Mechanical properties of knitted fabric reinforced polypropylene composites

References

• Vautey , P. 1990 . Cooling rate effects on the mechanical properties of a semi-crystalline thermoplastic composite . SAMPE Quart. , 21 : 23 – 28 .
   Google Scholar
• Cantwell , W. J. 1990 . The effect of cooling rate on deformation and fracture in IM6/PEEK composites . Comp. Struct. , 14 : 151 – 171 .
   Google Scholar
• Ye , L. , Beehag , A. and Friedrich , K. 1995 . Mesostructural aspects of interlaminar fracture in thermoplastic composites: is crystalline a key? . Comp. Sci. Technol. , 53 : 167 – 173 .
   Google Scholar
• Beehag , A. and Ye , L. 1996 . Role of cooling pressure on interlaminar fracture properties of commingled CF/PEEK composites . Composites, Part A , 27A : 175 – 182 .
   Google Scholar
• Mayer , J. , Ruffieux , K. , Tognini , R. and Wintermantel , E. Knitted carbon fibers, a sophisticated textile reinforcement that offers new perspectives in thermoplastic composite processing . Proc. of ECCM6 . Edited by: Bunsell , A. R. , Kelly , A. and Massiah , A. pp. 219 – 224 . Bordeaux : Woodhead Publishing Limited .
   Google Scholar
• Ramakrishna , S. , Fujita , A. , Cuong , N. K. and Hamada , H. Tensile Failure Mechanisms of Knitted Glass Fiber Fabric Reinforced Epoxy Composites . Proc. of 4th Japan International SAMPE Symposium & Exhibition . Edited by: Maekawa , Z. , Nakata , E. and Sakatani , Y. Vol. I , pp. 661 – 666 . Tokyo
   Google Scholar
• Phillips , D. and Verpoest , I. Sandwich panels produced from 3D-knitted structures . Proc. of 40th International SAMPE Symposium . pp. 957 – 965 . Anaheim , California
   Google Scholar
• Ko , F. K. , Pastore , C. M. , Yang , J. M. and Chou , T. W. 1986 . “ Structure and properties of multilayer multidirectional warp knit fabric reinforced composites ” . In Composites '86: Recent Advances in Japan and The United States , Edited by: Kawata , K. , Umekawa , S. and Kobayashi , A. 21 – 28 . Tokyo : Japan Society for Composite Materials .
   Google Scholar
• Ramakrishna , S. , Hamada , H. and Cuong , N. K. 1994 . Fabrication of knitted glass fiber fabric reinforced thermoplastic composite laminates . J. Adv. Comp. Let. , 3 : 189 – 192 .
   Google Scholar
• Ramakrishna , S. , Hamada , H. , Cuong , N. K. and Maekawa , Z. Mechanical properties of knitted fabric reinforced thermoplastic composites . In Proc. of ICCM-10 . Edited by: Poursartip , A. and Street , K. Vol. IV , pp. 245 – 252 . Vancouver : Woodhead Publishing Limited .
   Google Scholar
• 1990 . Service instructions, TA-4000 thermal analysis, measurement and evaluation system, Version 6.7, Mettler Instrument AG, GH-8606 Greifensee Switzerland
   Google Scholar
• Hull , D. 1981 . An Introduction to Composite Materials , 14 – 33 . Cambridge , , UK : Cambridge University Press .
   Google Scholar
• Butler , H. M. , Bannister , D. J. and Young , R. J. 1996 . A study of transcrystalline polypropylene/ single?aramid?fiber pull-out behavior using Raman spectroscopy . Composites, Part A , 27A : 833 – 838 .
   Google Scholar
• Ye , L. and Friedrich , K. 1993 . Mode I interlaminar fracture of co-mingled yarn based glass/ polypropylene composites . Compos. Sci. Technol. , 46 : 187 – 198 .
   Web of Science ®Google Scholar
• Hoecker , F. and Karger-Kocsis , J. 1993 . Effects of matrix microstructure on interfacial strength in GF/PP examined by a single fiber pull-out technique . Mechanics Compos. Mater. , 29 : 723 – 733 .
   Google Scholar