- M. GUTTMANN: Proc. Conf. Ecasia 97, Goteborg, Sweden, 16-20 June 1997, 50-57; 1997, New York, NY, Wiley.
- W. MASCHEK, S. P. HAYES, and A. R. MARDER: `Galvatech ‘95: the use and manufacture of zinc and zinc alloy coated sheet steel products into the 21st century’, Chicago, IL, USA, 17-21 Sept. 1995, 309-318; 1995, Warrendale, PA, ISS.
- M. GUTTMANN: ‘Transformations de phases diffusionnelles dans le systeme Fe—Zn—Al en galvanisation’ in ‘Revatements et traitements de surface: fonctionnalités, durabilité, procédés’, 551-556; Lausanne, Presses polytechniques et universitaires romandes.
- M. GUTTMANN, Y. LEPRETRE, A. AUBRY, M. J. ROC, T MOREAU, P. DRILLET, J. M. MATAIGNE, and H. BAUDIN: `Galvatech ‘95: the use and manufacture of zinc and zinc alloy coated sheet steel products into the 21st century’, Chicago, IL, USA, 17-21 Sept. 1995, 295-307; 1995, Warrendale, PA, ISS.
- C. ALLELY, P. DRILLET, J. C. CHARBONNIER, M. GUTTMANN, A. TAKAHASHI, N. NAKAZAWA, and Y. MIYOSHI: `Galvatech ‘95: the use and manufacture of zinc and zinc alloy coated sheet steel products into the 21st century’, Chicago, IL, USA, 17-21 Sept. 1995, 371-375; 1995, Warrendale, PA, ISS.
- A. TAKAHASHI, N. NAKAZAWA, Y. MIYOSHI, C. ALLELY, J. C. CHARBONNIER, P. DRILLET, and M. GUTTMANN: `Galvatech ‘95: the use and manufacture of zinc and zinc alloy coated sheet steel products into the 21st century’, Chicago, IL, USA, 17-21 Sept. 1995, 377-381; 1995, Warrendale, PA, ISS.
- H. SAKA, T. KATO, M. H. HONG, K. SASAKI, K. KURODA, and T. KAMINO: `Galvatech ‘95: the use and manufacture of zinc and zinc alloy coated sheet steel products into the 21st century’, Chicago, IL, USA, 17-21 Sept. 1995, 809-813; 1995, Warrendale, PA, ISS.
- K. PARK: in ‘Specimen preparation for transmission electron microscopy of materials II’, (ed. R. Anderson), MRS Symp. Proc., Vol. 199, 271; 1990, Pittsburgh, PA, Materials Research Society.
- M. H. HONG and H. SAKA: SCR. Mater., 1997, 36, (12), 1423–1429.
- Y. ADACHI, T. NAKAMRI, and K. KAMEI: `Galvatech ‘95: the use and manufacture of zinc and zinc alloy coated sheet steel products into the 21st century’, Chicago, IL, USA, 17-21 Sept. 1995, 471-475; 1995, Warrendale, PA, ISS.
- P. TOUSSAINT, L. SEGERS, R. WINAND, and M. DUBOIS: `Galvatech ‘98’, Tokyo, Japan, 20-23 Sept. 1998, The Iron and Steel Society of Japan, 141-146.
- L. BORDIGNON, J. F. WILLEM, J. P. SERVAIS, and M. LAMBERIGTS: `Galvatech ‘98’, Tokyo, Japan, 20-23 Sept. 1998, The Iron and Steel Society of Japan, 260-265.
- Y. MURIMOTO, M. KUROSAKI, M. KIMURA, and M. IMAFUKU: `Galvatech ‘98’, Tokyo, Japan, 20-23 Sept. 1998, The Iron and Steel Society of Japan, 197-201.
- T. KATO, K. NUNOME, Y. MORIMOTO, K. NISHIMURA, N. KATO, and H. SAKA: `Galvatech ‘98’, Tokyo, Japan, 20-23 Sept. 1998, The Iron and Steel Society of Japan, 803-806.
- S. GOMI, C. KATO, T. FUJIMURA, and K. MOCHIZUKI: in ‘Zinc based steel coating systems: production and performance’, (ed. F. E. Goodwin), 147-156; 1998, Warrendale, PA, TMS.
- R. MEILLAND and G. BOUTIN: Mater. Tech., 2000, (3-4), 75-81.
- C. WAGNER: Z. Elektrochem., 1959, 63, 772.
- R. A. RAPP: Corrosion, 1965, 21, 382–401.
- H. SCHENK, E. SCHMIDTMAN, and H. MULLER: Arch. Eisenhiittenwes., 1960, 31, (2), 121–129.
- J. TAKADA, K. KASHIWAG, and M. ADACHI: Trans. Metall. Soc., 1967, 239, 426–431.
