Impact of high-productivity process parameters in powder bed fusion – laser beam on microstructure of stainless steel 316L

References

• Cao, S., Zou, Y., Lim, C. V. S., & Wu, X. (2021). Review of laser powder bed fusion (LPBF) fabricated Ti-6Al-4V: Process, post-process treatment, microstructure, and property. Light: Advanced Manufacturing, 2(2), 1. doi:10.37188/lam.2021.020
   Google Scholar
• Choo, H., White, L. P., Xiao, X., Sluss, C. C., Morin, D., & Garlea, E. (2021). Deformation and fracture behavior of a laser powder bed fusion processed stainless steel: In situ synchrotron x-ray computed microtomography study. Additive Manufacturing, 40, 101914. doi:10.1016/j.addma.2021.101914
   Web of Science ®Google Scholar
• DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., … Zhang, W. (2018). Additive manufacturing of metallic components – Process, structure and properties. Progress in Materials Science, 92, 112–22. doi:10.1016/j.pmatsci.2017.10.001
   Web of Science ®Google Scholar
• Delgado, J., Ciurana, J., & Rodríguez, C. A. (2012). Influence of process parameters on part quality and mechanical properties for DMLS and SLM with iron-based materials. The International Journal of Advanced Manufacturing Technology, 60(5–8), 601–610. doi:10.1007/s00170-011-3643-5
   Web of Science ®Google Scholar
• Du Plessis, A. (2019). Effects of process parameters on porosity in laser powder bed fusion revealed by X-ray tomography. Additive Manufacturing, 30, 100871. doi:10.1016/j.addma.2019.100871
   Web of Science ®Google Scholar
• Goos, P., Jones, B., & Syafitri, U. (2016). I-Optimal design of mixture experiments. Journal of the American Statistical Association, 111(514), 899–911. doi:10.1080/01621459.2015.1136632
   Web of Science ®Google Scholar
• Haghdadi, N., Laleh, M., Moyle, M., & Primig, S. (2021). Additive manufacturing of steels: A review of achievements and challenges. Journal of Materials Science, 56(1), 64–107. doi:10.1007/s10853-020-05109-0
   Web of Science ®Google Scholar
• Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016). Additive manufacturing of metals. Acta Materialia, 117, 371–392. doi:10.1016/j.actamat.2016.07.019
   Web of Science ®Google Scholar
• Kan, W. H., Chiu, L. N. S., Lim, C. V. S., Zhu, Y., Tian, Y., Jiang, D., & Huang, A. (2022). A critical review on the effects of process-induced porosity on the mechanical properties of alloys fabricated by laser powder bed fusion. Journal of Materials Science, 57(21), 9818–9865. doi:10.1007/s10853-022-06990-7
   Web of Science ®Google Scholar
• Kose, H., Jin, M., & Peng, T. (2020). Quality and productivity trade-off in powder-bed additive manufacturing. Progress in Additive Manufacturing, 5(2), 199–210. doi:10.1007/s40964-020-00122-w
   Google Scholar
• Krishnan, M., Atzeni, E., Canali, R., Calignano, F., Manfredi, D., Ambrosio, E. P., & Iuliano, L. (2014). On the effect of process parameters on properties of AlSi10Mg parts produced by DMLS. Rapid Prototyping Journal, 20(6), 449–458. doi:10.1108/RPJ-03-2013-0028
   Web of Science ®Google Scholar
• Leicht, A., Fischer, M., Klement, U., Nyborg, L., & Hryha, E. (2021). Increasing the productivity of laser powder bed fusion for stainless steel 316L through increased layer thickness. Journal of Materials Engineering and Performance, 30(1), 575–584. doi:10.1007/s11665-020-05334-3
   Web of Science ®Google Scholar
• Leicht, A., Rashidi, M., Klement, U., & Hryha, E. (2020). Effect of process parameters on the microstructure, tensile strength and productivity of 316L parts produced by laser powder bed fusion. Materials Characterization, 159, 110016. doi:10.1016/j.matchar.2019.110016
