OPTIMIZED CURING OF THICK SECTION COMPOSITE LAMINATES

6.0 REFERENCES

• Pillai , V. , Beris , A. N. and Dhurjati , P. 1997 . Intelligent Curing of Thick Composites Using a Knowledge-Based System . J. Composite Mater. , 31 : 22
   Google Scholar
• Loos , A. C. and Springer , G. S. 1985 . Curing of Epoxy Matrix Composites . J. Composite Mater. , 17 : 58
   Google Scholar
• Purslow , D. and Childs , R. 1986 . Autoclave Moulding of Carbon Fibre Reinforced Epoxies . Composites , 17 : 127
   Google Scholar
• Bogetti , T. A. and Gillespie , J. W. 1991 . Two Dimensional Cure Simulation of Thick Thermosetting Composites . J. Composite Mater. , 25 : 239
   Google Scholar
• Poursartip , A. , Riahi , G. and Smith , G. 1992 . Flow and Pressure Experiments for Laminate Fabrication . Proceedings of SAMPE 36th International Symposium . 1992 , Covina, CA. Edited by: Carson , R. and et al. Society for the Advancement of Material and Process Engineering .
   Google Scholar
• Martinez , G. M. 1991 . Fast Cures for Thick Laminated Organic Matrix Composites . Chem. Eng. Sci. , 46 : 439
   Google Scholar
• Kardos , J. L. , Dudukovic , M. P. and Dave , R. 1986 . “ Epoxy Resins and Composites ” . In Advances in Polymer Science Vol. 80 , 101 Berlin : Springer Verlag .
   Google Scholar
• Mallow , A. R. , Muncaster , F. R. and Campbell , F. C. Science Based Cure Model for Composites . Proceedings of the American Society for Composites-First Technical Conference . Dayton, OH. pp. 171 Lancaster, PA : Technomic Publishing Co. .
   Google Scholar
• Abrams , F. , Garett , P. , Lagnese , T. , LeClair , S. , Lee , C. W. and Park , J. Qualitative Process Automation of Autoclave Curing of Composites , Air Force Materials Laboratory Report AFWAL-TR-87-4083 . Air Force Wright Aeronautical Laboratories, Air Force Systems Command, Wright-Patterson Air Force Base Dayton, OH, 1987
   Google Scholar
• LeClair , S. R. and Abrams , F. L. 1988 . Qualitative Process Automation . Int. J. Intelligent Manuf. , 2 : 205
   Google Scholar
• Lee , C. W. Composites Cure Process Control by Expert Systems . Proceedings of the American Society for Composites-First Technical Conference . Dayton, OH. pp. 187 Lancaster, PA : Technomic Pub. Co. .
   Google Scholar
• LeClair , S. R. and Abrams , F. L. Qualitative Process Automation . Proceedings of the 27th IEEE Conference on Decision and Control . Austin, TX. New York : Institute of Electrical and Electronics Engineers, Inc. .
   Google Scholar
• Ciriscioli , P. R. and Springer , G. S. 1991 . An Expert System for Autoclave Curing of Composites . J. Composite Mater. , 25 : 1542
   Google Scholar
• Ciriscioli , P. R. , Springer , G. S. and Quiling , W. An Expert System for Controlling Autoclave Temperature. In Tomorrow's Materials: Today . Today Proceeding of 34th SAMPE Symposium . Reno, NY. Edited by: Carson , R. and et al. Covina, CA : Society for the Advancement of Material and Process Engineering .
   Google Scholar
• Kalra , L. , Perry , M. J. and Lee , L. J. 1992 . Automation of Autoclave Cure of Graphite-Epoxy Composites . J. Composite Mater. , 25 : 2567
   Google Scholar
• Kalra , L. , Wang , Q. , Springer , G. S. and Lee , W. II . An Expert System for Controlling Autoclave Temperature. In Advanced Materials: The Challenge for the Next Decade . Proceedings of 35th International SAMPE Symposium and Exhibition . Anaheim, CA. Edited by: Carson , R. and et al. pp. 1507 Covina, CA : Society for the Advancement of Material and Process Engineering .
   Google Scholar
• Wu , H. T. and Joseph , B. 1992 . A Blackboard Architecture for Model-Based Reasoning and Plan Refinement in Real-Time Process Control . Chem. Engineer. Sci. , 47 : 917
   Google Scholar
• Jang , B. Z. , Hseih , H. B. and Shelby , M. D. Vibration-Based Cure Monitoring for Composites, In ANTEC '89 . Annual Technical Conference Society of Plastics Engineers . Detroit, MI. pp. 1527 Brookfield Center, CT : The Society .
   Google Scholar
• Williams , R. J.J. , Benavente , M. A. and Rusecaite , R. A. 1990 . Criteria for Selecting Cure Cycles in Autoclave Processing of Graphite-Epoxy Composites . Polym. Eng. Sci. , 30 : 1140
   Google Scholar
• Trivisano , A. and Kenny , J. M. Control of the Autoclave Processing of High Performance Composites, In ANTEC '92 . Proceedings of the Society of Plastics Engineers . Detroit, MI. pp. 2045 Brookfield Center, CT : The Society .
   Google Scholar
• Kenny , J. M. Integration of Processing Models with Controland Optimization of Polymer Composites Fabrication, In CADCOMP'92 . 3rd International Conference on Computer Aided Design in Composite Materials Technology . Newark, Southampton; Boston, DE. Berlin, New York : Computational Mechanics Publications . and Springer-Verlag, New York
   Google Scholar
• Tam , A. S. and Gutowski , T. G. A Nonlinear Process Controller for Curing a Thermoset Composites, In Tomorrow's Materials: Today . Proceedings of the 34th International SAMPE Symposium . Reno, NV. Edited by: Carson , R. and et al. pp. 426 Covina, CA : Society for the Advancement of Material and Process Engineering .
   Google Scholar
• Nagendra , S. and Loos , A. C. Tomorrow's Materials: Today . Proceedings of the 34th International SAMPE Symposium . Reno, NV. Optimization of the Curing Process of Filament Wound Composites , Edited by: Carson , R. and et al. pp. 1853 Covina, CA : Society for the Advancement of Material and Process Engineering .
   Google Scholar
• Somanath , N. and Loos , A. C. 1988 . A Finite Element Cure Model and Cure Cycle Optimization for Composite Structures , CCMS-88-14 Blacksburg, VA : Virginia Polytechnic Institute .
   Google Scholar
• Lee , W. I. , Loos , A. C. and Springer , G. S. 1982 . Heat of Reaction Degree of Cure, and Viscosity of Hercules 3501-6 Resin . J. Composite Mater. , 16 : 510
   Google Scholar
• Yang , Z. L. and Chen , H. R. 1997 . The Finite Element Analysis of Transient Fields of the Temperature and Degree of Cure of Laminates During the Whole Curing Process . Chin. J. Fiber Reinforced Plastics/Composites , 3 : 3
   Google Scholar
• Standard Test Method for Apparent Interlaminar Shear Strength of Parallel Fiber Composites by Short-Beam Method . Designation: D 2344-84 . May 25 . Philadelphia : American Society for Testing and Materials .
   Google Scholar