Corrosion of metallic implants

References

• B. C. SYRETT and A. ACHARYA (eds.): 'Corrosion and degradation of implant materials', STP 684; 1979, Philadelphia, PA, ASTM.
   Google Scholar
• A. C. FRAICER and C. D. GRIFFIN (eds.): 'Corrosion and degradation of implant materials', STP 859; 1985, Philadelphia, PA, ASTM.
   Google Scholar
• S. JENSEN: Rigshospitalet, Copenhagen, personal communication.
   Google Scholar
• J. KRUGER: 'Fundamental aspects of the corrosion of metallic implants', in Ref. 1, pp. 107–127.
   Google Scholar
• L. L. HENCH and E. C. ETHRIDGE: in 'Biomaterials. An interfacial approach', 106–111; 1982, New York, Academic Press.
   Google Scholar
• G. K. SMITH and J. BLACK: 'Estimation of in vivo type 3I6L stainless steel corrosion rate from blood transport and organ accumulation data', in Ref. 2, pp. 223–247.
   Google Scholar
• P. G. LAING: Proc. Symp. on 'Retrieval and analysis of orthopedic implants', Gaithersburg,MD, April 1977, National Bureau of Standards (NBS SP472), 31.
   Google Scholar
• K. MERRITT and S. A. BROWN: 'Biological effects of corrosion products from metals', in Ref. 2, pp. 195–207.
   Google Scholar
• P. G. LAING: 'Clinical experience with prosthetic materials: historical perspectives, current problems and future directions', in Ref. 1, pp. 199–211.
   Google Scholar
• K. NIELSEN and H. P. NIELSEN: 'Metallurgiske undersogelser af implantater, Skinner af rustfrit stal', Report 195–2417, The Danish Corrosion Centre, Brondby, 1985.
   Google Scholar
• V. J. COLANGELO, N. D. GREENE, D. B. KETTLEKAMP, H. ALEXANDER, and C. J. CAMPBELL: Biomed. Maier. Res., 1967, 1, 405–414.
   PubMedGoogle Scholar
• N. D. GREENE: 'Corrosion of surgical implant alloys: a few basic ideas', in Ref. 2, pp. 5–10.
   Google Scholar
• T. P. HOAR and D. C. MEARS: Proc. R. Soc., 1966, 294A, 486–510.
   Google Scholar
• M. POURBAIX: Proc. 'Biointeractions '84', London, January1984, Vol. 5.
   Google Scholar
• A. C. FRAICER, A. W. RUFF, P. SUNG, A. C. VAN ORDEN, and K. M. SPECK: in 'Titanium alloys in surgical implants', (ed.H. A. Luckey and F. Kubli), STP 796, 206–219; 1983, Philadelphia, PA, ASTM.
   Google Scholar
• B. C. SYRETT Proc. 'Corrosion '86', paper 116; 1976, Houston, TX, NACE.
   Google Scholar
• B. C. SYRETT and E. E. DAVIS: 'Crevice corrosion of implant alloys — a comparison of in vitro and in vivo studies', in Ref. 1, pp. 229–244.
   Google Scholar
• F. N. MARZULLI and H. I. MAIBACH: 'Dermato-toxicology', 2nd edn; New York, McGraw-Hill.
   Google Scholar
• M. A. IMAM, A. C. FRAKER, and C. M. GILMORE: 'COTTOSIOTI fatigue of 316L stainless steel, Co—Cr—Mo alloy, and ELI Ti-6A1-4V', in Ref. 1, pp. 128–143.
   Google Scholar
• L. E. SLOTER and H R. PIEHLER: 'Corrosion fatigue performance of stainless steel hip nails — Jewett type', in Ref. 1, pp. 173–195.
   Google Scholar
• H. R. PIEHLER, M. A. PORTNOFF, L. E. SLOTER, E. J. VEGDAHL, J. L. GILBERT, and M. J. WEBER: 'Corrosion fatigue performance of hip nails: the influence of materials selection and design', in Ref. 2, pp. 93–104.
   Google Scholar
• V. J. COLANGELO and N. D. GREENE: J. Biomed. Mater. Res., 1969, 3, 247–265.
   PubMed Web of Science ®Google Scholar
• A. M. WEINSTEIN, W. P. SPIRES, JR, J. J. KLAWITTER, A. J. T. CLEMOW, and J. O. EDMUNDS: 'Orthopedic implant retrieval and analysis study', in Ref. 1, pp. 212–228.
   Google Scholar
• H. S. DOBBS and J. T. SCALES: 'Fracture and corrosion in stainless steel total hip replacement stems', in Ref. 1, pp. 245–258.
   Google Scholar
• K. J. BUNDY and V. H. DESAI: 'Studies of stress corrosion cracking behaviour of surgical implant materials using a fracture mechanics approach', in Ref. 2, pp. 73–90.
   Google Scholar
• J. P. SHEEHAN, C. R. MORIN, and K. F. PACKER: 'Study of stress corrosion cracking susceptibility of type 316L stainless steel in vitro', in Ref. 2, pp. 57–72.
   Google Scholar
• P. KUMAR, A. J. HICKS, A. I. ASPHAHANI, and A. LAWLEY: 'Properties and characteristics of cast, wrought, and powder metallurgy processed cobalt—chromium—molybdenum implant materials', in Ref. 2, pp. 30–56.
   Google Scholar
• A. STURLASON and E. W. LANGER: Scand. J. Metall., 1985, 14, 313–315.
   Google Scholar
• R. J. SOLAR: 'Corrosion resistance of titanium surgical implant alloys: a review', in Ref. 1, pp. 259–273.
   Google Scholar
• R. J. SOLAR, S. R. POLLACK, and E. KOROSTOFF: 'Titanium release from implants: a proposed mechanism', in Ref. 1, pp. 161–172.
   Google Scholar
• S. T. OLESEN: Implanterbare materialer', Report ECN-31, Elektronikcentralen, Horsholm, February1980.
   Google Scholar