References
- R. ECK, J. EITER and W. GLATZLE: Met. Powder Rep. , 1987, 42, (7/8), 536–537.
- H. I. BAKAN: ‘An investigation in the sintering behaviour of the Cu-25 wt-%Cr contact materials produced by powder metallurgy technique’, PhD Thesis, Istanbul Technical University, Istanbul, Turkey, 1999.
- P. FREY, N. KLINK, R. MICHAL and K. E. SAEGER: IEEE Trans. Plasma Sci. , 1989, 17, (5), 734–740.
- P. G. SLADE: IEEE Trans. Components Packing Manuf. Technol., A, 1994, 17, (1), 96–99.
- T. OKIJTOMU, T. SEKI, A. YAMAMOTU, M. OKAWA, T. SEKIGUCHI and Y. MAJIMA: ‘Process for manufacturing a contact materials for vacuum circuit breaker’, US Patent No. 5403543, USA Patent Office, Washington, DC, 1995.
- R. WATANABE, H. ANDOH, K. IWASHITA and K. SHIMIZU: ‘Method for making vacuum circuit breaker electrodes’, US Patent No. 4836 978, USA Patent Office, Washington, DC, 1989.
- B. DING, H. LI, X. WANG and J. WANG: IEEE Trans. Components, Hybrids Manuf. Technol. , 1991, 14, (2), 386–391.
- W. F. RIEDER, M. SCHUSSEK, W. GLATZLE and E. KNY: IEEE Trans. Components, Hybrids Manuf. Technol. , 1989, 12, (2), 273–283.
- W. F. CHU and A. RAHMEL: Metall. Trans., B, 1979,10, (3), 401–407.
- A. KOSTKOWSKI: 12th Int. Plansee Seminar, Tyrol, Austria, 1989, Vol. 1, 597–608.
- O. KUBASCHEWSKI, E. LL.EVANS and C. B. ALCOCK: ‘Metallurgical thermochemistry’, 4th edn, Vol. 1,318; 1967, Oxford, Pergamon.
- L. M. BERGER, S. STOLE, W. GRUNER and K. WETZIG: Int. J. Refract. Met. Hard Mater. , 2001, 19, (2), 109–121.
- S. SPAIC, M. KOMAC and A. FETAHAGIC: Mater. Sci. Technol, 1989, 5, 1069–1073.
- J. B. CORREIA, H. A. DAVIES and C. M. SELLARS: Acta Mater. , 1997, 45, (1), 177–190.
- Y. JIN, K. ADACHI, T. TAKEUCHI and H. G. SUZUKI: J. Mater. Sci. , 1998, 33, 1333-1341.
- Y. JIN, K. ADACHI, T. TAKEUCHI and H. G. SUZUKI: Metall. Mater. Trans. A, 1998, 29A, 2195–2203.
- H. I. BAKAN, S. OZBEK, T. BAYKARA and E. S. KAYALI: ‘Reduction of surface oxide of chromium powders’, Turkish Patent No. TR 1997 00324 B, Turkish Patent Institute, Ankara, 1997.
- P. W. TAUBENBLAT: Int. J. Powder Metall. , 1974,10, (3), 169–184.
- T. PISZCZEK and S. STOLARZ: Powder Metall. Int. , 1986, 18, (1), 9–11.
- M. J. DOMBROSKI, A. LAWLEY, D. APELIAN and P. W. TAUBENBLAT: Annual Powder Metallurgy Conf., Dallas, TX, May 1987, MP1F, Vol. 43, 303-322.
- J. F. SWEET, M. J. DOMBROSKI and A. LAWLEY: Int. J. Powder Metall. , 1992, 28, (1), 41–51.