Deformation and Fracture Behavior of PP/Ash Composites

References

• Bose , S. and Mahanwar , P. A. 2004 . Effect of flyash on the mechanical, thermal, dielectric, rheological and morphological properties of filled Nylon-6 . J. Miner. Mater. Charact. Engng , 3 : 65 – 72 .
   Google Scholar
• Stefani , P. M. , Cyras , V. , Tejeira Barchi , A. and Vázquez , A. 2006 . Mechanical properties and thermal stability of rice husk ash filled epoxy foams . J. Appl. Polym. Sci. , 99 : 2957 – 2965 .
   Web of Science ®Google Scholar
• Stefani , P. M. , García , D. , Lopez , J. and Jiménez , A. 2005 . Thermogravimetric analysis of composites obtained from sintering of rice husk-scrap tire mixtures . J. Therm. Anal. Cal. , 81 : 315 – 320 .
   Web of Science ®Google Scholar
• Chaudhary , D. S. , Jollands , M. C. and Cser , F. 2004 . Recycling rice hull ash: a filler material for polymeric composites? . Adv. Polym. Tech. , 23 : 147 – 155 .
   Web of Science ®Google Scholar
• Wang , M. , Shen , Z. , Cai , C. , Ma , S. and Xing , Y. 2004 . Experimental investigations of polypropylene and poly(vinyl chloride) composites filled with plerospheres . J. Appl. Polym. Sci. , 92 : 126 – 131 .
   Web of Science ®Google Scholar
• Siriwardena , S. , Ismail , H. and Ishiaku , U. S. 2000 . Effect of mixing sequence in the preparation of white rice husk ash filled polypropylene/ethylene-propylene-diene monomer blend . Polymer Testing , 20 : 105 – 113 .
   Web of Science ®Google Scholar
• Siriwardena , S. , Ismail , H. and Ishiaku , U. S. 2003 . A comparison of the mechanical properties and water absorption behavior of white rice husk ash and silica filled polypropylene composites . J. Reinf. Plast. Compos. , 22 : 1645 – 1667 .
   Web of Science ®Google Scholar
• Ismail , H. , Hong , H. B. , Ping , C. Y. and Abdul Khalil , H. P. S. 2002 . The effects of a compatibilizer on the properties of polypropylene/silica/white rice husk ash hybrid composites . J. Reinf. Plast. Compos. , 21 : 1685 – 1712 .
   Web of Science ®Google Scholar
• Kruger , R. A. , Hovy , M. and Wardle , D. The use of fly ash filler in rubber . Proc. Intl Ash Utilization Symposium, Paper 72 . Kentucky , USA.
   Google Scholar
• Hwang , J. Y. Beneficial Use of Fly Ash , USA : National Energy Technology Department, US Department of Energy . http://www.netl.doe.gov/
   Google Scholar
• Chand , N. and Vashishtha , S. R. 2000 . Melt flow studies of flyash particulate filted pp/pMMA blend . Clay Research , 19 : 49 – 56 .
   Google Scholar
• Chand , N. , Khare , N. and Indian , J. 1999 . Effect of coupling agents on the mechanical properties of fly ash composites . Engng Mater. Sci. , 6 : 342
   Google Scholar
• Chand , N. and Khare , N. 2000 . Effect of flyash loading on dielectric relaxation of polypropylene/low density polyethylene blends . Met. Mater. Process , 12 : 319 – 326 .
   Google Scholar
• Chand , N. and Pandey , A. 2000 . High stress abrasive wear study on flyash filled polypropylene/ polystryrene blends . Met. Mater. Process , 12 : 91 – 95 .
   Google Scholar
• Pionteck , J. , Sadhu , V. B. , Jakisch , L. , Pötschke , P. , Häubler , L. and Janke , A. 2005 . Crosslinkable coupling agents: synthesis and use for modification of interfaces in polymer blends . Polymer , 46 : 6563 – 6574 .
   Web of Science ®Google Scholar
• Thongsang , S. and Sombatsompop , N. 2005 . Effect of NaOH and Si69 treatments on the properties of fly ash/natural rubber composites . Polym. Compos. , 27 : 30 – 40 .
   Web of Science ®Google Scholar
• Pardo , S. G. , Bernal , C. , Abad , M. J. and Cano , J. Composite materials based on polypropylene reinforced with fly ash . J. Appl. Polym. Sci. , submitted
   Google Scholar
• 2003 . Standard test method of tensile properties of plastics; ASTM D638-03 , New York , , USA : American Society for Testing and Materials .
   Google Scholar
• 1993 . Standard test methods for plane-strain fracture toughness and energy release rate determination of plastics materials; ASTM D5045-93 , New York , , USA : American Society for Testing and Materials .
   Google Scholar
• Adams , M. J. , Williams , D. and Williams , J. G. 1989 . The use of linear elastic fracture mechanics for particulate solids . J. Mater. Sci. , 24 : 1772 – 1776 .