- P. NETTER, F. GALDON, P. CHEMELLE, D. LOISON, and J. C. CHARBONNIER: Rev. Métall., Cah. Inf. Tech., 1987, 5, 394–408.
- B. CHATELAIN and V. LEROY: Rev. Metall., Cah. Inf. Tech., 1988, 4, 331–340.
- D. DEPARIS and H. JACOBS: in ‘Physical chemistry of the solid state: application to metals and their compounds’, (ed. P. Lacombe), 361-372; 1984, Amsterdam, Elsevier.
- M. L. WAYMAN and J. T. GRAY: Acta Metall., 1974, 22, (3), 349–355.
- R. M. HUDSON, H. E. BIBER, E. J. JOLES, and C. J. WARNING: Metall. Trans. A, 1977, 8A, (10), 1713–1719.
- D. P. WHITTLE, F. GESMUNDO, B. D. BASTOW, and G. C. WOODS: Ox. Met., 1981, 16, (1-2), 159–174.
- J. S. KIRKALDY: Can. Metall. Q., 1969, 8, (1) 35–38.
- S. W. GUAN, H. C. Yl, and W W. SMELTZER: Ox. Met., 1994, 41, (5-6), 366–387.
- V. LANTERI, D. HUIN, P. DRILLET, D. BOULEAU, P. HENRY, and H. GAYE: Proc. 3rd Conf. on ‘Microscopy of oxidation’, Cambridge, UK, 16-18 Sept. 1996, The Institute of Materials, 535-550.
- D. HUIN, V. LANTERI, D. LOISON, P. AUTESSERRE, and H. GAYE: Proc. 3rd Conf. on ‘Microscopy of oxidation’, Cambridge, UK, 16-18 Sept. 1996, The Institute of Materials, 573-586.
- P. TOUSSAINT, L. SEGERS, R. WINAND, and M. DUBOIS: TMS Annual Meeting, San Antonio, TX, 16-19 February 1998, TMS, 27-37.
- P. TOUSSAINT, L. SEGERS, R. WINAND, and M. DUBOIS: Rev. Metall., Feb. 1997, 259–265.
- K. OGLE and S. WEBER: J. Electrochem. Soc., 2000, 147, 1770.
- K. OGLE, F. KOP, S. WEBER, and G. VASQUEZ: The Electrochemical Society’s 193rd Meeting, 3-8 May 1998, San Diego, CA, Vol. 98, (1), 106.
- K. OGLE, C. GABRIELLI, M. KEDDAM, F. MINOUFLET, and H. PERROT: J. Electrochem. Soc., 2000, 141, 2655.
- K. H. STELLENBERGER, M. WOLPERS, T. FILI, C. REINARTZ, T. PAUL, and M. STRATMANN: Faraday Discuss., 1997, 107, 307–322.
- M. GUTTMANN: Mater. Sci. Forum, 1994, 155-156, 527-554.
- C. S. LIN and M. MESHII: `Galvatech ‘95: the use and manufacture of zinc and zinc alloy coated sheet steel products into the 21st century’, Chicago, IL, USA, 17-21 Sept. 1995, 327-334; 1995, Warrendale, PA, ISS.
- C. S. LIN and M. MESHII: `Galvatech ‘95: the use and manufacture of zinc and zinc alloy coated sheet steel products into the 21st century’, Chicago, IL, USA, 17-21 Sept. 1995, 335-342; 1995, Warrendale, PA, ISS.
- T. MATSUMOTO, S. HAMANAKA, T. YAMADA, and T. TANAKA: ‘Effect of reduction heating conditions on wetting character-istics with molten zinc of if steels containing Mn and P’, Nisshin Technical Report, No. 78, 1998, 1–8.
- E. BARIL, G. L’ESPERANCE, and E. BOUTIN: `Galvatech ‘98’, Tokyo, Japan, 20-23 Sept. 1998, The Iron and Steel Society of Japan, 168-173.
- Y. UCHID, A. A. KOMATSU, A. ANDOH, and K. YAMAKAWA: `Galvatech ‘98’, Tokyo, Japan, 20-23 Sept. 1998, The Iron and Steel Society of Japan, 121-126.
- A. KOMATSU, Y. UCHID, A. A. ANDOH, and K. YAMAKAWA: `Galvatech ‘98’, Tokyo, Japan, 20-23 Sept. 1998, The Iron and Steel Society of Japan, 127-132.
- Y. LEPRETRE and J. M. MATAIGNE: `Galvatech ‘98’, Tokyo, Japan, 20-23 Sept. 1998, The Iron and Steel Society of Japan, 133-140.
- E. McDEWITT, Y. MORIMOTO, and M. MESHII: ISIJ Int., 1997, 37, (8), 776–782.
