References
- J. CHARLES: Proc. 4th Int. Conf. on ‘Duplex stainless steel’, Glasgow, Scotland, November 1994, The Welding Institute, Paper Kl.
- S. K. SRIVASTAVA: Proc. Conf. on ‘Duplex stainless steel’, 1983, ASM, Metals Park, Ohio, USA, 8201–8214.
- A. PINOL, O. IRIGOIEN, A. IZA, I. GUTIERREZ and J. J. URCOLA: 16th Riso International Symp., `Microstructural and crystallo-graphic aspects of recrystallisation', (ed. N. Hansen et al), 497-502; 1995, Roskilde, Denmark, Riso National Laboratory.
- F. E. AL-JOUNI and C. M. SELLARS: 4th Riso International Symp., ‘Deformation of multi-phase and particle containing materials’, (ed. J. B. Bilde-Sorensen et al), 131-137; 1983, Roskilde, Denmark, Riso National Laboratory.
- A. PAUL, J. L. MARTOS and R. SANCHEZ: ‘Innovation stainless steel’, Florence, Italy, October 1993, 3.297-3.302; 1993, Milan, AIM (Italy).
- T. L. F. MOLLER: PhD thesis, University of Sheffield, UK, 1967.
- F. E. AL JOUNI and C. M. SELLARS: Int. Conf On ‘Thermo-mechanical processing: mechanics, microstructure & control’, Sheffield, UK, June 2002, (ed. E. J. Palmiere et al), 225-232; 2002, Chesterfield, BBR Solutions Ltd.
- D. HARDWICK and W. J. MCG.TEGART: Rev. Metall, 1961, 58, 869.
- D. R. BARRACLOUGH, H. J. WHITTAKER, K. D. NAIR and C. M. SELLARS: J. Test. Eval., 1973, 1, 220–226.
- D. R. BARRACLOUGLE PhD thesis, University of Sheffield, 1974.
- R. A. N. M. BARBOSA and C. M. SELLARS: Mater. Forum, 113-115, 461–466.
- A. A. VIEIRA, D. B. SANTOS and R. A. N. M. BARBOSA: Recrystallisation 1990, Proc. Int. Conf. on `Recrystallisation in metallic materials', (ed T. Chandra), 351-356; 1990, Warrendale, PA, TMS.
- C. M. SELLARS: Proc. Int. Conf. on ‘Hot working and forming processes’, (ed. C. M. Sellars and G. J. Davies), 3-15; 1980, London, The Metals Society.
- D. J. TOWLE and T. GLADMAN: Met. Sci., 1979, 13, 246–256.
- G. T. CAMPBELL, J. R. ERNEST, P. ABRAHAMSON and J. G. NICHOLAS: Metall. Trans, 1974, 5, 1875–1881.
- D. R. BARRACLOUGH and C. M. SELLARS: Met. Sci., 1979, 13, 257–267.
- T. TAKESHITA, M. ABE and C. M. SELLARS: CUPP. Adv. Mater. Process, 1994,7, 788.
- G. GLOVER and C. AL SELLARS: Met. Trans, 1972,3, 2271–2280.
- J. P. SAIL and C. M. SELLARS: Proc. Int. Conf. on ‘Hot working and forming processes’, (ed. C. M. Sellars and G. J. Davies), 62; 1980, London, Metals Society.
- R. WUSATOWSKI: J. Iron Steel Inst., 1966, 204, 727–736.
- L. P. KARJALAINEN, J. S. PERTHULA and J. A. KOSKINIEME 2nd Int. Conf. on ‘Modelling of metal rolling processes’, 324-333; 1996, London, The Institute of Materials.
- v. UEMATSU and K. YAMAZAKI: ‘Stainless steel '87’, 386–393; 1988, London, The Institute of Metals.
- W. REICK, M. POHL. and A. F. PADIHA: Proc. 49th Cong. On the ‘Technology of metals and materials’, 1995, Vol. 8, ‘New types of steel and their applications’, Sao Paulo, Brazil, October 1994, Associacao Brasileira de Metais, 327–336.
- T. CHANDRA, D. BENDEICH and D. P. DUNNE: Proc. 6th Int. Conf. on ‘Strength of metals and alloys’, Vol. 1, 505-510; 1983, Oxford, Pergamon Press.
- L. M. CLAREBROUGH: Aust. J. ScL Res., 1950, 3, 72.
- T. CHANDRA, D. P. DUNNE and P. CAMPBELL: Proc. 7th Int. Conf. on ‘Strength of metals and alloys’, Vol. 2, 947-952; 1985, Oxford, Pergamon Press.
- A. PINOL-JUEZ, A. IZA-MENDIA, I. GUTIERREZ and J. J. URCOLA: Key Eng. Mater., 1997, 127–131, 1025-1032.