References
- L. Blanco, M. Campos, J. M. Torralba and D. Klint: ‘Quantitative evaluation of porosity effects on sintered and heat treated high performance steels’, Powder Metall. , 2005, 48, 315–322.
- N. Chawla and X. Deng: ‘Effect of porosity on the microstructure and mechanical behaviour of powder metallurgy Fe—Ni—Mo steels’, Proc. PM2TEC Conf., Las Vegas, NV, USA, June 2003, APMI/ MPIF, Part 7, 257-269.
- T. M.Cimino, A. H. Graham, T. F. Murphy and A. Lawley: ‘The effect of microstructure and pore morphology in mechanical and dynamic properties of ferrous PM materials’, Proc. PM2TEC Conf., Vancouver, Canada, June 1999, APMI/MPIF, Part 7, 65-84.
- T. Marcu Puscas, M. Signorini, A. Molinari and G. Straffelini: ‘Image analysis investigation of the effect of the process variables on the porosity of sintered chromium steels’, Mater. Charact. , 2003, 50, 1–10.
- A. Bergmark and L. Alzati: ‘Fatigue crack paths in Cu—Ni—Mo Alloyed PM steel’, Fatigue Fract. Eng. Mater. Struct. , 2004, 28, 229-235, Part 7, 270-278.
- O. Bergman and A. Bergmark: ‘Influence of microstructure on the fatigue performance of PM steels’, Proc. PM2TEC Conf., Las Vegas, NV, USA, June 2003, APMI/MPIF, Part 7, 270-278.
- X. Deng, G. B. Piotrowski and N. Chawla: ‘Fatigue crack growth of prealloy Fe-0•85Mo-2Ni-0.6C steels with a homogeneous microstructure’, Proc. PM2TEC Conf., Montreal, Canada, June 2005, APMI/MPIF, Part 7, 111-124.
- G. B. Piotrowski, X. Deng and N. Chawla: ‘Fatigue crack grown of Fe-0•85Mo-2Ni-0.6C steels with a heterogeneous microstructure’, Proc. PM2TEC Conf., Chicago, IL, USA, June 2004, APMI/ MPIF, 86-97.
- A. Lawley and T. F. Murphy: `Metallography of powder metallurgy materials', Mater. Charact. , 2003, 51, 315–327.
- B. Roebuck, M. Stewart and M. Brooks: ‘Mapping indentation hardness’, Report DEPC MN030, NPL, Teddington, UK, 2005.
- K. R. Trethewey, M. Wenman, P. Chard-Tuckey and B. Roebuck: ‘Correlation of meso- and micro-scale hardness measurements with the pitting of plastically deformed type 304L stainless steel’, Corros. Sci. , 2008,50, 1132–1141.
- B. Roebuck, K. P. Mingard, M. Brooks, E. J. Palmiere, B. Wynne and M. J. Thomas: ‘Mapping microstructure in AC and PSC testpieces deformed at high temperature’, Comput. Methods Mater. Sci. , 2008, 7, 406–415
- W. C. Oliver and G. M. Pharr: J. Mater. Res. , 1992, 7, 1564–1583.
- F. J. Humphreys: `Grain and subgrain characterisation by electron backscattered diffraction', J. Mater. Sci. , 2001, 36, 3833–3854.
- V. Randle: `Microtexture determination and its applications', 2nd edn; 2003, London, Institute of Materials/Maney.
- D. Dingley: ‘Progressive Steps in the development of electron backscatter diffraction and orientation imaging microscopy’, J. Microsc. , 2004, 213, 214–224.
- ‘Instrumented indentation hardness measurement’, IS 014577, ISO, Geneva, Switzerland, 2002.
- R. L. Higginson and C. M. Sellars: ‘Worked examples in quantitative metallography’; 2003, London, Maney/IoM3.
- ‘Metallic materials — instrumented indentation test for hardness and materials parameters’, ISO 14577-1:2002, ISO, Geneva, Switzerland, 2002.
- M. M. Nowell, S. I. Wright and J. O. Carpenter: ‘A practical investigation into identifying and differentiating phases in steel using EBSD’, Proc. 15th Int. Conf. on ‘Texture of materials’, Pittsburgh, PA, USA, June 2008, American Ceramic Society/ TMS.