   Web of Science ®Google Scholar
• Matsunaga , T. , Kim , J. K. , Hardcastle , S. and Rohatgi , P. K. 2002 . Crystallinity and selected properties of fly ash particles . Mat. Sci. Engng , 325 : 333 – 343 .
   Web of Science ®Google Scholar
• Stocchi , A. , Vázquez , A. and Bernal , C. Deformation and fracture behavior of vinylester/fly ash composites . Polym. Compos. , submitted
   Google Scholar
• Won , S.-C. and Mai , Y.-W. 1999 . Effect of rubber functionality on microstructures and fracture toughness of impact-modified nylon 6,6/polypropylene blends: 1. Structure-property relationships . Polymer , 40 : 1553 – 1566 .
   Web of Science ®Google Scholar
• Frontini , P. M. and Fave , A. 1995 . The effect of annealing temperature on the fracture performance of isotactic polypropylene . J. Mater. Sci. , 30 : 2446 – 2454 .
   Web of Science ®Google Scholar
• Santarelli , E. and Frontini , P. 2001 . The effects of specimen size and testing conditions on fracture toughness evaluation of polypropylene homopolymer . Polym. Engng. Sci. , 41 : 1803 – 1814 .
   Web of Science ®Google Scholar
• Williams , J. G. 1984 . Fracture Mechanics of Polymers , London , , UK : Ellis Horwood Limited .
   Google Scholar
• Gensler , R. , Plummer , C. J. G. , Grein , C. and Kausch , H. H. 2000 . Influence of the loading rate on the fracture resistance of isotatic polypropylene and impact modified isotactic polypropylene . Polymer , 41 : 3809 – 3819 .
   Web of Science ®Google Scholar
• Vu-Khanh , T. and Fisa , B. 1990 . Effects of fillers on fracture performance of thermoplastics: strain energy density criterion . Theor. Appl. Fracture Mech. , 13 : 11 – 19 .
   Web of Science ®Google Scholar
• Vu-Khanh , T. and Fisa , B. 1986 . Fracture behavior of mica-reinforced polypropylene: effects of coupling agent, flake orientation, and degradation . Polym. Compos. , 77 : 219 – 226 .
   Google Scholar
• Kim , G. M. and Michler , G. H. 1998 . Micromechanical deformation processes in toughened and particlefilled semicrystalline polymers: Part 1. Characterization of deformation processes in dependence on phase morphology . Polymer , 39 : 5689 – 5697 .
   Web of Science ®Google Scholar
• Kim , G. M. and Michler , G. H. 1998 . Micromechanical deformation processes in toughened and particlefilled semicrystalline polymers. Part 2: Model representation for micromechanical deformation processes . Polymer , 39 : 5699 – 5703 .
   Web of Science ®Google Scholar
• Zuiderdein , W. C. J. , Westzaan , C. , Huétink , J. and Gaymans , R. J. 2003 . Toughening of polypropylene with calcium carbonate particles . Polymer , 44 : 261 – 275 .
   Web of Science ®Google Scholar
• Lazzeri , A. , Zebarjad , S. M. , Pracella , M. , Cavalier , K. and Rosa , R. 2005 . Filler toughening of plastics. Part 1. The effect of surface interactions on physico-mechanical properties and rheological behaviour of ultrafine CaCO3/HDPE nanocomposites . Polymer , 46 : 827 – 844 .
   Web of Science ®Google Scholar
• Thio , Y. S. , Argon , A. S. and Cohen , R. E. 2004 . Role of interfacial adhesion strength on toughening polypropylene with rigid particles . Polymer , 45 : 3139 – 3147 .
   Web of Science ®Google Scholar
• Bartczak , Z. , Argon , A. S. , Cohen , R. E. and Weinberg , M. 1999 . Toughness mechanism in semicrystalline polymer blends: II. High-density polyethylene toughened with calcium carbonate filler particles . Polymer , 40 : 2347 – 2365 .
   Web of Science ®Google Scholar
• Moratoglu , O. K. , Argon , A. S. , Cohen , R. E. and Weinberg , M. 1995 . Toughening mechanism of rubbermodified polyamides . Polymer , 36 : 921 – 930 .
   Web of Science ®Google Scholar
• Wilbrink , M. W. L. , Argon , A. S. , Cohen , R. E. and Weinberg , M. 2001 . Toughenability of Nylon-6 with CaCO3 filler particles: new findings and general principles . Polymer , 42 : 10155 – 10180 .
   Web of Science ®Google Scholar
• Thio , Y. S. , Argon , A. S. , Cohen , R. E. and Weinberg , M. 2002 . Toughening of isotactic polypropylene with CaCO3 particles . Polymer , 43 : 3663 – 3674 .
   Web of Science ®Google Scholar