61
Views
44
CrossRef citations to date
0
Altmetric
Articles

Critical stress for delamination fracture in HSLA steels

Pages 459-472 | Published online: 29 Nov 2013

REFERENCES

  • W. B. MORRISON: Met. Technol., 1975, 2, 33.
  • E. MIYOSHI et al.: Prof. Conf. 'Crack propagation in pipelines', paper No. 5, Newcastle-upon-Tyne, 26–27 March 1974.
  • E. MIYOSFH et al.: Testu-to-Hagane (J. Iron Steel Inst. Jpn.), 1976, 62, 688.
  • W. A. MAXEY: Proc. Conf. 'Line pipe research', Houston, 20–22 November 1974.
  • American Iron and Steel Institute: Technical report of committee of large diameter line pipe producers, 1 September 1974.
  • T. COLEMAN. D. DULIEU, and A. GOUCH: 'The microstructure and design of alloys', 70. 1974: London (Metals Society).
  • A. MASSIP, F. HEISTERKAMP, and L. MEYER: Stahl Eisen., 1973, 93, 1051.
  • B. L. BRAMFITT and R. MARDER: 'Processing and properties of low-carbon steels', J. M. Gray ed., 221. 1973: New York (AIME).
  • R. SCHOFIELD, G. ROUNTREE, N. V. SARMA, and R. T. WEINER: Met. Technol., 1974, 1, 325.
  • D. S. DABKOSKI, P. J. KONKOL, and M. F. BALDY: Met. Eng. Q., 1976, 16, 22.
  • P. BROZZO and G. BUZZICHELLI: Scr. Metall., 1976, 10, 235.
  • W. B. MORRISON and B. MINTZ: Proc. ICSMA 4, E.N.S.M.I.M.-INPL, 1976, vol. 2, p. 498.
  • G. BALDI et al.: ibid., vol. 3, p. 1333.
  • W. B. MORRISON, B. MINTZ, and R. C. COCHRANE: 'Controlled processing of HSLA steels', Conf. preprint, paper No. 1, BSC, 1976.
  • D. QUINTO and J. N. CORDEA: Proc. 4th Conf. 'Mech. Behav. of Solids', 1976, p. 1258.
  • D. N. HAWKINS: Met. Technol., 1976, 4, 417.
  • G. R. SPEICH and D. S. DABKOSKI: 'The hot deformation of austenite', (ed. J. Ballance) p.557. 1977: New York (AIME).
  • J. D. EVENSEN, J. LEREIM, and J. D. EMBURY: Metalworking Res. Group, Int. Rep., McMaster University, May 1977.
  • H. HERO, J. EVENSON, and J. D. EMBURY: ibid., August 1974.
  • J. D. EMBURY and K. COOPER: Can. Metall. Q., 1975, 14, 69.
  • E. HORNBOGEN and K. D. BECKMAN: Arch. Eis., 1976, 47, 553.
  • P. BROZZO et al., E.E.C. Cony. No. 6210/48/401, Final Report CSM, March 1976.
  • J. D. G. GROOM and J. F. KNOTT: Met. Sci., 1975, 9, 390.
  • P. W. BRIDGMAN: 'Studies in large plastic flow and fracture'. 1952: New York (McGraw-Hill).
  • R. HILL: 'The mathematical theory of plasticity'. 1950: London (Oxford University Press).
  • G. BALDI and G. BUZZICHELLI: CSM Internal Report No. 2684, March 1977.
  • G. BALDI et al.: CSM Internal Report No. 2466, June 1976.
  • G. BUZZICHELLI and A. MASCANZONI: WM. Scl. Rev. Metall., 1976, 73, 335.
  • T. GLADMAN, D. DULIEU, and I. McIVOR: 'Microalloying '75' Conf. preprint, 1975, vol. I, p. 25.
  • J. F. KNOTT: 'Fracture '69', (ed. P. L. Pratt), p. 205. 1969: London (Chapman and Hall).
  • J. F. KNOTT: 'Fundamentals of fracture mechanics'. 1973: London (Butterworths).
  • G. M. ALEXANDER and T. J. KOMOLY: J. Mech. Phys. Solids, 1962, 10, 265.
  • T. R. WILSHAW and P. L. PRATT: ibid., 1966, 14, 7.
  • N. P. ALLEN, C. C. EARLY, and J. H. RENDALL: Proc. R. Soc., 1965, A285, 120.
  • J. A. HENDRICKSON, D. S. WOOD, and D. S. CLARK: Trans. ASM, 1958, 50, 656.
  • J. F. KNOTT: J. Iron Steel Inst., 1966, 204, 104.
  • J. F. KNOTT: J. Mech. Phys. Solids, 1967, 15, 97.
  • T. R. WILSHAW, C. A. RAU, and A. S. TETELMAN: Eng. Fracture Mech., 1968, 1, 191.
  • J. R. GRIFFITHS and D. R. J. OWEN: J. Mech. Phys. Solids, 1971, 19, 419.
  • D. F. J. EWING: ibid., 1968, 16, 205.
  • J. F. KNOTT: paper presented at 'Fracture '77' Conf., Waterloo, 19–24 June, 1977.
  • P. BROZZO. G. BUZZICHELLI, A. MASCANZONI, and M. MIRABILE: Met. Scl., 1977, 11, 123.
  • C. F. TIFFANY and J. N. MASTERS: ASTM STP 381, 1965, p. 249.
  • G. BALDI and G. BUZZICHELLI: unpublished work.
  • R. O. RITCHIE, L. C. E. GENIETS. and J. F. KNOTT: Ref. 6, p. 124.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.