103
Views
17
CrossRef citations to date
0
Altmetric
Original Articles

INFLUENCE OF AUSTEMPERING TEMPERATURE ON FRACTURE TOUGHNESS OF A LOW MANGANESE AUSTEMPERED DUCTILE IRON (ADI)

Pages 245-263 | Published online: 15 Aug 2006

5.0 REFERENCES

  • Dodd , J. 1978 . High Strength, High Ductility Ductile Irons . Modern Casting , 68 : 60 – 66 .
  • Gundlach , R. B. and Janowak , J. F. 1985 . Austempered Ductile Irons Combine Strength with Toughness and Ductility . Metal Prog. , 128 : 19 – 26 .
  • Harding , R. A. 1986, February 2 . Effects of Metallurgical Process Variables on Austempered Ductile Iron . Cast Iron , : 65 – 71 .
  • Schmidt , I. and Schuchert , A. 1987 . Unlubricated Sliding Wear of Austempered Ductile Iron . Z. Metal. , 78 : 871 – 875 .
  • Johansson , M. 1977 . Austenitic-Bainitic Ductile Iron . Am. Foundry Soc. Trans. , 85 : 117 – 122 .
  • Bartosiewicz , L. , Singh , I. , Alberts , F. A. , Krause , A. R. and Putatunda , S. K. 1993 . Influence of Microstructure on High Cycle Fatigue Behaviour of Austempered Ductile Cast Iron . Mater. Charact. , 30 : 221 – 234 .
  • Bartosiewicz , L. , Kovacs , B. V. , Krause , A. R. and Putatunda , S. K. 1992 . Fatigue Crack Growth, Behaviour of Austempered Ductile Cast Iron . AFS Trans. , 92 : 135 – 142 .
  • Nakamura , T. , Kishima , K. , Jnibo , K. , Matsuo , Y. and Nugai , F. 1993 . Fatigue Strength of Austempered Ductile Iron Cylinders Subjected to Repeated Internal Pressure . J. Soc. Mech. Eng. Int. J. A , 36 : 348 – 353 .
  • Boschen , R. , Bomas , H. , Mayr , P. and Vetters , H. Strength and Fatigue of Austempered Ductile Iron (ADI) . Proceedings of the 2nd International Conference on Austempered Ductile Cast Iron, ASME, Gear Research Institute . Ann Arbor, MI. Edited by: Huth , J. pp. 179 – 185 . Naperville, IL
  • Gundlach , R. B. , Janowak , F. , Eldis , G. T. and Rohring , K. 1982 . Technical Advances in Cast Iron Metallurgy . AFS Trans. , 6 : 28 – 42 .
  • Wilkinson , O. and Grupke , C. Proceedings of the 2nd International Conference on Austempered Ductile Iron . March 1986 , Ann Arbor, MI. Edited by: Huth , J. pp. 349 – 358 . Des Plaines, IL : American Foundryman Society .
  • Panasaiewicz , J. and Grupke , C. Chrysler's Experience with Austempered Ductile Cast Iron Crank Shafts . Proceedings of the World Conference on Austempered Ductile Iron . Bloomingdale, IL. Edited by: Huth , J. pp. 176 – 194 . Des Plaines, IL : American Foundryman Society .
  • Okazaski , K. , Asai , H. , Tokuyoshi , M. , Kusoroki , H. and Shakahara , H. Proceedings of the World Conference on Austempered Ductile Iron . Bloomingdale, IL. pp. 288 – 299 . Des Plaines, IL : American Foundryman Society .
  • Kovacs , B. V. 1990 . Austempered Ductile Iron—Facts or Fiction . Modern Casting , 36 : 38 – 41 .
  • Gundlach , R. B. and Janowak , J. F. 1983 . Development of a Ductile Iron for Commercial Austempering . AFS Trans. , 86 : 377 – 388 .
  • Rouns , T. N. , Rundman , K. B. and Moore , D. M. 1984 . On the Structure and Properties of Austempered Ductile Cast Iron . AFS Trans. , 92 : 815 – 840 .
  • 1992 . “ ASTM E-399-90, Standard Test Method for Plane Strain Fracture Toughness of Metallic Materials ” . In Annual Book of ASTM Standards 506 – 536 . Philadelphia : ASTM .
  • Zum Galir , K. H. and Boschen , L. 1979 . The Influence of Thermal Treatments on Mechanical Properties of Ductile Iron . Arch. Eisenhuttenwes , 50 : 269 – 274 .
  • Doong , J. L. , Ju , F. C. , Chen , H. S. and Chen , L. W. 1986 . Influence of Austempering on Fracture Toughness in Bainitic Nodular Cast Iron . J. Mater. Sci. Lett. , 5 : 555 – 558 .
  • Doong , J. L. and Chen , C. S. 1989 . Fracture Toughness of Bainitic Ductile Cast Iron . Fatigue Fracture Eng. Mater. Struct. , 12 : 155 – 165 .
  • Grench , M. , Bowen , P. and Young , J. M. Effect of Austempering Temperature on Fracture Toughness of Nodular Cast Iron . Proceedings of the World Conference on Austempered Ductile Iron . Bloomingdale, IL. pp. 338 – 374 . Des Plaines, IL : American Foundryman Society .
  • Dorazzil , E. and Holzman , M. Fracture Behavior of Austempered Ductile Iron . Proceedings of the World Conference on Austempered Ductile Iron . Bloomingdale, IL. pp. 32 – 66 . Des Plaines, IL : American Foundryman Society .
