A GENETIC ALGORITHMIC APPROACH FOR OPTIMIZATION OF SURFACE ROUGHNESS PREDICTION MODEL IN DRY MILLING

REFERENCES

• Dural , U. , Anselmo , E. , Gilberto Miranda , W.A. , and Nivaldo , L. ( 2002 ) Using a Minimum Quantity of Lubricant (MQL) and a Diamond Coated Tool in the Drilling of Aluminium-Silicon Alloys , Journal of Materials Processing Technology , 122 : 127 – 138 . [CSA]
   Google Scholar
• Sreejith , P.S. and Ngoi , B.K.A. ( 2000 ) Dry Machining: Machining of the Future , Journal of Materials Processing Technology , 101 : 287 – 291 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Luis Perez , C.J. ( 2002 ) Surface Roughness Modeling Considering Uncertainty in Measurements , International Journal of Production Research , 40 ( 10 ): 2245 – 2268 . [CROSSREF]
   Google Scholar
• Chung , S.C. ( 1998 ) A Force Model for Nose Radius Worn Tools with a Chamfered Main Cutting Edge , International Journal of Machine Tools and Manufacture , 38 : 1467 – 1498 . [CSA] [CROSSREF]
   Google Scholar
• Wang , M.-Y. and Chang , H.-Y. ( 2004 ) Experimental Study of Surface Roughness in Slot End Milling AL2014-T6 , International Journal of Machine Tools and Manufacture , 44 : 51 – 57 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Diniz , A.E. and Micaroni , R. ( 2002 ) Cutting Conditions for Finish Turning Process Aiming: The Use of Dry Cutting , International Journal of Machine Tools and Manufacture , 42 : 899 – 904 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Fuh , K.U. and Wu , C.-F. ( 1995 ) A Proposed Statistical Model for Surface Quality Prediction in End Milling of Al Alloy , International Journal of Machine Tools and Manufacture , 35 : 1187 – 1200 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Vieira , J.M. , Machado , A.R. , and Ezugwu , E.O. ( 2001 ) Performance of Cutting Fluids During Face Milling of Steels , Journal of Materials Processing Technology , 116 : 244 – 251 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Rahman , M. , Senthil Kumar , A. , and Manzoor-Ul-Salem . ( 2001 ) Evaluation of Minimal Quantities of Lubricant in End Milling , International Journal of Advanced Manufacturing Technology , 18 : 235 – 241 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Mansour , A. and Abdalla , H. ( 2002 ) Surface Roughness Model for End Milling: A Semi-Free Cutting Carbon Case Hardening Steel (EN32) in Dry Condition , Journal of Materials Processing Technology , 124 : 183 – 191 . [CSA] [CROSSREF]
   Google Scholar
• Alauddin , M. , El Baradie , M.A. , and Hasmi , M.S.J. (1996) Optimization of Surface Finish in End Milling Inconel 718, Journal of Materials Processing Technology , 56: 54–65. [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Taraman , K. and Lambert , B. ( 1974 ) A Surface Roughness Model for Turning Operation , International Journal of Production Research , 12 ( 6 ): 691 – 703 .
   Google Scholar
• Jain , R.K. and Jain , V.K. ( 2000 ) Optimum Selection of Machining Conditions in Abrasive Flow using Neural networks , Journal of Materials Processing Technology , 108 : 62 – 67 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Suresh , P.V.S. , Venkateswara Rao , P. , and Deshmukh , S.G. ( 2002 ) A Genetic Algorithmic Approach for Optimization of Surface Roughness Prediction Model , International Journal of Machine Tools and Manufacture , 42 : 675 – 680 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Montgomery , D. ( 1996 ) Introduction to Statistical Quality Control . John Wiley and Sons , New York .
   Google Scholar
• Goldberg , D.E. ( 1999 ) Genetic Algorithms . Addison-Wesley , India .
   Google Scholar
• Kishawy , H.A. and Elbestawi , M.A. ( 1999 ) Effects of Process Parameters on Material Side Flow During Hard Turning , International Journal of Machine Tools and Manufacture , 39 : 1017 – 1030 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Alauddin , M. , El Baradie , M.A. , and Hasmi , M.S.J. ( 1995 ) Computer-Aided Analysis of a Surface Roughness Model for End Milling , Journal of Materials Processing Technology , 55 : 123 – 127 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Thiele , J.D. and Melkote , S.N. ( 1999 ) Effect of Cutting Edge Geometry and Workpiece Surface Hardness on Surface Generation in Finish Hard Turning of AISI52100 Steel , Journal of Materials Processing Technology , 94 : 216 – 226 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar