MAXIMIZATION OF CHATTER-FREE MATERIAL REMOVAL RATE IN END MILLING USING ANALYTICAL METHODS

REFERENCES

• Tlusty , J. , Polacek , J. , and Polacek , M. ( 1963 ). The Stability of Machine Tools against Self Excited Vibrations in Machining . ASME International Research in Production Engineering , 465 – 474 .
   Google Scholar
• Tobias , S.A. ( 1965 ). Machine Tool Vibration . Blackie and Sons Ltd.
   Google Scholar
• Koenigsberger , F. and Tlusty , J. ( 1967 ). Machine Tool Structures-Vol. I: Stability Against Chatter . Pergamon Press .
   Google Scholar
• Tlusty , J. and Ismail , F. ( 1981 ). Basic Nonlinearity in Machining Chatter . Annals of the CIRP , 30 : 21 – 25 .
   Google Scholar
• Sridhar , R. , Hohn , R.E. , and Long , G.W. ( 1968 ). General Formulation of the Milling Process Equation . Trans. ASME Journal of Engineering for Industry , 90 : 317 – 324 .
   Google Scholar
• Sridhar , R. , Hohn , R.E. , and Long , G.W. ( 1968 ). A Stability Algorithm for the General Milling Process . Trans. ASME Journal of Engineering for Industry , 90 : 330 – 334 .
   Google Scholar
• Minis , I. , Yanushevsky , T. , Tembo , R. , and Hocken , R. ( 1990 ). Analysis of Linear and Nonlinear Chatter in Milling . Annals of the CIRP , 39 : 459 – 462 .
   Google Scholar
• Minis , I. and Yanushevsky , T. ( 1993 ). A New Theoretical Approach for the Prediction of Machine Tool Chatter in Milling. Trans . ASME Journal of Engineering for Industry , 115 : 1 – 8 . [CSA]
   Google Scholar
• Budak , E. ( 1994 ). The Mechanics and Dynamics of Milling Thin-Walled Structures . Ph.D. Dissertation , University of British Columbia .
   Google Scholar
• Altintas , Y. and Budak , E. ( 1995 ). Analytical Prediction Of Stability Lobes In Milling . Annals of the CIRP , 44 ( 1 ): 357 – 362 . [CSA]
   Google Scholar
• Budak , E. and Altintas , Y. ( 1998 ). Analytical Prediction of Chatter Stability in Milling - Part I: General Formulation, Part II: Application To Common Milling Systems . Trans. ASME Journal of Dynamic Systems, Measurement and Control , 20 : 22 – 36 .
   Google Scholar
• Altintas , Y. , Shamoto , E. , Lee , P. , and Budak , E. ( 1999 ). Analytical Prediction of Stability Lobes in Ball-End-Milling . Trans. ASME Journal of Manufacturing Science and Engineering , 121 ( 4 ): 586 – 592 . [CSA]
   Web of Science ®Google Scholar
• Altintas , Y. ( 2001 ). Analytical Prediction of Three Dimensional Chatter Stability in Milling . Japan Society of Mechanical Engineers, International Journal Series: Mechanical Systems, Machine Elements and Manufacturing , 44 ( 3 ): 717 – 723 . [CSA]
   Google Scholar
• Smith , S. , Winfough , W. , and Halley , J. ( 1998 ). The Effect of Tool Length on Stable Metal Removable Rate in High Speed Milling . Annals of the CIRP , 47 : 302 – 310 . [CSA]
   Google Scholar
• Davies , M.A. , Pratt , J.R. , Dutterer , B. , and Burns , T.J. (2002). Stability Prediction of Low Immersion Milling. Trans. ASME Journal of Manufacturing Science and Engineering , 124:217–225. [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Insperger , T. , Mann , B.P. , Stephan , G. , and Bayly , P.V. ( 2003 ). Stability of Up-Milling and Down-Milling, Part I: Alternative Analytical Methods . International Journal of Machine Tools and Manufacture , 43 : 25 – 34 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Merdol , S.D. and Altintas , Y. ( 2004 ). Multi Frequency Solution of Chatter Stability Limits for Low Immersion Milling . Trans. ASME Journal of Manufacturing Science and Engineering , 126 : 459 – 466 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Corpus , W.T. and Endres , W.J. ( 2004 ). Added Stability Lobes in Machining Processes That Exhibit Periodic Time Variation, Part 1: An Analytical Solution . Trans. ASME Journal of Manufacturing Science and Engineering , 126 : 467 – 474 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Corpus , W.T. and Endres , W.J. ( 2004 ). Added Stability Lobes in Machining Processes That Exhibit Periodic Time Variation, Part 2: Experimental Validation . Trans. ASME Journal of Manufacturing Science and Engineering , 126 : 475 – 480 . [CSA] [CROSSREF]
   Google Scholar
• Slavicek , J. ( 1965 ). The Effect of Irregular Tooth Pitch on Stability of Milling . Proceedings of the 6th MTDR Conference , 15 – 22 .
