Tribological investigation of diamond-like carbon coated micro-dimpled surface under bovine serum and osteoarthritis oriented synovial fluid

References

• BlagosklonnyM V 2010 Why human lifespan is rapidly increasing: solving ‘longevity riddle’ with ‘revealed-slow-aging’ hypothesis Aging 2 177 10.1016/j.ceramint.2013.08.009
   PubMedGoogle Scholar
• HarrisW H 1995 The problem is osteolysis Clin. Orthopaed. Relat. Res. 311 46 53 46–53
   PubMed Web of Science ®Google Scholar
• ChoudhuryDUrbanFVrbkaMHartlMKrupkaI 2015 A novel tribological study on DLC-coated micro-dimpled orthopedics implant interface J. Mechan. Behavior Biomed. Mat. 45 121 131 121–31 10.1016/j.jmbbm.2014.11.028
   PubMed Web of Science ®Google Scholar
• LiuFJinZRobertsPGrigorisP 2006 Importance of head diameter, clearance, and cup wall thickness in elastohydrodynamic lubrication analysis of metal-on-metal hip resurfacing prostheses Proc. Inst. Mechan. Eng. H: J. Engin. Med. 220 695 704 695–704 10.1243/09544119JEIM172
   PubMed Web of Science ®Google Scholar
• ChoudhuryDAy ChingHMamatA BCizekJOsmanAAzuanNVrbkaMHartlMKrupkaI 2014 Fabrication and characterization of DLC coated microdimples on hip prosthesis heads J. Biomed. Mater. Res. B: Appl. Biomater. at press ( 10.1002/jbm.b.33274 )
   Web of Science ®Google Scholar
• WimmerMLoosJNassuttRHeitkemperMFischerA 2001 The acting wear mechanisms on metal-on-metal hip joint bearings: in vitro results Wear 250 129 139 129–39 10.1016/S0043-1648(01)00654-8
   Web of Science ®Google Scholar
• FirkinsPTipperJSaadatzadehMInghamEStoneMFarrarRFisherJ 2001 Quantitative analysis of wear and wear debris from metal-on-metal hip prostheses tested in a physiological hip joint simulator Bio-Med. Mater. Eng. 11 143 157 143–57
   PubMed Web of Science ®Google Scholar
• AmanovASasakiS 2013 A study on the tribological characteristics of duplex-treated Ti–6Al–4V alloy under oil-lubricated sliding conditions Tribol. Int. 64 155 163 155–63 10.1016/j.triboint.2013.03.015
   Web of Science ®Google Scholar
• AmanovAChoI-SKimD-EPyunY-S 2012 Fretting wear and friction reduction of CP titanium and Ti–6Al–4V alloy by ultrasonic nanocrystalline surface modification Surf. Coat. Technol. 207 135 142 135–42 10.1016/j.surfcoat.2012.06.046
   Web of Science ®Google Scholar
• MasmoudiMAssoulMWeryMAbdelhediREl HalouaniFMonteilG 2006 Friction and wear behaviour of cp Ti and Ti6Al4V following nitric acid passivation Appl. Surf. Sci. 253 2237 2243 2237–43 10.1016/j.apsusc.2006.04.047
   Web of Science ®Google Scholar
• QiuYKhonsariM 2011 Experimental investigation of tribological performance of laser textured stainless steel rings Tribol. Int. 44 635 644 635–44 10.1016/j.triboint.2011.01.003
   Web of Science ®Google Scholar
• RoyTChoudhuryDBin MamatAPingguan-MurphyB 2014 Fabrication and characterization of micro-dimple array on Al2O3 surfaces by using a micro-tooling Ceram. Int. 40 2381 2388 2381–8 10.1016/j.ceramint.2013.08.009
   Web of Science ®Google Scholar
• SawanoHWarisawaS IIshiharaS 2009 Study on long life of artificial joints by investigating optimal sliding surface geometry for improvement in wear resistance Precision Engin. 33 492 498 492–8 10.1016/j.precisioneng.2009.01.005
