Mechanical properties and strengthening mechanisms in laser beam welds of pure titanium

References

• Leyens C, Peters M: ‘Titanium and titanium alloys: fundamentals and applications’; 2003, Weinheim, Wiley-VCH.
   Google Scholar
• Baeslack WA, Davis JR, Cross CE: ‘Selection and weldability of conventional titanium alloys’, in ‘ASM handbook’, Vol. 6, ‘Welding brazing and soldering’, 507–523; 1993, Materials Park, OH, ASM International.
   Google Scholar
• Sundaresan S, Janaki Ram GD, Madhusudhan Reddy G: ‘Microstructural refinement of weld fusion zones in α–β titanium alloys using pulsed current welding’, Mater. Sci. Eng. A, 1999, A262, 88–100.
   Web of Science ®Google Scholar
• Liu L, Du X, Zhu M, Chen G: ‘Research on the microstructure and properties of weld repairs in TA15 titanium alloy’, Mater. Sci. Eng. A, 2007, A445–A446, 691–696.
   Google Scholar
• Lathabai S, Jarvis BL, Barton KJ: ‘Comparison of keyhole and conventional gas tungsten arc welds in commercially pure titanium’, Mater. Sci. Eng. A, 2001, A299, 81–93.
   Google Scholar
• Roggensack M, Walter MH, Böning KW: ‘Studies on laser- and plasma-welded titanium’, Dent. Mater., 1993, 9, 104–107.
   PubMed Web of Science ®Google Scholar
• Mohandas T, Banerjee D, Kutumba Rao VV: ‘Fusion zone microstructure and porosity in electron beam welds of an α+β titanium alloy’, Metall. Mater. Trans. A, 1999, 30A, 789–798.
   Google Scholar
• Short AB: ‘Gas tungsten arc welding of α+β titanium alloys: a review’, Mater. Sci. Technol., 2009, 25, 309–324.
   Web of Science ®Google Scholar
• Yunlian Q, Ju D, Quan H, Liying Z: ‘Electron beam welding, laser beam welding and gas tungsten arc welding of titanium sheet’, Mater. Sci. Eng. A, 2000, A280, 177–181.
   Web of Science ®Google Scholar
• Denney PE, Metzbower EA: ‘Laser beam welding of titanium’, Weld. J., 1989, 68, 342s–346s.
   Google Scholar
• Caiazzo F, Curcio F, Daurelio G, Minutolo FMC: ‘Ti6Al4V sheets lap and butt joints carried out by CO2 laser: mechanical and morphological characterization’, J. Mater. Process. Technol., 2004, 149, 546–552.
   Web of Science ®Google Scholar
• Wang SH, Wei MD, Tsay LW: ‘Tensile properties of LBW welds in Ti–6Al–4V alloy at evaluated temperatures below 450°C’, Mater. Lett., 2003, 57, 1815–1823.
   Web of Science ®Google Scholar
• Du H, Hu L, Liu J, Hu X: ‘A study on the metal flow in full penetration laser beam welding for titanium alloy’, Comput. Mater. Sci., 2004, 29, 419–427.
   Web of Science ®Google Scholar
• Li C, Muneharua K, Takao S, Kouji H: ‘Fiber laser-GMA hybrid welding of commercially pure titanium’, Mater. Des., 2009, 30, 109–114.
   Web of Science ®Google Scholar
• Li X, Xie J, Zhou Y: ‘Effects of oxygen contamination in the argon shielding gas in laser welding of commercially pure titanium thin sheet’, J. Mater. Sci., 2005, 40, 3437–3443.
   Web of Science ®Google Scholar
• Britton TB, Liang H, Dunne FPE, Wilkinson AJ: ‘The effect of crystal orientation on the indentation response of commercially pure titanium: experiments and simulations’, Proc. R. Soc. A, 2010, 466A, 695–719.
   Google Scholar
• Merson E, Brydson R, Brown A: ‘The effect of crystallographic orientation on the mechanical properties of titanium’, J. Phys. Conf. Ser., 2008, 126, 012020.
   Google Scholar
• Fujii H, Sun Y, Kato H, Nakata K: ‘Investigation of welding parameter dependent microstructure and mechanical properties in friction stir welded pure Ti joints’, Mater. Sci. Eng. A, 2010, A527, 3386–3391.
   Web of Science ®Google Scholar
• Liu H, Nakata K, Yamamoto N, Liao J: ‘Grain orientation and texture evolution in pure titanium lap joint produced by friction stir welding’, Mater. Trans., 2010, 51, 2063–2068.
   Google Scholar
• Wang SC, Aindow M, Starink MJ: ‘Effect of self-accommodation on α/α boundary populations in pure titanium’, Acta Mater., 2003, 51, 2485–2503.
   Web of Science ®Google Scholar
• Gey N, Humbert M: ‘Characterization of the variant selection occurring during the α→β→α phase transformations of a cold rolled titanium sheet’, Acta Mater., 2002, 50, 277–287.
   Web of Science ®Google Scholar
• Thompson AW: ‘Substructure strengthening mechanisms’, Metall. Trans. A, 1977, 8A, 833–842.
   Web of Science ®Google Scholar
• Zhao W, Zhang W, Guo J, Wang B, Guo J, Lu K: ‘Microstructure evolution and tensile properties of pure Ti subjected to rapidly heating and quenching’, J. Mater. Sci. Technol., 2006, 22, 190–194.
   Google Scholar
• Dieter GE: ‘Mechanical metallurgy’, , Metric S I, ed edition; 1988, Singapore, McGraw-Hill.
   Google Scholar
• Butt MZ, Feltham P: ‘Solid-solution hardening’, J. Mater. Sci., 1993, 28, 2557–2576.
   Web of Science ®Google Scholar