Quantitative characterisation of substructural development during warm working of an interstitial free steel

References

• K. I. NILSSON and E. JOHNSSON: in ‘Metallurgy of vacuum-degassed steel products’, (ed. R. Pradhan), 143-160; 1990, Warrendale, PA, TMS.
   Google Scholar
• T. OBARA, S. SATOH, M. NISHIDA, and T. IRIE: Scand. J. Metall., 1984, 13, 201–213.
   Google Scholar
• R. H. GOODENOW and J. F. HELD: Metall. Trans., 1970, 1, 2507–2515.
   Web of Science ®Google Scholar
• S. SATOH, T. OBARA, M. NISHIDA, and T. HUE: in ‘Technology of continuously annealed cold-rolled sheet’, (ed. R. Pradhan), 151-166; 1985, Warrendale, PA, TMS-AIME.
   Google Scholar
• S. R. GOODMAN, P. R. MOULD, and J. C. SIPLE: in ‘Technology of continuously annealed cold-rolled sheet steel’, (ed. R. Pardhan), 167-183; 1985, Warrendale, PA, TMS-AIME.
   Google Scholar
• R. E. HOOK, A. J. HECKLER, and J. A. ELIAS: Metall. Trans. A, 1975, 6A, 1683–1692.
   Web of Science ®Google Scholar
• W. B. HUTCHINSON: Int. Met. Rev., 1984, 29, 25–42.
   Google Scholar
• C. DARMANN and B. ENGL: Proc. 7th Riso Int. Symp. on Metallurgy and Metal Science: ‘Annealing processes — recovery recrystallization and grain growth’, (ed. N. Hansen, et al), Roskilde, Denmark, September 1986, Riso National Labora-tory, 279–284.
   Google Scholar
• G. KRAUSS, D. O. WILSHYNSKY, and D. K. MATLOCK: Proc. Int. Symp. on Interstitial Free Steel Sheet: ‘Processing, fabrication and properties’, (ed. L. E. Collins and D. L. Baragar), Ottawa, ON, Canada, August 1991, Metallurgical Society of CIM, 1–14.
   Google Scholar
• I. GUPTA and D. BHATTACHARYA: Proc. Int. Conf. on ‘Metallurgy of vacuum-degassed steel products’, (ed. R. Pradhan), 43-72; 1990, Warrendale, PA, TMS.
   Google Scholar
• H. TANAKA, Y. OGURA, K. YOSHOIKA, T. HIROSE, H. YARNADA, and M. SAKO: Nippon Kokan Tech. Rep., 1987, (48), 21–28.
   Google Scholar
• T. NAKAMURA and K. ESAKA: Proc. Int. Conf. on ‘Physical metallurgy of thermomechanical processing of steels and other metals’, THERMEC-88, Tokyo, Japan, June 1988, Iron and Steel Institute of Japan, 644–651.
   Google Scholar
• T. SENUMA and H. YADA: Proc. Int. Conf. on ‘Physical metallurgy of thermomechanical processing of steels and other metals’, THERMEC-88, Tokyo, Japan, June 1988, Iron and Steel Institute of Japan, 636–643.
   Google Scholar
• S. HASHIMOTO, T. YAKUSHIJI, T. KASHIMA, and K. HOSOMI: Proc. Int. Conf. on ‘Physical metallurgy of thermomechanical processing of steels and other metals’, THERMEC-88, Tokyo, Japan, June 1988, Iron and Steel Institute of Japan, 652–659.
   Google Scholar
• T. SENUMA, H. SAITO, K. USHIODA, N. YOSHINAGA, and H. YADA: J. Jpn Inst. Met., 1990, 54, 403.
   Web of Science ®Google Scholar
• T. SENUMA and K. KAWASAKI: ISIJ Int., 1994, 34, 51–60.
   Web of Science ®Google Scholar
• G. H. AKBARI, C. M. SELLARS, and J. A. WHITEMAN, Acta Mater., 1997, 45, 5047–5058.
   Web of Science ®Google Scholar
• D. DULY, G. J. BAXTER, H. R. SHERCLIFF, J. A. WHITEMAN, C. M. SELLARS, and M. F. ASHBY: Acta Mater., 1996, 44, 2947–2962.
   Web of Science ®Google Scholar
• H. KOBAYASHI: ISIJ Int., 1992, 32, 873–881.
   Web of Science ®Google Scholar
• H. J. MCQUEEN, W. A. WONG, and J. J. JONAS: Can. J. Phys., 1967, 45, 1225–1235.
   Web of Science ®Google Scholar
• S. F. EXELL and D. H. WARRINGTON: Philos. Mag., 1972, 26, 1121–1136.
   Web of Science ®Google Scholar
• A. J. HARTLEY: PhD thesis, University of Sheffield, UK, 1972.
   Google Scholar
• H. J. MCQUEEN and J. J. JONAS: in ‘Treatise on materials science and technology’, Vol. 6, ‘Deformation of metals’, 393-493; 1975, New York, Academic Press.
   Google Scholar
• J. J. JONAS, C. M. SELLARS, and W. J. MCG. TEGART: Metall. Rev., 1969,14, 1–24.
   Google Scholar
• A. S. KEH and S. C. WEISSMANN: in ‘Electron microscopy and strength of crystals’, (ed. G. Thomas and J. Washburn), 231; 1963, New York, Interscience.
   Google Scholar
• A. BARDAL, I. LINDSETH, H. E. VATNE, and E. NES: Proc. 16th Riso Int. Symp. on Materials Science: `Microstructural and crystallographic aspects of recrystallization', Roskilde, Denmark, September 1995, Riso National Laboratory, 261–266.
   Google Scholar
• H. Hu, B. B. RATH, and R. A. VANDERMEER: in `Recrystallization 90', (ed. T. Chandra), 3-16; 1990, Warrendale, PA, TMS.
   Google Scholar
• C. M. SELLARS and Q. ZHU: in ‘Hot deformation of aluminium alloys II’, (ed. T. R. Bieler et al.), 185-197; 1988, Warrendale, PA, TMS.
   Google Scholar
• F. R. CASTRO-FERNANDEZ and C. M. SELLARS: Philos. Mag. A, 1989, A60, 487–506.
   Google Scholar
• G. J. BAXTER, T. FURU, Q. ZHU, J. A. WHITEMAN, and C. M. SELLARS: Acta Mater., 1999,47, 2367–2376.
   Web of Science ®Google Scholar