Advanced search
Publication Cover
Science and Technology of Welding and Joining Volume 17, 2012 - Issue 6
Journal homepage
125
Views
15
CrossRef citations to date
0
Altmetric
Original Article

Application of vibroacoustic signals to evaluate tools profile changes in friction stir welding on AA 1050 H24 alloy

J Blanco FernándezMechanical Engineering Department, La Rioja University, Spain
,
A Sánchez RocaFaculty of Mechanical Engineering, University of Oriente; Ave. Las Américas s/n; CP90900, Santiago de Cuba, CubaCorrespondence[email protected]
,
H Carvajal FalsFaculty of Mechanical Engineering, University of Oriente; Ave. Las Américas s/n; CP90900, Santiago de Cuba, Cuba
,
E Jiménez MacíasElectrical Engineering Department, La Rioja University, Spain
&
M Pérez de la Parte1Mechanical Engineering Department, La Rioja University, Spain
Pages 501-510 | Received 15 Mar 2012, Accepted 01 May 2012, Published online: 12 Nov 2013

References

  • Uday MB, Fauzi MNAhmad, Zuhailawati H, Ismail AB: ‘Advances in friction welding process: a review’, Sci. Technol. Weld. Join., 2010, 15, (7), 534–558.
  • Hattingh DG, Blignault C, van Niekerk TI, James MN: ‘Characterization of the influences of FSW tool geometry on welding forces and weld tensile strength using an instrumented tool’, J. Mater. Process. Technol., 2008, 203, 46–57.
  • Lorrain O, Favier V, Zahrouni H, Lawrjaniec D: ‘Understanding the material flow path of friction stir welding process using unthreaded tools’, J. Mater. Process. Technol., 2010, 210, 603–609.
  • Padmanaban G, Balasubramanian V: ‘Selection of FSW tool pin profile, shoulder diameter and material for joining AZ31B magnesium alloy – an experimental approach’, Mater. Design, 2009, 30, 2647–2656.
  • de Giorgi M, Scialpi A, Panella FW, de Filippis L: ‘Effect of shoulder geometry on residual stress and fatigue properties of AA6082 FSW joints’, J. Mech. Sci. Technol., 2009, 23, 26–35.
  • Szkodo M, Adamowski J, Sitko A: ‘Assessment of FSW welds made of aluminum alloy AW7075-T651’, Solid State Phenom., 2010, 165, 201–206.
  • Santos TG, Vilaça P, Miranda RM: ‘Electrical conductivity field analysis for evaluation of FSW joints in AA6013 and AA7075 alloys’, J. Mater. Process. Technol., 2011, 211, 174–180.
  • Roca AS, Fals HC, Fernández JB, Macías EJ, Adán FS: ‘New stability index for short circuit transfer mode in GMAW process using acoustic emission signals’, Sci. Technol. Weld. Join., 2007, 15, 131–136.
  • Roca AS, Fals HC, Fernández JB, Macías EJ, de la Parte MP: ‘Artificial neural networks and acoustic emission applied to stability analysis in gas metal arc welding’, Sci. Technol. Weld. Join., 2009, 14, 117–124.
  • Pal K, Bhattacharya S, Pal SK: ‘Investigation on arc sound and metal transfer modes for on-line monitoring in pulsed gas metal arc welding’, J. Mater. Process. Technol., 2010, 210, 1397–1410.
  • Soundararajan V, Atharifar H, Kovacevic R: ‘Monitoring and processing the acoustic emission signals from the friction-stir-welding process’, Proc. Inst. Mech. Eng. B: J. Eng. Manuf., 2006, 220, 1673–1686.
  • Chen Ch, Kovacevic R, Jandgric D: ‘Wavelet transform analysis of acoustic emission in monitoring friction stir welding of 6061 aluminum’, Int. J. Mach. Tools Manuf., 2003, 43, 1383–1390.
  • Macías EJ, Roca AS, Fals HC, Fernández JB, de la Parte MP: ‘Time–frequency diagram applied to stability analysis in gas metal arc welding based on acoustic emission’, Sci. Technol. Weld. Join., 2010, 15, 226–232.
  • Suresha CN, Rajaprakash BM, Sarala U: ‘Applicability of acoustic emission in the analysis of friction stir welded joints’, Int. J. Recent Trends Eng., 2009, 1, 86–89.
  • Vijay SJ, Murugan N: ‘Influence of tool pin profile on the metallurgical and mechanical properties of friction stir welded Al–10 wt.% TiB2 metal matrix composite’, Mater. Design, 2010, 31, 3585–3589.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.