Advanced search
Publication Cover
Science and Technology of Welding and Joining Volume 17, 2012 - Issue 6
Journal homepage
499
Views
22
CrossRef citations to date
0
Altmetric
Original Article

Effect of relative location of laser beam and TIG arc in different hybrid welding modes

L M LiuDalian University of Technology, Dalian, ChinaCorrespondence[email protected]
,
S T YuanDalian University of Technology, Dalian, China
&
C B LiDalian University of Technology, Dalian, China
Pages 441-446 | Received 08 Jan 2012, Accepted 14 Apr 2012, Published online: 12 Nov 2013

References

  • Steen WM, Eboo M: ‘Arc augmented laser welding’, Met. Constr., 1979, 7, 332–335.
  • Zhang DQ, Jin X, Gao LX, Joo HG, Lee KY: ‘Effect of laser-arc hybrid welding on fracture and corrosion behaviors of AA6061-T6 alloy’, Mater. Sci. Eng. A, 2011, A528, 2748–2754.
  • Rayes ME, Walz C, Sepold G: ‘The influence of various hybrid welding parameters on bead geometry’, Weld. J., 2004, 83, 147–153.
  • Ribic B, Palmer TA, DebRoy T: ‘Problems and issues in laser-arc hybrid welding’, Int. Mater. Rev., 2009, 54, 223–244.
  • Gao M, Zeng XY, Hu QW: ‘Effects of welding parameters on melting energy of CO2 laser-GMA hybrid welding’, Sci. Technol. Weld. Join., 2006, 11, 517–522.
  • Ribic B, Rai R, DebRoy T: ‘Numerical simulation of heat transfer and fluid flow in GTA/Laser hybrid welding’, Sci. Technol. Weld. Join., 2008, 13, 683–693.
  • Chen YB, Lei ZL, Li LQ, Wu L: ‘Experimental study on welding characteristics of CO2 laser TIG hybrid welding process’, Sci. Technol. Weld. Join., 2006, 11, 403–411.
  • Rieth M, Hoffmann A: ‘Influence of microstructure and notch fabrication on impact bending properties of tungsten materials’, Int. J. Refract. Met. Hard Mater., 2010, 28, 679–686.
  • Rieth M, Hoffmann A: ‘Fracture behaviour of tungsten based alloys depending on microstructure and notch fabrication method’, Fusion Sci. Technol., 2009, 56, 1018–1022.
  • Suder W., Ganguly S., Williams S., Paradowska AM., Colegrove1 P.: ‘Comparison of joining efficiency and residual stresses in laser and laser hybrid welding’, Sci. Technol. Weld. Join., 2011, 16, 244–248.
  • Yan J, Gao M, Zeng XY: ‘Study on microstructure and mechanical properties of 304 stainless steel joints by TIG, laser and laser-TIG hybrid welding’, Opt. Lasers Eng., 2010, 48, 512–517.
  • Qi XD, Liu LM: ‘Comparative study on characteristics of hybrid laser-TIG welded AZ61/Q235 lap joints with and without interlayers’, J. Mater. Sci., 2010, 45, 3912–3920.
  • Liu LM, Liu XJ, Liu SH: ‘Microstructure of laser-TIG hybrid welds of dissimilar Mg alloy and Al alloy with Ce as interlayer’, Scr. Mater., 2006, 55, 383–386.
  • Zhao LM, Zhang ZD: ‘Effect of Zn alloy interlayer on interface microstructure and strength of diffusion-bonded Mg–Al joints’, Scr. Mater., 2008, 58, 283–286.
  • Song G, An GY, Liu LM: ‘Effect of gradient thermal distribution on butt joining of magnesium alloy to steel with Cu–Zn alloy interlayer by hybrid laser-tungsten inert gas welding’, Mater. Des., 2011, 35, 323–329.
  • Song G, Luo ZM: ‘The influence of laser pulse waveform on laser-TIG hybrid welding of AZ31B magnesium alloy’, Opt. Lasers Eng., 2011, 49, 82–88.
  • Pierron N, Sallamand P, Matte S: ‘Study of magnesium and aluminum alloys absorption coefficient during Nd:YAG laser interaction’, Appl. Surf. Sci., 2007, 253, 3208–3214.
  • Liu LM, Song G, Zhu ML: ‘Low-power laser/arc hybrid welding behavior in AZ-based Mg alloys’, Mater. Trans., 2008, 39, 1702–1711.
  • Zhang ZD, Zhang F: ‘Spectral analysis of welding plasma of magnesium alloy using flux coated wire’, Mater. Trans., 2009, 50, 1909–914.
  • Ready JF: ‘Industrial applications of lasers’, 380–382; 1978, New York, Academic Press.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.