References
- Murakami S., Kawai M. and Yamada Y.: ‘Creep after cyclic-plasticity under multiaxial conditions for type 316 stainless steel at elevated temperature’, J. Eng. Mat. Technol., 1990, 112–3, 346–352.
- Skelton R. P. and Horton C. A. R.: ‘The effect of thermal ageing and mechanical exposure on low cycle creep-fatigue strength of 316 steel at 625°C’, Mater. High Temp., 1999, 16, (2), 87–97.
- Yamauchi M., Chuman Y., Otani T. and Takahashi Y.: ‘Study on the effect of prior fatigue and creep-fatigue damage on the fatigue and creep characteristics of 316 FR stainless steel (1st report, The effect of prior fatigue damage on the creep and fatigue characteristics)’, Trans. Jpn. Soc. Mech. Eng., 2001, 67, (653), 60–65, [in Japanese].
- Joseph T. D., McLennon D., Spindler M. W., Truman C. E. and Smith D. J.: ‘The effect of prior cyclic loading variables on the creep behaviour of ex-service Type 316H stainless steel’, Mater. High Temp., 2013, 30, 156–160.
- Kitade S., Setoguchi K., Yamauchi M. and Igari T.: ‘Cyclic stress-strain behavior of modified 9Cr-1Mo steel under creep-fatigue interaction’, ASME, 1989, 172, 35–41, [Pressure Vessels and Piping Division (Publication) PVP].
- Takahashi Y., Dogan B. and Gandy D.: ‘Systematic evaluation of creep-fatigue life prediction methods for various alloys’, J. Press. Vessel Technol., 2013, 135, [paper No. 061204].
- American Society of Mechanical Engineers: ‘Boiler and pressure vessel code, section III’, Subsection NH; 2013.
- Japan Society of Mechanical Engineers: ‘Codes for nuclear power generation facilities –rules on design and construction for nuclear power plants- part II: fast reactors’, [JSME S NC2-2005]; 2005.
- AFCEN: ‘Design and construction rules for mechanical components of FBR nuclear Islands, RCC-MR, association francaise pour les regles de conception et de construction des materials des chaudiereselectronucleaires’, 2007.
- Takahashi Y., Shibamoto H. and Inoue K.: ‘Study on creep-fatigue life prediction methods for low-carbon nitrogen-controlled 316 stainless steel (316FR)’, Nucl. Eng. Des., 2008, 238, 322–335.
- Takahashi Y.: ‘Study on creep-fatigue evaluation procedures for high-chromium steels—Part I: Test results and life prediction based on measured stress relaxation’, Int. J. Press. Vessels Piping, 2008, 85, 406–422.