additive manufactured Inconel 718. Addit Manuf. 2020;31:100977. doi:10.1016/j.addma.2019.100977
   Web of Science ®Google Scholar
• Yeung H, Lane B, Fox J. Part geometry and conduction-based laser power control for powder bed fusion additive manufacturing. Addit Manuf. 2019;30:100844. doi:10.1016/j.addma.2019.100844
   Web of Science ®Google Scholar
• Yan Q, Song B, Shi Y. Comparative study of performance comparison of AlSi10Mg alloy prepared by selective laser melting and casting. J Mater Sci Technol. 2020;41:199–208. doi:10.1016/j.jmst.2019.08.049
   Web of Science ®Google Scholar
• Witkin DB, Patel D, Albright TV, et al. Influence of surface conditions and specimen orientation on high cycle fatigue properties of Inconel 718 prepared by laser powder bed fusion. Int J Fatigue. 2020;132:105392. doi:10.1016/j.ijfatigue.2019.105392
   Web of Science ®Google Scholar
• Kruth J. Selective laser melting of iron-based powder. J Mater Process Technol. 2004;149(1-3):616–622. doi:10.1016/j.jmatprotec.2003.11.051
   Web of Science ®Google Scholar
• Furumoto T, Ogura R, Hishida K, et al. Study on deformation restraining of metal structure fabricated by selective laser melting. J Mater Process Technol. 2017;245:207–214. doi:10.1016/j.jmatprotec.2017.02.017
   Web of Science ®Google Scholar
• Zhang Z, Han Q, Liu Z, et al. Combined effects of heat treatment and TiB2 content on the high-temperature tensile performance of TiB2-modified Ni-based GH3230 alloy processed by laser powder bed fusion. Mater Sci Eng A. 2022;861:144379. doi:10.1016/j.msea.2022.144379
   Web of Science ®Google Scholar
• Tomus D, Rometsch PA, Heilmaier M, et al. Effect of minor alloying elements on crack-formation characteristics of Hastelloy-X manufactured by selective laser melting. Addit Manuf. 2017;16:65–72. doi:10.1016/j.addma.2017.05.006
   Web of Science ®Google Scholar
• Xia T, Wang R, Bi Z, et al. Microstructure and mechanical properties of carbides reinforced nickel matrix alloy prepared by selective laser melting. Materials (Basel). 2021;14(17):4792. doi:10.3390/ma14174792
   PubMed Web of Science ®Google Scholar
• Wang H, Chen L, Dovgyy B, et al. Micro-cracking, microstructure and mechanical properties of Hastelloy-X alloy printed by laser powder bed fusion: as-built, annealed and hot-isostatic pressed. Addit Manuf. 2021;39:101853. doi:10.1016/j.addma.2021.101853
   Web of Science ®Google Scholar
• Wang W, Wang S, Zhang X, et al. Process parameter optimization for selective laser melting of Inconel 718 superalloy and the effects of subsequent heat treatment on the microstructural evolution and mechanical properties. J Manuf Process. 2021;64:530–543. doi:10.1016/j.jmapro.2021.02.004
   Web of Science ®Google Scholar
• Jackson KA. Mechanism of growth, in liquid metals and solidification, W. A. Tiller (eds.). ASM, Cleveland, Ohio, 1958, p. 276.
   Google Scholar
• Ahmed R, Menon M, Hassan T. Haynes 230 high temperature thermo-mechanical fatigue constitutive model development. In: SEM Annual Conference & Exposition on Experimental and Applied Mechanics. 2014.
   Google Scholar
• Lu YL, Liaw PK, Sun Y, et al. Hold-time effect on the elevated-temperature crack growth behavior of solid-solution-strengthened superalloys. Acta Mater. 2007;55(3):767–775. doi:10.1016/j.actamat.2006.06.044
   Web of Science ®Google Scholar
• Boehlert JC, Longanbach CS. A comparison of the microstructure and creep behavior of cold rolled HAYNES® 230 alloy™ and HAYNES® 282 alloy™. Mater Sci Eng A. 2011;528(15):4888–4898. doi:10.1016/j.msea.2011.03.019
   Web of Science ®Google Scholar
• Tang YT, Panwisawas C, Ghoussoub JN, et al. Alloys-by-design: application to new superalloys for additive manufacturing. Acta Mater. 2021;202:417–436. doi:10.1016/j.actamat.2020.09.023
   Web of Science ®Google Scholar
• Haack M, Kuczyk M, Seidel A, et al. Comprehensive study on the formation of grain boundary serrations in additively manufactured Haynes 230 alloy. Mater Charact. 2020;160:110092. doi:10.1016/j.matchar.2019.110092
   Web of Science ®Google Scholar