- I. HERTVELDT, L. VANDENBERGHE, and B. D. COOMAN: `Galvatech ‘98’, Tokyo, Japan, 20-23 Sept. 1998, The Iron and Steel Society of Japan, 190-196.
- Y. MORIMOTO, E. McDEWITT, and M. MESHII: ISIJ Int., 1997, 37, (9), 906–913.
- V. FURDANOWICZ and C. R. SHASTRY: Metall. Mater. Trans. A, 1999, 33A, 3031–3044.
- S. E. PRICE, V. RANDLE, and M. PICHILINGI: Ironmaking Steelmaking, 1999, 26, (5), 378–386.
- Y. LEPRETRE, J. M. MATAIGNE, M. GUTTMANN, and J. PHILIBERT: TMS Annual Meeting, San Antonio, TX, 16-19 February 1998, TMS, 95-106.
- J. M. MATAIGNE, P. DRILLET, J. M. PRAT, D. MAREUSE, P. TERRAUX, and M. GUTTMANN: `Galvatech ‘95: the use and manufacture of zinc and zinc alloy coated sheet steel products into the 21st century’, Chicago, IL, USA, 17-21 Sept. 1995, 589-597; 1995, Warrendale, PA, ISS.
- E. T. McDEVITT and M. MESHIE TMS Annual Meeting, 16-19 February 1998, San Antonio, TX, TMS, 127-136.
- A. MIYASAKA and K. I. MATSUMURA: `Galvatech ‘98’, Tokyo, Japan, 20-23 Sept. 1998, The Iron and Steel Society of Japan, 185-189.
- A. T. ALPAS and J. INAGAKI: `Galvatech ‘98’, Tokyo, Japan, 20-23 Sept. 1998, The Iron and Steel Society of Japan, 174-179.
- M. MESHIE `Galvatech ‘98’, Tokyo, Japan, 20-23 Sept. 1998, The Iron and Steel Society of Japan, 791-796.
- E. T. McDEVITT, Y. MORIMOTO, and M. MESHIE `Galvatech ‘98’, Tokyo, Japan, 20-23 Sept. 1998, The Iron and Steel Society of Japan, 153-160.
- E. T. McDEVITT and M. MESHIE `Galvatech ‘98’, Tokyo, Japan, 20-23 Sept. 1998, The Iron and Steel Society of Japan, 161-167.
- R. NICOLLE and H. LAVELAINE: ‘Modelisation des réacteurs de traitement de surfaces’, in ‘Revatements et traitements de surface: fonctionnalités, durabilité, procédés’, 583-595; Lausanne, Presses polytechniques et universitaires romandes.
- C. ALLELY, P. BOCAGE, J. C. CATONNE, F. KOP, and R. NICOLLE: Rev. Metall., Cah. Inf. Tech., June 1999, 779–787.
- I. LINARES, J. B. GUILLOT, A. RIST, O. DOBELLE, Ph. PICARD, T. MOREAU, P. ABED, D. CUCHEVAL, and R. NICOLLE: `Galvatech ‘95: the use and manufacture of zinc and zinc alloy coated sheet steel products into the 21st century’, Chicago, IL, USA, 17-21 Sept. 1995, 657-661; 1995, Warrendale, PA, ISS.
- P. TOUSSAINT, P. VERNIN, B. SYMOENS, L. SEGERS, M. TOLLEY, R. WINAND, and M. DUBOIS: Ironmaking Steelmaking, 1996, 23, (4), 357–360.
- G. G. BRUMMIT, S. L. BOSTON, H. GUTTMANN, and S. BELISLE: Proc. Galvatech ‘92, Amsterdam, September 1992, 55-61; 1992, Dusseldorf, Stahleisen.
- M. GAGNE, H. GUTTMANN, J. LECUYER, G. G. BRUMMIT, G. L. ADAMS, and D. KLEIMER: Galvanizer’s Association Meeting, Niagara Falls, NY, October 1990.
- N. Y. TANG and M. DUBOIS: `Galvatech ‘98’, Tokyo, Japan, 20-23 Sept. 1998, The Iron and Steel Society of Japan, 76-84.
- K. OTSUKA, M. ARAI, and S. KASAI: `Galvatech ‘98’, Tokyo, Japan, 20-23 Sept. 1998, The Iron and Steel Society of Japan, 96-101.
- N. Y. TANG: `Galvatech ‘98’, Tokyo, Japan, 20-23 Sept. 1998, The Iron and Steel Society of Japan, 654-658.
- M. DUBOIS: `Galvatech ‘98’, Tokyo, Japan, 20-23 Sept. 1998, The Iron and Steel Society of Japan, 634-641.
- N. Y. TANG, G. R. ADAMS, and P. KOLISNYK: `Galvatech ‘95: the use and manufacture of zinc and zinc alloy coated sheet steel products into the 21st century’, Chicago, IL, USA, 17-21 Sept. 1995, 777-782; 1995, Warrendale, PA, ISS.