   Google Scholar
• Opitz , H. , Dregger , E.U. , and Roese , H. ( 1966 ). Improvement of the Dynamic Stability of the Milling Process by Irregular Tooth Pitch . Proceedings of the Adv. MTDR Conference , 7 : 213 .
   Google Scholar
• Vanherck , P. . ( 1966 ). Increasing Milling Machine Productivity by Use of Cutters with Non-Constant Cutting Edge Pitch . 8th MTDR Conference 947 – 960 .
   Google Scholar
• Tlusty , J. , Ismail , F. , and Zaton , W. ( 1983 ). Use Of Special Milling Cutters against Chatter , NAMRC Conference 11, SME , 408 – 415 .
   Google Scholar
• Altintas , Y. , Engin , S. , and Budak , E. ( 1999 ). Analytical Stability Prediction and Design of Variable Pitch Cutters . Trans. ASME Journal of Manufacturing Science and Engineering , 121 : 173 – 178 . [CSA]
   Web of Science ®Google Scholar
• Budak , E. ( 2000 ). Improving Part Quality in Milling of Titanium Based Impellers by Chatter Suppression and Force Control . Annals of the CIRP , 49 ( 1 ): 31 – 38 . [CSA]
   Google Scholar
• Budak , E. ( 2003 ). An Analytical Design Method For Milling Cutters with Non-Constant Pitch to Increase Stability, Part I: Theory, Part II: Application . Trans. ASME Journal of Manufacturing Science and Engineering , 125 : 29 – 38 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Smith , S. and Tlusty , J. ( 1993 ). Efficient Simulation Programs for Chatter in Milling . Annals of the CIRP , 42 ( 1 ): 463 – 466 . [CSA]
   Google Scholar
• Schmitz , T.L. ( 2000 ). Predicting High Speed Machining Dynamics by Substructure Analysis . Annals of the CIRP , 49 : 303 – 308 . [CSA]
   Google Scholar
• Schmitz , T.L. , Davies , M.A. , and Kennedy , M.D. ( 2001 ). Tool Point Frequency Response Prediction for High Speed Machining by RCSA . Trans. ASME Journal of Manufacturing Science and Engineering , 123 : 700 – 707 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Kivanc , E.B. and Budak , E. ( 2004 ). Structural Modeling of End Mills for Form Error and Stability Analysis . International Journal of Machine Tools and Manufacture , 44/11 : 1151 – 1161 . [CROSSREF]
   Google Scholar
• Weck , M. , Altintas , Y. , and Beer , C. ( 1994 ). CAD Assisted Chatter Free NC Tool Path Generation in Milling . International Journal of Machine Tools and Manufacture , 34 : 879 – 891 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• Hatna , A. , Grieve , R.J. , and Broomhead , P. ( 1998 ). Automatic CNC Milling of Pockets: Geometric and Technological Issues. Computer Integrated Manufacturing Systems , 11 ( 4 ): 309 – 330 .
   Google Scholar