References
- Thomas W, Nicholas E, Needham J, Murch M, Templesmith P, Dawes C: ‘Friction stir welding’, GB 9125978·8, 1991.
- Mishra R, Mahoney M, (ed.): ‘Friction stir welding and processing’; 2007, Materials Park, OH, ASM International.
- Hilgert J, Schmidt H, dos Santos J, Huber N: J. Mater. Process. Technol., 2010, 211, (2), 197–204.
- Hattingh D, Blignault C, van Niekerk T, James M: J. Mater. Process. Technol., 2008, 203, (1–3), 46–57.
- Heurtier P, Jones M, Desrayaud C, Driver J, Montheillet F, Allehaux D: J. Mater. Process. Technol., 2006, 171, (3), 348–357.
- Seidel T, Reynolds A: Sci. Technol. Weld. Join., 2003, 8, 175–183.
- Schmidt H: ‘Modelling the thermomechanical conditions in friction stir welding’, PhD thesis, Department of Manufacturing Engineering and Management, Technical University of Denmark, Lyngby, Denmark, 2004.
- Colegrove P, Shercliff H: Sci. Technol. Weld. Join., 2004, 9, 483–492.
- Colegrove P, Shercliff H: Sci. Technol. Weld. Join., 2003, 8, 360–368.
- Colegrove P, Shercliff H: J. Mater. Process. Technol., 2005, 169, 320–327.
- Schmidt H, Hattel J: Proc. COMSOL Conf., Hannover, Germany, November 2008, COMSOL. Paper no. 141.
- Atharifar H, Lin D, Kovacevic R: J. Mater. Eng. Perform., 2009, 18, (4), 339–350.
- Guerdoux S, Fourment L: Modell. Simul. Mater. Sci. Eng., 2009, 17, (7), 075001.
- Arora A, Nandan R, Reynolds AP, DebRoy T: ‘Torque, power requirement and stir zone geometry in friction stir welding through modeling and experiments’, Scr. Mater., 2009, 60, 13–16.
- Deloison D, Jacquin D, Gurin B, Desrayaud C, Marie F: Proc. 3rd FSW Modelling and Material Flow Visualisation Sem., Geesthacht, Germany, April 2008, GKSS, 122–149.
- Aukrust T, LaZghab S: Int. J. Plast., 2000, 16, (1), 59–71.
- Sheppard T: Mater. Sci. Technol., 1993, 9, (11), 430–440.
- Schmidt H, Hattel J: Scr. Mater., 2008, 58, (5), 332–337.
- Schmidt H, Hattel J: Int. J. Offshore Polar Eng., 2004, 14, (4), 294–304.
- Nandan R, Roy GG, Lienert TJ, DebRoy T: ‘Three dimensional heat and material flow during friction stir welding of mild steel’, Acta Mater., 2007, 55, (3), 883–895.
- Schmidt H, Hattel J: Sci. Technol. Weld. Join., 2005, 10, (2), 167–186.
- Schmidt H, Hattel J: Modell. Simul. Mater. Sci. Eng., 2005, 13, 77–93.
- Colegrove P, Shercliff H: Sci. Technol. Weld. Join., 2006, 11, (13), 429–441.
- Schmidt H, Hattel J: Proc. 7th Int. Symp. on ‘Friction stir welding’, Awaji Island, Japan, May 2008, TWI.