References
- R. A. SCHEPERY: J. Compos. Mater., 1968, 2, 390–404.
- N. MATSUDA and K. MATSUURA: Mater. Trans., JIM, 1997, 38, 205–214.
- H. S. KIM, J. A. YONG, R. D. RAWLINGS, and P. S. ROGERS: Mater. Sci. Technol., 1991, 7, 155–157.
- D. H. ALLEN, R. H. JONES, and J. G. BOYD: J. Mech. Phys. Solids, 1994, 42, 505–529.
- D. L. KRAABEL, B. P. SANDERS, and S. MALL: Compos. Sci. Technol., 1997, 57, 99–117.
- T. NICHOLAS: J. Eng. Mater. Technol. (Trans. ASME), 1995, 117, 440–447.
- N. OHNO, T. FUJITA, T. MIYAKE, H. NAKATANI, and M. IMATA: Mater. Sci. Res. Int., 1996, 2, 199–205.
- C. H. WEBER, X. CHEN, S. J. CONNELL, and F. W. ZOK: Acta Metall. Mater., 1994, 42, 3443–3450.
- S. OCHIAI and M. Ham: Mater. Trans. JIM, 1997, 338, 215–219.
- H. J. CHUN and I. M. DANIEL: J. Eng. Mater. Technol. (Trans. ASME), 1996, 118, 310–316.
- M. LINEKAMP and H. E. EXNER: Z. Metallkd., 1996, 87, 365–379.
- J. ECHAABI, F. TROCHU, and R. GAUVIN: Polym. Compos., 1996, 17, 786–798.
- M. W. HYER: ‘Stress analysis of fiber-reinforced composite materials’, 120–124; 1998, New York, McGraw-Hill.
- S. W. TSAI and H. T. HAHN: ‘Introduction to composite materials’, Chap. 9, 377-431; 1980, Lancaster, PA, Technomic.
- C. C. CHAMIS: J. Compos. Technol. Res., 1989, 11, 3–14.
- D. F. ADAMS: ‘Mechanics of composite materials’, (ed. G. P. Sendeckyj), 169-208; 1974, New York, Academic Press.
- J. R. BROCKENBROUGH, S. SURESH, and H. A. WIENECKE: Acta Metall. Mater., 1991, 39, 735–752.
- J. R. BROCKENBROUGH and S. SURESH: Ser. Metall. Mater., 1990, 24, 325–330.
- R. M. CHRISTENSEN: Int. J. Solids Struct., 1997, 34, 529–543.
- M. J. PINDERA and C. T. HERAKOVICH: ‘An endochronic theory for transversely isotropic fibrous composites’, Report VPI—E-81-27. Virginia Polytechnic Institute and State University, Blacksburg, VA, USA, 1981.
- J. ABOUDI: Compos. Sci. Technol., 1988, 33, 79–96.
- ASM Handbook, 10th edn, Vol. 6; 1993, Materials Park, OH, ASM International.
- R. HILL: J. Mech. Phys. Solids, 1964, 12, (12), 199–212.
- R. L. McCULLOUGH: in ‘Delaware composites design encyclo-pedia’, Vol. 2, `Micromechanical materials modeling', (ed. J. M. Whitney and R. L. McCullough); 1990, Lancaster, PA, Technomic.