Advanced search
Publication Cover
Powder Metallurgy Volume 54, 2011 - Issue 2
Journal homepage
119
Views
4
CrossRef citations to date
0
Altmetric
Original Article

Effect of cutting parameters on cutting force and surface roughness in milling alumina reinforced Al–6Zn–2Mg–2Cu composites

M Übeyli Department of Mechanical Engineering, Osmaniye Korkut Ata University, Karacaoglan Yerleskesi, 80000OsmaniyeTurkeyCorrespondence[email protected]
,
A Acır Department of Mechanical EducationFaculty of Technical Education, Gazi University, 06500Teknikokullar, Ankara, Turkey
,
Ö Keleş Department of Mechanical EngineeringFaculty of Engineering and Architecture, Gazi University, 06570Maltepe, Ankara, Turkey
&
C E Akçay Department of Mechanical EngineeringFaculty of Engineering and Architecture, Gazi University, 06570Maltepe, Ankara, Turkey
Pages 172-176 | Received 26 Aug 2008, Accepted 03 Dec 2008, Published online: 12 Nov 2013

References

  • Quigley O, Monaghan J, O’Reilly P: ‘Factors affecting the machinability of an Al/SiC metal-matrix composite’, J. Mater. Process. Technol., 1994, 43, 21–36.
  • Chambers AR: ‘The machinability of light alloy MMCs’, Composites Part A, 1996, 27A, 143–147.
  • Hung NP, Boey FYC, Khor KA, Phua YS, Lee HF: ‘Machinability of aluminum alloys reinforced with silicon carbide particulates’, J. Mater. Process. Technol., 1996, 56, 966–977.
  • El-Gallab M, Sklad M: ‘Machining of Al/SiC particulate metal-matrix composites part I: tool performance’, J. Mater. Process. Technol., 1998, 83, 151–158.
  • Coelho RT, Yamada S, IeRoux T, Aspinwall DK, Wise MLH: ‘Conventional machining of an aluminum based SiC reinforced metal matrix composite (MMC) alloy’, Proc. 30th MATADOR, Manchester, UK, March 1993, UMIST, 125–133.
  • Cronjager L, Meister D: Machining of fibre and particle-reinforced aluminum: Ann. CIRP, 1992, 41, 63–66.
  • Chandrasekaran H, Johansson J-O: ‘On the behaviour of fibre/particle reinforced aluminum alloy matrix composites in milling and grinding’, Proc. 2nd Int. Conf. on ‘Machining of advanced materials (MAM)’, Aachen, Germany, October 1996, VDI-Berichte.
  • Karakaş MS, Acır A, Übeyli M, Ögel B: ‘Effect of cutting speed on tool performance in milling of B4Cp reinforced aluminum metal matrix composites’, J. Mater. Process. Technol., 2006, 178, 241–246.
  • Übeyli M, Karakaş MS, Acır A, Ögel B: ‘Study on performance of uncoated and coated tools in milling of Al-4%Cu/B4C metal matrix composites’, Mater. Sci. Technol., 2007, 23, (8), 945–950.
  • Übeyli M, Acır A, Karakaş MS, Demir T: ‘On the surface roughness of Al-4%Cu/B4C metal matrix composites machined by milling operation’, Sci. Eng. Compos. Mater., 2008, 15, 131–139.
  • Übeyli M, Acır A, Karakaş MS, Ögel B: ‘Effect of feed rate on tool wear in milling of Al-4% Cu/B4Cp composite’, Mater. Manuf. Process., 2008, 23, 865–870.
  • Reddy NSK, Sup SK, Yang M: ‘Experimental study of surface integrity during end milling of Al/SiC particulate metal–matrix composites’, J. Mater. Process. Technol., 2008, 201, 574–579.
  • Sun FH, Wu ZY, Zhong JW, Chen M: ‘High speed milling of SiC particle reinforced aluminum-based MMC with coated carbide inserts’, Key Eng. Mat., 2004, 274–276, 457–462.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.