   Web of Science ®Google Scholar
• Oliveira, J. P., LaLonde, A. D., & Ma, J. (2020). Processing parameters in laser powder bed fusion metal additive manufacturing. Materials and Design, 193, 108762. doi:10.1016/j.matdes.2020.108762
   Web of Science ®Google Scholar
• Paradise, P., Patil, D., Van Handel, N., Temes, S., Saxena, A., & Bruce, D. (2022). Improving productivity in the laser powder bed fusion of inconel 718 by increasing layer thickness: Effects on mechanical behavior. Journal of Materials Engineering and Performance, 32(8), 6205–6220. doi:10.1007/s11665-022-06961-8
   Google Scholar
• Rometsch, P. A., Zhu, Y., Wu, X., & Huang, A. (2022). Review of high-strength aluminium alloys for additive manufacturing by laser powder bed fusion. Materials and Design., 219, 110779. doi:10.1016/j.matdes.2022.110779
   Web of Science ®Google Scholar
• Ronneberg, T., Davies, C. M., & Hooper, P. A. (2020). Revealing relationships between porosity, microstructure and mechanical properties of laser powder bed fusion 316L stainless steel through heat treatment. Materials and Design, 189, 108481. doi:10.1016/j.matdes.2020.1084
   Web of Science ®Google Scholar
• Sanchez, S., Smith, P., Xu, Z., Gaspard, G., Hyde, C. J., Wits, W. W. … Clare, A. T. (2021). Powder Bed Fusion of nickel-based superalloys: A review. International Journal of Machine Tools and Manufacture, 165, 103729. doi:10.1016/j.ijmachtools.2021.103729
   Web of Science ®Google Scholar
• Scipioni Bertoli, U., Wolfer, A. J., Matthews, M. J., Delplanque, J. P. R., & Schoenung, J. M. (2017). On the limitations of volumetric energy density as a design parameter for selective laser melting. Materials and Design, 113, 331–340. doi:10.1016/j.matdes.2016.10.037
   Web of Science ®Google Scholar
• Smucker, B., Krzywinski, M., & Altman, N. (2018). Optimal experimental design. Nature Methods, 15(8), 559–560. doi:10.1038/s41592-018-0083-2
   PubMed Web of Science ®Google Scholar
• Snell, R., Tammas-Williams, S., Chechik, L., Lyle, A., Hernández-Nava, E., Boig, C. … Todd, I. (2020). Methods for rapid pore classification in metal additive manufacturing. Journal of the Minerals Metals and Materials Society, 72(1), 101–109. doi:10.1007/s11837-019-03761-9
   Web of Science ®Google Scholar
• Sun, S., Brandt, M., & Easton, M. (2017). Powder bed fusion processes: An overview. In Laser Additive Manufacturing: Materials, Design, Technologies, and Applications. Elsevier Ltd. doi:10.1016/B978-0-08-100433-3.00002-6
   Google Scholar
• Thomas, M., Baxter, G. J., & Todd, I. (2016). Normalised model-based processing diagrams for additive layer manufacture of engineering alloys. Acta Materialia, 108, 26–35. doi:10.1016/j.actamat.2016.02.025
   Web of Science ®Google Scholar
• Tshephe, T. S., Akinwamide, S. O., Olevsky, E., & Olubambi, P. A. (2022). Additive manufacturing of titanium-based alloys- A review of methods, properties, challenges, and prospects. Heliyon, 8(3), e09041. doi:10.1016/j.heliyon.2022.e09041
   PubMed Web of Science ®Google Scholar
• Vafadar, A., Guzzomi, F., Rassau, A., & Hayward, K. (2021). Advances in metal additive manufacturing: A review of common processes, industrial applications, and current challenges. Applied Sciences (Sciences), 11(3), 1213. doi:10.3390/app11031213
   Google Scholar
• Wang, S., Liu, Y., Shi, W., Qi, B., Yang, J., Zhang, F. … Ma, Y. (2017). Research on high layer thickness fabricated of 316L by selective laser melting. Materials, 10(9), 1055. doi:10.3390/ma10091055
   PubMed Web of Science ®Google Scholar