A Simulation Tool for the Optimization of Lumber Drying Schedules

References

• Tremblay , C. and Fortin , Y. Modeling the Conventional Kiln Drying Process and Comparison with Experimental Results . Proc. Forest Products Society Conference “Quality drying: the key to profitable manufacturing” . Montréal, Canada. pp. 105 – 110 .
   Google Scholar
• Cloutier , A. , Fortin , Y. and Dhatt , G. 1992 . A wood drying finite element model based on the water potential concept . Drying Technology , 10 ( 5 ) : 1151 – 1181 .
   Google Scholar
• Tremblay , C. , Cloutier , A. and Fortin , Y. 2000 . Experimental determination of the convective heat and mass transfer coefficients for wood drying . Wood Sci. and Technol. , 34 ( 3 ) : 253 – 276 . [CROSSREF] [CSA]
   Google Scholar
• Tremblay , C. , Cloutier , A. and Grandjean , B. 1999 . Experimental determination of the ratio of vapor diffusion to the total water movement in wood during drying . Wood Fiber Sci. , 31 ( 3 ) : 235 – 248 .
   Google Scholar
• Fortin , Y. , Tremblay , C. , Fafard , M. and Duplain , G. Wood Drying Modelling Based on the Water Potential Concept: Simulation Results for Conventional Kiln Drying of Black Spruce Lumber . Proc. 7th International IUFRO Wood Drying Conference . Tsukuba, Japan. pp. 28 – 33 .
   Google Scholar
• Nabhani , M. , Tremblay , C. and Fortin , Y. Experimental Determination of Convective Heat and Mass Transfer Coefficients During Wood Drying . Proc. 8th International IUFRO Wood Drying Conference . Brasov, Romania. pp. 225 – 230 .
   Google Scholar
• Cloutier , A. 1993 . Modélisation du Séchage du Bois Québec : Forintek Canada Corp. . Rapport d’étape. Projet no. 3312K200
   Google Scholar
• Milota , M.R. Mass Transfer Coefficients as a Function of Position in a Lumber Kiln . Proc. 4th International IUFRO Wood Drying Conference . Rotorua, New Zealand. pp. 114 – 121 .
   Google Scholar
• Salin , J.-G. Prediction of Heat and Mass Transfer Coefficients for Individual Boards and Board Surfaces, A Review . Proc. 5th International IUFRO Wood Drying Conference . Québec, Canada. pp. 49 – 58 .
   Google Scholar
• Carlsson , P. and Arfvidsson , J. 2000 . Optimized wood drying . Drying Technology , 18 ( 8 ) : 1779 – 1796 .
   Google Scholar
• Carlsson , P. and Tinnsten , M. Optimized Wood Drying of a Mixture of Representative Boards . Proc. 7th IUFRO International Wood Drying Conference . Tsukuba, Japan. pp. 22 – 27 .
   Google Scholar
• Wu , Q. and Milota , M.R. 1995 . Rheological behavior of Douglas-fir perpendicular to the grain at elevated temperatures . Wood Fiber Sci. , 27 ( 3 ) : 285 – 295 .
   Google Scholar
• Swensson , S. 1996 . Strain and shrinkage force in wood under kiln drying conditions. II: Strain, shrinkage and stress measurements under controlled climate conditions . Holzforschung , 50 ( 5 ) : 463 – 469 .
   Google Scholar
• Goulet , M. 1960 . Dependence of transverse tensile strength of oak, beech, and spruce on moisture content and temperature within the range of 0° to 100°C . Holz als Roh- und Werkstoff , 18 ( 9 ) : 325 – 331 . (in German)
   Google Scholar
• Gerhards , C.C. 1982 . Effect of moisture content and temperature on the mechanical properties of wood: an analysis of immediate effects . Wood and Fiber , 14 ( 1 ) : 4 – 36 .
   Google Scholar
• Jessome , A.P. 1977 . Résistance et Propriétés Connexes des Bois Indigènes au Canada Ottawa, , Canada : Laboratoire des produits forestiers de l’Est . Rapport technique de foresterie 21
   Google Scholar
• Simpson , W.T. 1991 . “ Dry kiln operator's manual ” . In USDA Forest Service Agricultural Handbook No 188 Madison, , USA : Forest Products Laboratory .
   Google Scholar
• Shottafer , J.E. and Shuler , C.E. 1974 . “ Estimating heat consumption in kiln drying lumber ” . In Life Sciences and Agriculture Experiment Station Tech. Bulletin 73 USA : University of Maine .
   Google Scholar
• Fortin , Y. , Savard , M. and Amazouz , M. 2003 . Rapport sur L’analyse des Résultats de L’enquête Effectuée Auprès des Usines de Sciage du Québec, Phase I: Portrait Global du Parc de Séchage du Bois de Sciage au Québec. Québec : Programme de Réduction de la Consommation Énergétique des Séchoirs—Industrie du Bois .
   Google Scholar
• Hukka , A. Using Steam During the Warm-up to Improve the Drying Quality of Sawn Timber . Proc. 6th IUFRO International Wood Drying Conference . Stellenbosch, South Africa. pp. 51 – 60 .
   Google Scholar