Advanced search
Publication Cover
Science and Technology of Welding and Joining Volume 18, 2013 - Issue 1
Journal homepage
182
Views
9
CrossRef citations to date
0
Altmetric
Original Article

High pressure rolling of low carbon steel weld seams: Part 1 – Effects on mechanical properties and microstructure

H E CoulesCranfield University, Cranfield, BedfordshireMK43 0AL, UKCorrespondence[email protected]
,
P ColegroveCranfield University, Cranfield, BedfordshireMK43 0AL, UK
,
L D CozzolinoCranfield University, Cranfield, BedfordshireMK43 0AL, UK
&
S W WenTata Steel R, D & T, Swinden Technology Centre, Rotherham, South YorkshireS60 3AR, UK
Pages 76-83 | Received 11 Sep 2012, Accepted 11 Oct 2012, Published online: 12 Nov 2013

References

  • Withers PJ: ‘Residual stress and its role in failure’, Rep. Prog. Phys., 2007, 70, (12), 2211–2264.
  • Richards DG, Prangnell PB, Williams SW, Withers PJ: ‘Global mechanical tensioning for the management of residual stresses in welds’, Mater. Sci. Eng. A, 2008, A489, (1–2), 351–362.
  • Coules HE, Colegrove P, Cozzolino LD, Wen SW, Ganguly S, Pirling T: ‘Effect of high pressure rolling on weld-induced residual stresses’, Sci. Technol. Weld. Join., 2012, 17, (5), 394–401.
  • Altenkirch J, Steuwer A, Withers PJ, Williams SW, Poad M, Wen SW: ‘Residual stress engineering in friction stir welds by roller tensioning’, Sci. Technol. Weld. Join., 2009, 14, (2), 185–192.
  • Kondakov GF: ‘High temperature rolling in welding butt joints’, Weld. Int., 1988, 2, (2), 172–175.
  • Cozzolino LD: PhD thesis, Cranfield University.
  • ‘Metallic materials – tensile testing – Part 1: method of test at ambient temperature’, ISO: 6892-1:2009, ISO, Geneva, Switzerland, 2009.
  • Pan B, Qian K, Xie H, Asundi A: ‘Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review’, Meas. Sci. Technol., 2009, 20, (6), 062001.
  • Reynolds AP, Duvall F: ‘Digital image correlation for determination of weld and base metal constitutive behavior’, Weld. J., 1999, 78, (10), 355s–360s.
  • Peel MJ, Steuwer A, Preuss M, Withers PJ: ‘Microstructure, mechanical properties and residual stresses as a function of welding speed in aluminium AA5083 friction stir welds’, Acta Mater., 2003, 51, (16), 4791–4801.
  • Turski M, Smith MC, Bouchard PJ, Edwards L, Withers PJ: ‘Spatially resolved materials property data from a uniaxial cross-weld tensile test’, J. Press. Ves. Technol., 2009, 131, (6), 0614061–0614067.
  • ‘Metallic materials – Charpy pendulum impact test – Part: test method’, ISO, Geneva, Switzerland, 2010.
  • Coules HE, Colegrove P, Cozzolino LD, Wen SW, Kelleher JF: ‘High-pressure rolling of low-carbon steel weld seams. Part 2: Roller geometry and residual stress’, Sci. Technol. Weld Join., 2013, 18, (1), 84–90.
  • Pavlina EJ, Van Tyne CJ: ‘Correlation of yield strength and tensile strength with hardness for steels’, J. Mater. Eng. Perform., 2008, 17, (6), 888–893.
  • Kou S: ‘Welding metallurgy’, 122–141; 2003, New York, Wiley.
  • Jones SJ, Bhadeshia HKDH: ‘Competitive formation of inter- and intragranularly nucleated ferrite’, Metall. Mater. Trans. A: Phys. Metall. Mater. Sci., 1997, 28, (10), 2005–2013.
  • Bhadeshia HKDH: ‘Bainite in steels’, 2nd edn; 2001, IOM Communications Ltd, London, UK.
  • Lee CH, Bhadeshia HKDH, Lee H.-C: ‘Effect of plastic deformation on the formation of acicular ferrite’, Mater. Sci. Eng. A, A360, (1–2), 249–257.
  • Babu SS: ‘The mechanism of acicular ferrite in weld deposits’, Curr. Opin. Solid State Mater. Sci., 2004, 8, (3–4), 267–278.
  • Shipway PH, Bhadeshia HKDH: ‘The effect of small stresses on the kinetics of the bainite transformation’, Mater. Sci. Eng. A, 1995, A201, (1–2), 143–149.
  • Seyffarth P, Meyer B, Scharff A: ‘Großer Atlas Schweiß-ZTU-Schaubilder’; 1992, DVS Verlag, Düsseldorf, Germany.
  • Shim J.-H, Byun J.-S, Cho YW, Oh Y.-J, Shim J.-D, Lee DN: ‘Hot deformation and acicular ferrite microstructure in C–Mn steel containing Ti2O3 inclusions’, ISIJ Int., 2000, 40, (8), 819–823.
  • Barnett MR, Jonas JJ: ‘Distinctive aspects of the physical metallurgy of warm rolling’, ISIJ Int., 1999, 39, (9), 856–873.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.