Experimental Characterization of a Toughened Epoxy Adhesive under a Large Range of Strain Rates

References

• Dunn , D. J. 2004 . Engineering and structural adhesives . Rapra Review Report , 15 : 1
   Google Scholar
• Imanaka , M. , Nakamura , Y. , Nishimura , A. and Iida , T. 2003 . Fracture toughness of rubber-modified epoxy adhesives: effect of plastic deformability of the matrix phase . Compos. Sci. Technol. , 63 : 41 – 51 .
   Web of Science ®Google Scholar
• Wang , X. , Xiao , K. , Ye , L. , Mai , Y. , Wang , C. and Rose , L. 2000 . Modelling mechanical properties of core shell rubber-modified epoxies . Acta Mater. , 48 : 579 – 586 .
   Web of Science ®Google Scholar
• Goglio , L. , Peroni , L. , Peroni , M. and Rossetto , M. 2008 . High strain-rate compressive and tension behaviour of an epoxy bi-component adhesive . Int. J. Adhes. Adhes. , 28 : 329 – 339 .
   Web of Science ®Google Scholar
• Duncan , B. and Dean , G. 2003 . Measurements and models for design with modern adhesives . Int. J. Adhes. Adhes. , 23 : 141 – 149 .
   Web of Science ®Google Scholar
• Berry , N. G. and d’Almeida , J. R. M. 2002 . The influence of circular centered defects on the performance of carbonepoxy single lap joints . Polym. Test. , 21 : 373 – 379 .
   Web of Science ®Google Scholar
• Deb , A. , Malvade , I. , Biswas , P. and Schroeder , J. 2007 . An experimental and analytical study of the mechanical behaviour of adhesively bonded joints for variable extension rates and temperatures . Int. J. Adhes. Adhes. , 23 : 1 – 15 .
   Google Scholar
• You , M. , Yan , Z. , Zheng , X. , Yu , H. and Li , Z. 2007 . A numerical and experimental study of gap length on adhesively bonded aluminum double-lap joint . Int. J. Adhes. Adhes. , 27 : 696 – 702 .
   Web of Science ®Google Scholar
• Dean , G. , Crocker , L. , Read , B. and Wright , L. 2004 . Prediction of deformation and failure of rubbertoughened adhesive joints . Int. J. Adhes. Adhes. , 24 : 295 – 306 .
   Web of Science ®Google Scholar
• Finogenov , G. N. 2007 . Creep assessment procedure for adhesive joints . Polym. Sci. , 49 ( 1 ) : 106 – 107 .
   Google Scholar
• de Morais , A. B. , Pereira , A. B. , Teixeira , J. P. and Cavaleiro , N. C. 2007 . Strength of epoxy adhesivebonded stainless-steel joints . Int. J. Adhes. Adhes. , 27 : 679 – 686 .
   Web of Science ®Google Scholar
• Derewonko , A. , Godzimirski , J. , Kosiuczenko , K. , Niezgoda , T. and Kiczko , A. 2007 . Strength assessment of adhesive-bonded joints . Comput. Mater. Sci. , 43 : 157 – 164 .
   Web of Science ®Google Scholar
• da Silva , L. , Adamsb , R. D. and Gibbsb , M. 2004 . Manufacture of adhesive joints and bulk specimens with high temperature adhesives . Int. J. Adhes. Adhes. , 24 : 69 – 83 .
   Web of Science ®Google Scholar
• Mengel , R. , Häberle , J. and Schlimmer , M. 2007 . Mechanical properties of hub/shaft a joints adhesively bonded and cured under hydrostatic pressure . Int. J. Adhes. Adhes. , 27 : 568 – 573 .
   Web of Science ®Google Scholar
• Chen , J. and Chang , F. 2001 . Temperature-dependent phase behavior in poly(e-caprolactone)epoxy blends . Polymer , 42 : 2193 – 2199 .
   Web of Science ®Google Scholar
• D’Almeira , J. R. M. and Monteiro , S. N. 1999 . The Iosipescu test method as a method to evaluate the tensile strength of brittle materials . Polym. Test. , 18 : 407 – 414 .
   Web of Science ®Google Scholar
• Melin , L. N. and Neumeister , J. M. 2006 . Measuring constitutive shear behavior of orthotropic composites and evaluation of the modified Iosipescu test . Compos. Struct. , 76 : 106 – 115 .
