References
- Suryanarayana C: ‘Mechanical alloying and milling’, Prog. Mater. Sci., 2001, 46, 1–184.
- Krakhmalev PV: ‘Preparation of Mo(Si,Al) 2–ZrO2 nanocomposite powders by mechanical alloying’, Int. J. Refract. Met. Hard Mater., 2004, 22, 205–209.
- Li Z, Peng LM: ‘Ultra-high temperature Mo–Si–B alloys – synthesis, microstructural and mechanical characterization’, Mater. Lett., 2008, 62, 2229–2232.
- Jehanno P, Heilmaier M, Saage H, Heyse H, Boning M, Kestler H, Schneibel JH: ‘Superplasticity of a multiphase refractory Mo–Si–B alloy’, Scr. Mater., 2006, 55, 525–528.
- Jehanno P, Heilmaier M, Kestler H: ‘Characterization of an industrially processed Mo-based silicide alloy’, Intermetallics, 2004, 12, 1005–1009.
- Kuznetsov SA, Rebrov EV, Mies MJM, de Croon MHJM, Schouten JC: ‘Synthesis of protective Mo–Si–B coatings in molten salts and their oxidation behaviour in an air-water mixture’, Surf. Coat. Technol., 2006, 201, 971–978.
- Jain P, Alur AP, Kumar KS: ‘High temperature compressive flow behaviour of a Mo–Si–B solid solution alloy’, Scr. Mater., 2006, 54, 13–17.
- Yamauchi A, Yoshimi K, Kurokawa K, Hanada S: ‘Synthesis of Mo–Si–B in situ composites by mechanical alloying’, J. Alloys Compd, 2007, 434–435, 420–423.
- Mitra R, Srivastava AK, Prasad NE, Kumari S: ‘Microstructure and mechanical behaviour of reaction hot pressed multiphase Mo–Si–B and Mo–Si–B–Al intermetallic alloys’, Intermetallics, 2006, 14, 1461–1471.
- Paswan S, Mitra R, Roy SK: ‘Isothermal oxidation behaviour of Mo–Si–B and Mo–Si–B–Al alloys in the temperature range of 400–800°C’, Mater. Sci. Eng. A, 2006, A424, 251–265.
- Sakidja R, Park JS, Hamann J, Perepezko JH: ‘Synthesis of oxidation resistant silicide coatings on Mo–Si–B alloys’, Scr. Mater., 2005, 53, 723–728.
- Alur AP, Kumar KS: ‘Monotonic and cyclic crack growth response of a Mo–Si–B alloy’, Acta Mater., 2006, 54, 385–400.
- Alur AP, Chollacoop N, Kumar KS: ‘High-temperature compression behaviour of Mo–Si–B alloys’, Acta Mater., 2004, 52, 5571–5587.
- Fan X, Ishigaki T: ‘Mo5Si3–B and MoSi2 deposits fabricated by radio frequency induction plasma spraying’, J. Therm. Spray Technol., 2001, 10, (4), 611–617.
- Fan X, Ishigaki T: ‘Mo5Si3-boron composites fabricated by induction plasma deposition and their high-temperature oxidation resistance’, J. Am. Ceram. Soc., 1999, 82, (8), 1965–1968.
- Kang P, Yin Z: ‘Phase formation during annealing as-milled powders of molybdenum disilicide’, Mater. Lett., 2003, 57, 4412–4417.
- Zhang H, Liu X: ‘Analysis of milling energy in synthesis and formation mechanisms of molybdenum disilicide by mechanical alloying’, I. J. Refractory Metals & Hard Materials, 2001, 19, 203–208.
- Zuo K, Xi S, Zhou J: ‘Structure evolution and thermodynamics analysis of MoSi2 during mechanical alloying’, Mater. Sci. Eng. A, 2007, A445–A446, 48–53.
- Kang PC, Yin ZD: ‘Formation mechanism and nanocrystalline phase transformation of molybdenum disilicide by mechanical alloying’, Nanotechnology, 2004, 15, 851–855.
- Nowotny H, Dimakopoulou E, Kudielka H: ‘Untersuchungen in den dreistoffsystemen: molybdan–silizium–bor, wolfram–silizium–bor und in dem system: VSi2–TaSi2’, Chem. Mon., 1957, 88, 180–192.
- Strutt PR, Kear BH, Boland RF: ‘Method of manufacture of nanostructured feeds’, US patent no. 6025034, 2000.
- Bakhshi SR, Salehi M, Edris H, Borhani GH: ‘Structural evaluation of Mo–Si–B multiphase alloy during mechanical alloying and heat treatment’, Powder Metall., 2008, 51, (2), 119–124.
- Zhang DL: ‘Phase formation during mechanical alloying of Mo and Si powders’, J. Mater. Sci. Lett., 1995, 14, 1508–1511.