References
- Altenkirch J, Steuwer A, Withers PJ, Williams SW, Poad M, Wen SW: ‘Residual stress engineering in friction stir welds by roller tensioning’, Sci. Technol. Weld. Join., 2009, 14, (2), 185–192.
- Coules HE, Colegrove P, Cozzolino LD, Wen SW, Ganguly S, Pirling T: ‘Effect of high pressure rolling on weld-induced residual stresses’, Sci. Technol. Weld. Join., 2012, 17, (5), 394–401.
- Coules HE, Cozzolino LD, Colegrove P, Ganguly S, Wen SW, Pirling T: ‘Neutron diffraction analysis of complete residual stress tensors in conventional and rolled gas metal arc welds’, Exp. Mech., to be published.
- Nguyen NT, Wahab MA: ‘The effect of undercut, misalignment and residual stresses on the fatigue behaviour of butt welded joints’, Fatigue Fract. Eng. Mater. Struct., 1996, 19, (6), 769–778.
- Kirkhope KJ, Bell R, Caron L, Basu RI, Ma K.-T: ‘Weld detail fatigue life improvement techniques. Part 1: review’, Mar. Struct., 1999, 12, (6), 447–474.
- Cheng X, Fisher JW, Prask HJ, Gnäupel-Herold T, Yen BT, Roy S: ‘Residual stress modification by post-weld treatment and its beneficial effect on fatigue strength of welded structures’, Int. J. Fatigue, 2003, 25, (9–11), 1259–1269.
- Coules HE, Colegrove P, Cozzolino LD, Wen SW: ‘High-pressure rolling of low-carbon steel weld seams. Part 1: effects on mechanical properties and microstructure’, Sci. Technol. Weld. Join., 2013, 18, (1), 76–83.
- Santisteban JR, Daymond MR, James JA, Edwards L: ‘ENGIN-X: a third-generation neutron strain scanner’, J. Appl. Crystallogr., 2006, 39, (6), 812–825.
- Pawley GS: ‘Unit-cell refinement from powder diffraction scans’, J. Appl. Crystallogr., 1981, 14, (6), 357–361.
- Withers PJ, Preuss M, Steuwer A, Pang JWL: ‘Methods for obtaining the strain-free lattice parameter when using diffraction to determine residual stress’, J. Appl. Crystallogr., 2007, 40, (5), 891–904.
- Altenkirch J, Peel MJ, Steuwer A, Withers PJ: ‘Comparison of methods to determine variations in unstrained unit cell parameter across welds’, J. Strain Anal. Eng. Des., 2011, 46, (7), 651–662.
- Baratta FI, Matthews WT: ‘Errors associated with flexure testing of brittle materials’, Technical report no. MTL TR 87-35, US Army Materials Technology Laboratory, 1987, Watertown, MA, USA.
- Law M, Kirstein O, Luzin V: ‘An assessment of the effect of cutting welded samples on residual stress measurements by chill modelling’, J. Strain Anal. Eng. Des., 2010, 45, (8), 567–573.
- Lewis SJ, Hossain S, Smith DJ, Truman CE, Hofmann M: ‘Determination of remnant residual stresses in fracture toughness specimens extracted from large components’, Strain, 2011, 47, (Suppl. 1), e333–e343.
- Altenkirch J, Steuwer A, Peel MJ, Withers PJ: ‘The extent of relaxation of weld residual stresses on cutting out cross-weld test-pieces’, Powder Diffract., 2009, 24, (Suppl. 1), S31–S36.