   Web of Science ®Google Scholar
• RoyTChoudhuryDGhoshSMamatA BPingguan-MurphyB 2015 Improved friction and wear performance of micro dimpled ceramic-on-ceramic interface for hip joint arthroplasty Ceram. Int. 41 681 90 681–90 10.1016/j.ceramint.2014.08.123
   Web of Science ®Google Scholar
• HauertR 2003 A review of modified DLC coatings for biological applications Diam. Relat. Mater. 12 583 589 583–9 10.1016/S0925-9635(03)00081-5
   Web of Science ®Google Scholar
• MeletisEErdemirAFenskeG 1995 Tribological characteristics of DLC films and duplex plasma nitriding/DLC coating treatments Surf. Coat. Technol. 73 39 45 39–45 10.1016/0257-8972(94)02375-1
   Web of Science ®Google Scholar
• FieldSJarrattMTeerD 2004 Tribological properties of graphite-like and diamond-like carbon coatings Tribol. Int. 37 949 956 949–56 10.1016/j.triboint.2004.07.012
   Web of Science ®Google Scholar
• ManhaboscoTBarbozaABatistaRNevesBMüllerI 2013 Corrosion, wear and wear–corrosion behavior of graphite-like a-C: H films deposited on bare and nitrided titanium alloy Diam. Relat. Mater. 31 58 64 58–64 10.1016/j.diamond.2012.11.005
   Web of Science ®Google Scholar
• HeubergerM PWidmerM RZobeleyEGlockshuberRSpencerN D 2005 Protein-mediated boundary lubrication in arthroplasty Biomaterials 26 1165 1173 1165–73 10.1016/j.biomaterials.2004.05.020
   PubMed Web of Science ®Google Scholar
• WangAEssnerASchmidigG 2004 The effects of lubricant composition on in vitro wear testing of polymeric acetabular components J. Biomed. Mater. Res.—Part B Appl. Biomater. 68 45 52 45–52 10.1002/jbm.b.10077
   PubMed Web of Science ®Google Scholar
• MyantCUnderwoodRFanJCannP M 2012 Lubrication of metal-on-metal hip joints: The effect of protein content and load on film formation and wear J. Mechan. Behavior Biomed. Mater. 6 30 40 30–40 10.1016/j.jmbbm.2011.09.008
   PubMed Web of Science ®Google Scholar
• VrbkaMKřupkaIHartlMNávratT 2014 In situ measurements of thin films in bovine serum lubricated contacts using optical interferometry Proc. Inst. Mechan. Eng. H: J. Engin. Med. 228 149 58 149–58 0954411913517498
   Google Scholar
• Al MahmudKVarmanMKalamMMasjukiHMobarakHZulkifliN 2014 Tribological characteristics of amorphous hydrogenated (aC: H) and tetrahedral (ta-C) diamond-like carbon coating at different test temperatures in the presence of commercial lubricating oil Surf. Coat. Technol. 245 133 147 133–47 10.1016/j.surfcoat.2014.02.052
   Web of Science ®Google Scholar
• ChanS M TNeuC PKomvopoulosKReddiA H 2011 The role of lubricant entrapment at biological interfaces: reduction of friction and adhesion in articular cartilage J. Biomech. 44 2015 2020 2015–20 10.1016/j.jbiomech.2011.04.015
   PubMed Web of Science ®Google Scholar
• GhoshSChoudhuryDDasN SPingguan-MurphyB 2014 Tribological role of synovial fluid compositions on artificial joints—a systematic review of the last 10 years Lubricat. Sci. 26 387 410 387–410 10.1002/ls.1266
   Web of Science ®Google Scholar
• HodgeWFijanRCarlsonKBurgessRHarrisWMannR 1986 Contact pressures in the human hip joint measured in vivo Proc. Natl Acad. Sci. 83 2879 2883 2879–83 10.1073/pnas.83.9.2879
