REFERENCES
- G. Çam, (J. Yeni, S. Erim, V. Ventzke, and M. Koçak: Sci. Technol. Weld. Joining, 1998, 3, (4), 177–189.
- G. Çam, M. Koçak, and J. F. Dos Santos: Weld. World, 1999, 43, (2), 13–26.
- J. F. Dos Santos, G. Çam, F. Torster, A. Insfran, S. Riekehr, V. Venztke, and M. Koçak: Weld. World, 2000, 44, (6), 42.
- G. Çam and M. Koçak: Int. Mater. Rev., 1998, 43, (1), 1–44.
- G. Çam, V. Ventzke, J. F. Dos Santos, M. Koçak, G. Jennequin, and P. Gonthier-Maurin: Sci. Technol. Weld. Joining, 1999, 4, (5), 317–323.
- G. Çam, V. Ventzke, J. F. Dos Santos, M. Koçak, G. Jennequin, P. Gonthier-Maurin, M. Penasa, and C. Rivezla: Prakt. Metallogr., 2000, 37, (2), 59–89.
- G. Çam, L. Heikinheimo, M. Siren, D. Dobi, and M. Koçak: Proc. Conf. ‘LÖT ’95’, DVS Bericht 166, 233–238; 1995, Düsseldorf, Germany, Deutscher Verlag für Schweißtechnik (DVS).
- G. Çam, L. Heikinheimo, M. Siren, D. Dobi, and M. Koçak: Proc. 4th Int. Conf. on ‘Trends in welding research’, Gatlinburg, TN, June 1995.
- B. J. Dalgleish, K. P. Trumble, and A. G. Evans: Acta Metall., 1989, 37, (7), 1923–1931.
- Z. Suo and J. W. Hutchinson: Mater. Sci. Eng., 1989, A107, 135–143.
- I. E. Reimanis, B. J. Dalgleish, M. Brahy, M. Rühle, and A. G. Evans: Acta Metall. Mater., 1990, 38, (12), 2645–2652.
- E. Tschegg, H. O. K. Kirchner, and M. Koçak: Acta Metall. Mater., 1990, 38, (3), 469–478.
- C. F. Shih, R. J. Asaro, and N. P. Odowd: Proc. Scr. Metall. Conf. on ‘Bonding, structural and mechanical properties’, 313–325; 1990, Elmsford, NY, Pergamon.
- I. E. Reimanis, B. J. Dalgleish, and A. G. Evans: Acta Metall. Mater., 1991, 39, (12), 3133–3141.
- C. F. Shih and L. Cheng: Proc. Joint FEFG/ICF Int. Conf. on ‘Fracture of engineering materials and structures’, Singapore, August 1991, 41–49.
- A. G. Varias, Z. Suo, and C. F. Shih: J. Mech. Phys. Solids, 1991, 39, (7), 963–986.
- N. P. O’dowd, C. F. Shih, and M. G. Stout: Int. J. Solids Struct., 1992, 29, (5), 571–589.
- A. G. Evans and B. J. Dalgleish: Acta Metall. Mater., 1992, 40, S295–S306.
- K.-H. Schwalbe and M. Koçak: ‘Mismatching of welds’, European Structural Integrity Society Vol. 17; 1994, London, Mechanical Engineering Publications.
- K.-H. Schwalbe and M. Koçak: ‘Mis-matching of interfaces and welds’; 1997, Geesthacht, Germany, GKSS Research Centre (ISBN 3–00–001951–00).
- Y.-J. Kim, G. Lin, A. Cornec, and K.-H. Schwalbe: IIW Doc. X–F–022–95, presented at 2nd intermediate meeting of IIW subcommission X-F on ‘Weld mis-match effect’, GKSS Research Centre, Geesthacht, Germany, 1995.
- Y.-J. Kim, G. Lin, A. Cornec, and K.-H. Schwalbe: IIW Doc. X–F–019–95, presented at 2nd intermediate meeting of IIW subcommission X-F on ‘Weld mis-match effect’, GKSS Research Centre, Geesthacht, Germany, 1995.
- G. Çam, L. Bunge, K.-H. Bohm, and M. Koçak: IIW Doc. X–F–076–98, Proc. 5th Int. Conf. on ‘Trends in welding research’, (ed. J. M. Vitek et al.), 669–676; 1999, Materials Park, OH, ASM International.
- G. Çam, L. Bunge, K.-H. Bohm, and M. Koçak: in ‘Brazing, high temperature brazing and diffusion welding’, DVS Bericht 192, 297–300; 1998, Düsseldorf, Germany, Deutscher Verlag für Schweißtechnik (DVS).
- T. W. Eager: Weld. J., 1995, 74, (6), 49–55.
- G. Çam, M. Koçak, D. Dobi, L. Heikinheimo, and M. Siren: Sci. Technol. Weld. Joining, 1997, 2, (3), 95–101.