References
- Y. Zhang and D. Taylor: Eng. Fract. Mech., 2000, 67, (1), 55–63.
- S. D. Sheppard and M. Strange: Fatig. Fract. Eng. Mater. Struct., 2007, 15, (6), 531–549.
- S. Daneshpour, A. H. Kokabi, A. A. Ekrami and A. K. Motarjemi: Sci. Technol. Weld. Join., 2007, 12, (8), 696–702.
- G. O. Hoglund and G. S. Bernard, Jr: Weld. Res. Suppl., 1938, 17, (11), 45–54.
- F. Keller and D. W. Smith: Weld. Res. Suppl., 1994, 23, (1), 23s–26s.
- R. A. Davis and R. C. McMaster: Weld. Res. Suppl., 1957, 36, (5), 25s–239s.
- P.H. Thornton, A. R. Krause and R. G. Davies: Weld. Res. Suppl., 1996, 75, (3), 101s–108s.
- R. Sakano, K. Murakami, K. Yamashita, T. Hyoe, M. Fujimoto, M. Inuzuka, Y. Nagao and H. Kashiki: Proc. 3rd Int. FSW Symp., Kobe, Japan, September 2001, TWI, CD-ROM.
- T. Y. Pan, A. Joaquin, D. E. Wilkosz, L. Reatherford, J. M. Nicholson, Z. Feng and M. L. Santells: Proc. 5th Int. FSW Sym., Metz, France, September 2004, TWI, CD-ROM.
- A. C. Addison and A. J. Robelou: Proc. 5th Int. FSW Sym., Metz, France, September 2004, TWI, CD-ROM.
- P. C. Lin, S. H. Lin, J. Pan, T. Pan, J. M. Nicholson and M.A. Garman: ‘Microstructures and failure mechanisms of spot friction welds in lap-shear specimens of aluminum 6111-T4 sheets’, Technical paper no. 2004-01-1330, Society of Automotive Engineering, Warrendale, PA, USA, 2004.
- H. Mizukoshi, K. Nanba and H. Sano: J. Jpn Soc. Light Met., 1991, 41, (10), 711–715.
- A. R. Krause and R. A. Chernenkoff: ‘A comparative study of the fatigue behavior of spot welded and mechanically fastened aluminum joints’, Paper no. 950710, Society of Automotive Engineering, Warrendale, PA, USA, 1995.
- D. M. Jiang, S. B. Kang and H. W. Kim: J. Mater. Sci. Lett., 1997, 16, 1179–1181.
- A. Gean, J. C. Kucza and J. C. Ehrstrom: Proc. 30th Int. Sym. on ‘Automotive technology and automation’, Firenze, Italy, June 1997, Automotive Automation Ltd, 259–272.
- P.-C. Lin and J. Pan: ‘Fracture and fatigue mechanisms of spot friction welds in lap-shear specimens of aluminum 6111-T4 sheets’, Technical paper no. 2005-01-1247, Society of Automotive Engineering, Warrendale, PA, USA, 2005.
- Y. Uematsu, K. Tokaji and S. Murata: Proc. 6th Int. FSW Sym., Saint-Sauveur, Canada, October 2006, TWI, CD-ROM.
- Y. Uematsu, K. Tokaji, Y. Tozaki, T. Kurita and S. Murata: Int. J. Fatig., 2008, 30, 1956–1966.
- M. Yamamoto, A. Gerlich, T. H. North and K. Shinozaki: Sci. Technol. Weld. Join., 2007, 12, (3), 208–216.
- M. I. Khan, M. L. Kuntz, P. Su, A. Gerlich, A. North and Y. Zhou: Sci. Technol. Weld. Join., 2007, 12, (2), 175–182.
- M. Fukumoto, K. Miyagawa, T. Yasui and M. Tsubaki: Proc. 6th Int. FSW Sym., Saint-Sauveur, Canada, October 2006, TWI, CD-ROM.
- C. D. Allen and W. J. Arbegast: ‘Evaluation of friction spot welds in aluminum alloys’, Technical paper no. 2005-01-1252, Society of Automotive Engineering, Warrendale, PA, USA, 2005.
- Y. Tozaki, Y. Uematsu and K. Tokaji: Fatig. Fract. Eng. Mater. Struct., 2007, 30, 143–148.
- Y. Tozaki, Y. Uematsu and K. Tokaji: Int. J. Mach. Tools Manufact., 2007, 47, 2230–2236.
- Y. Tozaki, Y. Uematsu and K. Tokaji: Proc. Int. Conf. on ‘Advanced technology in experimental mechanics’, Fukuoka, Japan, September 2007, Japan Society of Mechanical Engineers, CD-ROM.