   Google Scholar
• MischlerSMunozA I 2013 Wear of CoCrMo alloys used in metal-on-metal hip joints: a tribocorrosion appraisal Wear 297 1081 1094 1081–94 10.1016/j.wear.2012.11.061
   Web of Science ®Google Scholar
• SprianoSVernèEFagaMBugliosiSMainaG 2005 Surface treatment on an implant cobalt alloy for high biocompatibility and wear resistance Wear 259 919 925 919–25 10.1016/j.wear.2005.02.011
   Web of Science ®Google Scholar
• ShroderRNemanichRGlassJ 1990 Analysis of the composite structures in diamond thin films by Raman spectroscopy Phys. Rev. B 41 3738 10.1103/PhysRevB.41.3738
   PubMed Web of Science ®Google Scholar
• MengFDavisTCaoJWangQ JHuaDLiuJ 2010 Study on effect of dimples on friction of parallel surfaces under different sliding conditions Appl. Surf. Sci. 256 2863 2875 2863–75 10.1016/j.apsusc.2009.11.041
   Web of Science ®Google Scholar
• GispertMSerroAColacoRSaramagoB 2006 Friction and wear mechanisms in hip prosthesis: comparison of joint materials behaviour in several lubricants Wear 260 149 158 149–58 10.1016/j.wear.2004.12.040
   Web of Science ®Google Scholar
• SheejaDTayBLauSNungL 2001 Tribological characterisation of diamond-like carbon coatings on Co–Cr–Mo alloy for orthopaedic applications Surf. Coat. Technol. 146 410 416 410–6 10.1016/S0257-8972(01)01425-6
   Web of Science ®Google Scholar
• ChingH AChoudhuryDNineM JOsmanN A A 2014 Effects of surface coating on reducing friction and wear of orthopaedic implants Sci. Technol. Adv. Mater. 15 014402 10.1088/1468-6996/15/1/014402
   PubMed Web of Science ®Google Scholar
• ChenS-YOuK-LHuangW-CChuK-TOuS-F 2013 Phase transformation of diamond-like carbon/silver composite films by sputtering deposition Ceram. Int. 39 2575 2580 2575–80 10.1016/j.ceramint.2012.09.019
   Web of Science ®Google Scholar
• Trunfio-SfarghiuA MBerthierYMeurisseM HRieuJ P 2007 Multiscale analysis of the tribological role of the molecular assemblies of synovial fluid. Case of a healthy joint and implants Tribol. Int. 40 1500 1515 1500–15 10.1016/j.triboint.2007.02.008
   Web of Science ®Google Scholar
• ChoudhuryDWalkerRRoyTPaulSMootanahR 2013 Performance of honed surface profiles to artificial hip joints: an experimental investigation Int. J. Precision Engin. Manufact. 14 1847 1853 1847–53 10.1007/s12541-013-0247-z
   Web of Science ®Google Scholar
• ChoudhuryDWalkerRShirvaniAMootanahR 2013 The influence of honed surfaces on metal-on-metal hip joints Tribol. Online 8 195 202 195–202 10.2474/trol.8.195
   Google Scholar
• JaoulCJarryOTristantPMerle-MejeanTColasMDublanche-TixierCJacquetJ-M 2009 Raman analysis of DLC coated engine components with complex shape: understanding wear mechanisms Thin Solid Films 518 1475 1479 1475–9 10.1016/j.tsf.2009.09.110
   Web of Science ®Google Scholar
• LiuYErdemirAMeletisE 1996 A study of the wear mechanism of diamond-like carbon films Surf. Coat. Technol. 82 48 56 48–56 10.1016/0257-8972(95)02623-1
   Web of Science ®Google Scholar
• RigneyDChenLNaylorM GRosenfieldA 1984 Wear processes in sliding systems Wear 100 195 219 195–219 10.1016/0043-1648(84)90013-9
   Web of Science ®Google Scholar