   Web of Science ®Google Scholar
• Rusinek , A. 2000 . Modélisation thermoviscoplastique dune nuance de tôle d’acier aux grandes vitesses de déformation. Etude expérimetale et numérique du cisaillement, de la traction et de la perforation , de l’Université de Metz . Thèse de Doctorat
   Google Scholar
• Beguelin , P. 1996 . Approche expérimentale du comportement mécanique des polymères en solicitation rapide , de l’Ecole Polytechnique Fédérale de Lausanne . Thèse de Doctorat
   Google Scholar
• Haugou , G. 2003 . Moyens d’essais et de caractérisation de lois de comportement matérielles en dynamique moyennes vitesses , Valenciennes : Université de Valenciennes et du Hainaut Cambrésis . Mémoire de Doctorat
   Google Scholar
• Chen , W. , Lu , F. and Cheng , M. 2002 . Tension and compressive tests of two polymers under quasi-static and dynamic loading . Polym. Test. , 21 : 113 – 121 .
   Web of Science ®Google Scholar
• Naik , N. K. and Perla , Y. 2008 . Mechanical behaviour of acrylic under high strain rate tensile loading . Polym. Test. , 27 : 504 – 512 .
   Web of Science ®Google Scholar
• Fu , S. , Wang , Y. and Wang , Y. 2009 . Tension testing of polycarbonate at high strain rates . Polym. Test. , 28 : 724 – 729 .
   Web of Science ®Google Scholar
• Albertini , C. and Montagnani , M. 1974 . “ Testing techniques based on the split Hopkinson bars ” . In Mechanical Properties at High Strain Rates Vol. 21 , 22 – 32 .
   Google Scholar
• Zhao , H. and Gary , G. 2002 . Behavior characterization of polymeric foams over a large range of strain rates . Int. J. Veh. Des. , 20 ( 3 ) : 135 – 145 .
   Google Scholar
• Zhao , H. 1997 . Testing of polymeric foams at high and medium strain rates . Polym. Test. , 16 : 507 – 516 .
   Web of Science ®Google Scholar
• Zhao , H. , Gary , G. and Klepaczko . 1997 . On the use of a viscoelastic split Hopkinson pressure bar . Int. J. Impact Engng , 19 : 319 – 330 .
   Web of Science ®Google Scholar
• Bussac , M.-N. , Collet , P. , Gary , G. , Lundberg , B. and Mousavi , S. 2008 . Visco elastic impact between a cylindrical striker and along cylindrical bar . Int. J. Impact Engng , 35 : 226 – 239 .
   Web of Science ®Google Scholar
• Hild , F. , Raka , B. , Baudequin , B. , Roux , S. and Cantelaube , F. 2002 . Multiscale displacement field measurements of compressed mineral-wool samples by digital image correlation . Appl. Optics , 41 : 3857 – 3872 .
   Web of Science ®Google Scholar
• Lauro , F. , Bennani , B. , Morin , D. and Epee , A. 2010 . The SEE method for determination of behaviour laws for strain rate dependent material: application to polymer material, Int . J. Impact Engng , 37 : 715 – 722 .
   Web of Science ®Google Scholar
• Lauro , F. , Morin , D. , Haugou , G. and Bennani , B. Application of SEE method on a multiphase steel . Society for Experimental Mechanics Proceedings . Albuquerque , , USA
   Google Scholar
• Lai , D. , Yakimets , I. and Guigon , M. 2005 . A non-linear viscoelastic model developed for semi-crystalline polymer deformed at small strains with loading and unloading paths . Mater. Sci. Eng. A , 405 : 266 – 271 .
   Web of Science ®Google Scholar
• Khan , A. S. , Lopez-Pamies , O. and Kazmi , R. 2006 . Thermo-mechanical large deformation response and constitutive modeling of viscoelastic polymers over a wide range of strain rates and temperatures . Int. J. Plasticity , 22 : 581 – 601 .
   Web of Science ®Google Scholar
• Richeton , J. , Schlatter , G. , Vecchio , K. S. , Rèmond , Y. and Ahzi , S. 2005 . A unified model for stiffness modulus of amorphous polymers across transition temperatures and strain rates . Polymer , 46 : 8194 – 8201 .
   Web of Science ®Google Scholar
• Zairi , F. , Nait-Abdelaziz , M. , Gloaguen , J. M. and Lefebvre , J. M. 2008 . Modelling of the elasto viscoplastic damage behaviour of glassy polymers . Int. J. Plasticity , 24 : 945 – 965 .
   Web of Science ®Google Scholar
• G’Sell , C. , Aly-Helal , N. A. and Jonas , J. J. 1983 . Effect of stress triaxiality on neck propagation during the tensile stretching of solid polymers . J. Mater. Sci. , 18 : 1731 – 1742 .
   Web of Science ®Google Scholar
• Roscoe , K. H. and Burland , J. B. 1968 . “ On the generalized stress/strain behaviour of wet clay ” . In Engineering Plasticity , Edited by: Heyman , J. and Leckie , F. A. 535 – 609 . Cambridge : Cambridge University Press .
   Google Scholar