- M. GAGNE, H. GUTTMAN, J. LECUYER, G. G. BRUMMIT, G. L. ADAMS, and D. KLEIMER: Galvanizer’s Association Meeting, Niagara Falls, NY, October 1990.
- S. YAMAGUCHI, H. MAKING, A. SAKATOKU, and Y. IGUCHI: `Galvatech ‘95: the use and manufacture of zinc and zinc alloy coated sheet steel products into the 21st century’, Chicago, IL, USA, 17-21 Sept. 1995, 787-794; 1995, Warrendale, PA, ISS.
- M. DAUZAT, F. STOUVENOT, and T. MOREAU: Proc. Galvatech ‘92, Amsterdam, September 1992, 449-454; 1992, Dusseldorf, Stahleisen.
- N. Y. TANG: TMS Annual Meeting, San Antonio, TX, 16-19 February 1998, TMS.
- R. NICOLLE, J. M. STELLER, and M. WANIN: Rev. Métall., Cah. Inf. Tech., Jan. 2000, 61–71.
- J. KUROBE et al.: Curr. Adv. Mater. Process., 1996, 9, 1296.
- A. YAKAWA: ‘Investigation of restraining method from bottom dross flinging’, Curr. Adv. Mater. Process., 1996, 9, 1084–1087.
- M. GAGNE and F. AJERSCH: `Galvatech ‘95: the use and manufacture of zinc and zinc alloy coated sheet steel products into the 21st century’, Chicago, IL, USA, 17-21 Sept. 1995, 687-694; 1995, Warrendale, PA, ISS.
- A. PARE, C. BINET, and F. AJERSCH: `Galvatech ‘95: the use and manufacture of zinc and zinc alloy coated sheet steel products into the 21st century’, Chicago, IL, USA, 17-21 Sept. 1995, 695-706; 1995, Warrendale, PA, ISS.
- F. AJERSCH, C. BINET, F. E. GOODWIN, K. S. TURKE, and R S. KOLYNYSK: `Galvatech ‘98’, Tokyo, Japan, 20-23 Sept. 1998, The Iron and Steel Society of Japan, 642-647.
- C. BINET and F. AJERSCH: `Galvatech ‘98’, Tokyo, Japan, 20-23 Sept. 1998, The Iron and Steel Society of Japan, 648-653.
- M. GAGNE and M. GAUG: `Galvatech ‘98’, Tokyo, Japan, 20-23 Sept. 1998, The Iron and Steel Society of Japan, 90-95.
- K. KOBAYASHI and H. KAWAMUKAI: ‘Estimation of thickness in electroplating by numerical simulation’, Yamaha Corp. Report, Vol. 48, (9), 1997, 873-878.
- J. JOSSERAND, A. ALEMANY, E. CHAINET, S. A. MARTEMIANOV, B. NGUYEN, P. OZIL, P. PHAM, A. PILAUD, and E. M. ZINDINE: ‘Développements méthodologiques phénomeves fondamen-taux’, in ‘Rocents Progrés en genie des Procédés Congrés de Grenoble’, Vol. 17, No. 27, 81-86; 1993, Paris, Group Francais des Procédés, Lavoisier Techniques et Documents.
- S. GOLDBACH, F. LAPICQUE, W. MESSING, and T. DAENEN: Thysicochimie et thermodynamique des procédés’, in ‘Récents Progres en genie des Procédés Congres de Paris’, Vol. 17, No. 11, 55, 155-160; 1997, Paris, Group Francais des Procédés, Lavoisier Techniques et Documents.
- H. ROUSTAN, J. P. CAME, F. NICOLAS, and R PHAM: ‘Phénomenes de transfert’, in ‘Récents Progres en genie des Procédés Congres de Paris’, Vol. 17, No. 11, 53, 163-168; Paris, Group Francais des Procédés, Lavoisier Techniques et Documents.
- H. ROUSTAN, J. P. CAIRE, and F. NICOLAS: ‘Possibilités et avantages du logiciel Flux Expert pour la modélisation des réacteurs électrochimiques industriels’, Journées d’electrochi-mie 95, Strasbourg, France, 29 May-1 June, 1995 (in French).
- H. LAVELAINE and P. BOCAGE: ‘Study of zinc morphologies with hydrodynamic hull cell’, Interfinish 2000, Garmisch-Partenkirchen, Germany, 10-15 September 2000, International Society of Electrochemistry.
Surface Treatments and Coatings in the Steelmaking Industry – From Metallurgy to Processing
Reprints and Corporate Permissions
Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?
To request a reprint or corporate permissions for this article, please click on the relevant link below:
Academic Permissions
Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?
Obtain permissions instantly via Rightslink by clicking on the button below:
If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.
Related research
People also read lists articles that other readers of this article have read.
Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.
Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.