Advanced search
Publication Cover
Materials Science and Technology Volume 19, 2003 - Issue 9: Polymer morphology and processing
Journal homepage
71
Views
18
CrossRef citations to date
0
Altmetric
Articles

Thermomechanical processing route to induce ultrafine grain structure by continuous recrystallisation in aluminium and its alloys

H. Jin
&
S. Saimoto
Pages 1197-1206 | Published online: 19 Jul 2013

References

  • F. J. HUMPHREYS and M. HATHERLY: `Recrystallisation and related annealing phenomena'; 1995, Oxford, Pergamon Press.
  • E. HORNBOGEN and U. KOSTER: `Recrystallisation of metallic materials', 159; 1978, Berlin, Springer Verlag.
  • E. HORNBOGEN: Metall. Trans. A, 1979, 10A, 947–972.
  • H. J. MCQUEEN and J. J. JONAS: ‘Treatise on materials science and technology’, Vol 6; 1975, New York, Academic Press.
  • E. is: Mater. Sci., 1978, 13, 2052–2055.
  • E. is: Met. Sci., 1979, 13, 211–215.
  • S. J. HALES, T. R. MCNELLEY and H. J. MCQUEEN. Metall. Trans A, 1991, 22A, 1037–1047.
  • E. is: in `Superplasticite', (ed. B. Baudelet and M. Suery), Chap. 7; 1985, Paris, Centre National de la Recherche Scientifique.
  • D. J. JENSEN, N. HANSEN and F. J. HUMPHREYS: Acta. Metall., 1985, 33, 2155–2162.
  • E. NES and W. B. HUTCHINSON: ‘Proc. 10th Risei Int. Symp’, (ed. Bilde-Sorensen et al), 233-238; 1989, Riser, Riser National Laboratory.
  • T. FURU, K. MARTHINSEN and E. NES: Proc. `Recrystallisation ‘92’, San Sebastian, Spain, August—September 1992, Mater. Sci. Forum, 1993, 113-115, 41–54.
  • R. D. DOHERTY: Met. Sci., 1974, 8, 132–142.
  • A. OSCARSSON, H-E. EKSTROM and B. HUTCHINSON: Mater. Sci. Forum, 1993, 113-115, 177–182.
  • H. J. MCQUEEN, O. KNUSTAD, N. RYUM and J. K. SOLBERG: SCr. Metall., 1985, 19, 73–78.
  • J. K. SOLBERG, H. J. MCQUEEN, N. RYUM and E. NES: Philos. Mag. A, 1989, 60A, 447–471.
  • H. J. MCQUEEN, J. K. SOLBERG, N. RYUM and E. NES: Philos. Mag. A, 1989, 60A, 473–485.
  • R. K. DAVIES, V. RANDLE and G. J. MARSHALL: Acta Mater., 1998, 46, 6021–6032.
  • Y. IWAHASHI, Z. HORITA, M. NEMOTO and T. G. LANGDON: Acta Mater., 1998, 46, 3317–3331.
  • V. V. STOLYAROV, Y. T. ZHU, T. C. LOWE, R. K. ISLAMGALIEV and R. Z. VALIEV: Nanostruct. Mater, 1999, 11, 947–954.
  • Y. SAITO, H. UTSUNOMIYA, N. TSUJI and T. SAKAI: Acta Mater, 1999, 47, 579–583.
  • S. SAIMOTO, J. LI, G. LANGELAAN, B. J. DIAK and J. SHIMIZU: Textures Microstruct., 1996, 26-27, 245–250.
  • H. JIN, J. LI and S. SAIMOTO: Proc. 6th Int. Conf. on ‘Aluminium alloys’, (ed. T. Sato et al), Vol. 2, 1197-1202; 1998, Japan Institute of Light Metals.
  • J. LI and S. SAIMOTO: Mater. Sci. Eng. A, 1997, 234A-236A, 1011–1014.
  • R. G. KAMAT, J. NG-YELIM and S. SAIMOTO: Z. Metallkd., 1995,86, 49–53.
  • G. RUMIVIEL, T. ZUMKLEY, G. ERDELYI, K. FREITAG, G.M. HOOD and H. MEURER: Defect Diffusion Forum, 1993, 95-98, 715 — 722.
  • B. J. DIAK, K. R. UPADHYAYA and S. SAIMOTO: Frog. Mater. Sci., 1998, 43, 223–363.
  • H. LEGACE and S. SAIMOTO: in ‘Annealing process-recovery, recrystallisation and grain growth’, (ed. H. Hansen et al), 415-420; 1986, Riser, Riser National Laboratory.
  • S. SAIMOTO, H. JIN and L. DELANNAY: in `Thennomechanical processing of steel', (ed. S. Yue and E. Essadiqi), 279–293; 2000, Ottawa, CEVIM.
  • H. JIN and S. SAIMOTO: Scr. Metall., 2002, 46, 275–279.
  • A. GHOLINIA, F. J. HUMPHREYS and P. B. PRANGNELL: Mater. Sci. TechnoL, 2000, 16, 1251–1255.
  • G. LANGELAAN and S. SAIMOTO: Rev. Sci. Inst., 1999, 70, 3413–3417.
  • F. R. N. NABARRO: Acta Metall., 1989, 37, 1521–1546.
  • F. J. HUMPHREYS and J. W. MARTIN: Philos. Mag., 1967, 16, 927–957.
  • F. J. HUMPHREYS and J. W. MARTIN: Philos. Mag., 1968, 17, 365 — 380.
  • s. SAIMOTO and AL S. DUESBERY : Acta Metall., 1984, 32, 147–155.
  • N. HANSEN and X. HUANG: Acta Mater, 1998, 46, 1827-1836.
  • D. A. HUGHES: Acta Metall. Mater., 1993, 41, 1421–1430.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.