References
- S. KALPAKJIAN: ‘Manufacturing processes for engineering materials’, 122–144; 1997, CA, Addison Wesley Longman.
- B. J. HOGAN: Manuf Eng., 1998, 120, 42–49.
- D. J. ANTOS and E. G. NISBETT: ‘Steel forgings’, Vol. 2 (ed. E. G. Nisbett and A. S. Melilli), 129-146; USA, ASTM Committee Al.
- A. B. LOPES, E. F. RAUCH and J. J. GRACIO: Acta Mater., 1999,47, (3), 859–866.
- Y. S. JANG, D. C. KO and B. M. KIM: J. Mater. Process. Technol, 2000, 101, 85–94.
- S. HE, A. V. BAEL, S. Y. LI, P. V. HOUTTE, F. MEI and A. SARBAN: Mater. Sci. Eng. A, 2003, A346, 101–107.
- S. KATAYAMA and M. TODA: J. Mater. Process. Technol, 1996, 62, 358–362.
- J. YASUHIRO and A. AKIRA: Int. J. Mach. Tools Manuf, 2001,41, 347–360.
- W. S. LEE, G. L. XIEA and C. F. LIN: Mater. Sci. Eng. A, 1998, A257, 256–267.
- P. LUDWIK: 'Elemente der Technologischen Mechanik', 32; 1909, Berlin, Springer-Verlag OHG.
- J. D. CAMPBELL and W. G. FERGUSON: Philos. Mag., 1970, 21, 63–82.
- H. CONARD and S. FREDERICK: Acta Metall., 1962, 10, 1013–1020.
- S. NEMAT-NASSER and Y. L. LI: Acta Mater., 1998, 46, 565–577.
- H. CONRAD: J. Met., 1964, July, 582–588.
- G. SCHOECK and B. WIELKE: Scr. Metall., 1976, 10, 771–774.
- A. CUMIBERTI and A. PICASSO: Phys. Status Solidi, 2001, 183, 373–379.
- A. GILAT and x. wu: Int. J. Plast., 1997, 13, 611–632.
- K. K. M. PANDEY, O. PRAKASH and B. BHATTACHARYA: Mater. Lett., 2003, 57, 4319–4322.
- J. HARDING: Proc. 4th Int. Conf. on ‘Mechanical properties of materials at high rates of strain’, Oxford, March 1989, The Institute of Physics, 189–203.
- F. J. ZERILLI and R. D. ARMSTRONG: J. Appl. Phys., 1987, 61, 1816–1825.
- M. A. MEYERS, G. SUBHASH, B. K. KAD and L. PRASAD: Mech. Mater., 1994, 17, 175–193.
- W. S. LEE and C. F. LIN: Metall Mater. Trans. A Phys. Metall Mater. Sci., 2002, 33, 2801–2810.
- A. NIECHAJOWICZ and A. TOBOTA: J. Mater. Process. Technol, 2000, 106, 123–130.
- A. INOUE, T. OGURA and T. MASUMOTO: Trans. JIM, 1976, 17, 149–157.
- Q. LI, Y. B. XU, Z. H. LAI, L. T. SHEN and Y. L. BAI: Mater. Sci. Eng., 2000, A276, 250–256.
- Y. B. XU, W. L. ZHONG, Y. J. CHEN, L. T. SHEN, Q. LIU, Y. L. BAI and M. A. MEYERS: Mater. Sci. Eng., 2001, A299, 287–295.