  • Aranzabal , J. , Gutierzez , I. , Rodriguezibale , J. M. and Urcola , J. J. 1992 . Influence of Heat Treatments on Micro Structure and Toughness of Austempered Ductile Iron . Mater. Sci. Technol. , 8 : 263 – 273 .
  • Schissler , J. M. and Saverna , J. 1985 . Segregation Effects on the Formation of ADI Structure . J. Heat Treating , 16 : 167 – 177 .
  • Fan , Z. K. and Smallman , R. E. 1994 . Some Observations on the Fracture of Austempered Ductile Iron . Scr. Metall. Mater. , 31 : 137 – 142 .
  • Voight , R. C. , Dhane , H. and Eldoky , L. M. Proceedings 2nd International Conference of Austempered Ductile Cast Iron . March 1986 , Ann Arbor, MI. pp. 338 – 374 . Des Plaines, IL : American Foundryman Society .
  • Putatunda , S. K. and Singh , I. 1995 . Fracture Toughness of an Unalloyed Austempered Ductile Cast Iron (ADI) . J. Testing Eval. , 23 : 325 – 332 .
  • Rao , P. P. and Putatunda , S. K. 1997 . Influence of Microstructure on Fracture Toughness of Austempered Ductile Cast Iron . Metall. Mater. Trans. , 28A : 1457 – 1470 .
  • Rao , P. P. and Putatunda , S. K. 1998 . Comparative Study of Fracture Toughness of Austempered Ductile Iron with Upper and Lower Austenitic Temperature . Mater. Sci. Technol. , 14 : 1257 – 1265 .
  • Rao , P. P. and Putatunda , S. K. 1998 . Dependence of Fracture Toughness of Austempered Ductile Cast Iron on Austempering Temperature . Metall. Mater. Trans. , 29A : 3005 – 3016 .
  • Putatunda , S. K. , Singh , I. and Bartosiewicz , L. 1993 . Influence of Chromium on Mechanical Properties of Austempered Ductile Iron . J. Mater. Eng. Perform. , 14 : 90 – 101 .
  • Putatunda , S. K. and Gadicherla , P. 1999 . Influence of Austenitizing Temperature on Fracture Toughness of a Low Manganese Austempered Ductile Cast Iron with Ferritic as Cast Structure . J. Mater. Sci. Eng. , 268A : 15 – 31 .
  • Rundman , K. B. and Klug , R. C. 1982 . X-ray and Metallographic Studies of an Austempered Ductile Iron . AFS Trans. , 90 : 499 – 508 .
  • Roberts , C. S. 1953 . Effect of Carbon on the Lattice Parameter of Austenite . Trans. AIME , 197 : 203 – 204 .
  • Cullity , B. D. 1974 . Elements of X-ray Diffraction 411 – 412 . Reading, MA : Addison-Wesley .
  • Cullity , B. D. 1974 . Elements of X-ray Diffraction 102 Reading, MA : Addison Wesley .
  • Rouns , T. N. and Rundman , K. B. 1988 . Constitution of Austempered Ductile Iron and Kinetics of Austempering . AFS Trans. , 96 : 851 – 867 .
  • Harrynen , K. L. , Moore , D. M and Rundman , K. B. 1990 . Tensile Properties and Micro Structure of a Clean Austempered Ductile Iron . AFS Trans. , 98 : 471 – 486 .
  • Ali , A. S.H. , Uzlov , K. I. , Darwish , N. and Elliot , R. 1994 . Austempering of Low Ductile Iron, Part 4, Relationship Between Mechanical Properties and Micro Structure . Mater. Sci. Eng. , 10 : 35 – 48 .
  • Frantetovic , V. , Shea , M. M. and Ryntz , E. F. 1987 . Transmission Electron Microscopy Study of Austempered Nodular Iron, Influence of Silicon Content, Austempering Time and Austempering Temperature . Mater. Sci. Eng. , 96 : 231 – 236 .
  • Sidjanin , L. and Smallman , R. F. 1992 . Metallography of Bainitic Transformation in Austempered Ductile Iron . Mater. Sci. Technol. , 8 : 1095 – 1112 .
  • Voigt , R. , Dhane , H. and Eldoky , L. Micro Structural Aspects of Fracture in Austempered Ductile Iron . Proceedings of 2nd International Conference on Austempered Ductile Cast Iron . Ann Arbor, MI. pp. 327 – 340 . Naperville, IL : ASME: Gear Research Institute .
  • Mayr , P. , Vetters , H. and Wallia , J. Investigations on the Stress Induced Martensite Formation . Proceedings of 2nd International Conference on Austempered Ductile Cast Iron . Ann Arbor, MI. pp. 171 – 178 . Naperville, IL : ASME: Gear Research Institute .
  • Vuorinen , J. Strain Hardening Mechanisms and Characteristics of Austempered Ductile Iron . Proceedings of 2nd International Conference on Austempered Ductile Cast Iron . Ann Arbor, MI. pp. 179 – 185 . Naperville, IL : ASME: Gear Research Institute .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.