References
- Terashima S, Bhadeshia HKDH: ‘Changes in toughness at low oxygen concentrations in steel weld metals’, Sci. Technol. Weld. Join., 2006, 11, (5), 509–516.
- Nakamura S, Hasegawa T, Shimura R, Kimoto I: Effect of oxygen content on toughness in high strength weld metal, Mater. Sci. Forum, 2009, 638–642, 3687–3692.
- Farrar RA, Harrison PL: ‘Acicular ferrite in carbon-manganese weld metals: an overview’, J. Mater. Sci., 1987, 22, 3812–3820.
- Koseki T, Thewlis G: ‘Overview – inclusion assisted microstructure control in c-mn and low alloy steel welds’, Mater. Sci. Technol., 2005, 21, (8), 867–879.
- Sarma DS, Karasev AV, Jonsson PG: ‘On the role of non-metallic inclusions in the nucleation of acicular ferrite in steels’, ISIJ Int., 2009, 49, (7), 1063–1074.
- Dowling J, Corbett J, Kerr H: ‘Inclusion phases and the nucleation of acicular ferrite in submerged arc welds in high strength low alloy steels’, Metall. Mater. Trans. A, 1986, 17A, 1611–1623.
- Grong O, Kluken AO, Nylund HK, Dons AL, Hjelen J: ‘Catalyst effects in heterogeneous nucleation of acicular ferrite’, Metall. Mater. Trans. A, 1995, 26A, 525–534.
- Bhadeshia HKDH, Honeycombe RWK: ‘Steels: microstructure and properties’, ‘Metallurgy and materials science series; 2006, Butterworth-Heinemann.
- Sato M, Hara N: ‘Welding consumables for 780 and 950 mpa class of high-strength steel’, Weld. Int., 2011, 25, (9), 663–669.
- Zachrisson J, Börjesson J, Karlsson L: ‘A new ebsd based methodology for the quantitative characterisation of microstructures formed by displacive fcc-bcc transformations’, Micron, 2013, 45, (0), 45–54.
- Börjesson J, Zachrisson J, Karlsson L: ‘The role of ni in high strength low alloy weld metals’, Proc. 2nd. Int. Conf. on ‘Super-high strength steels’, Peschiera del Garda (Verona), Italy, October 2010, Associazione Italiana di Metallurgia, Milano, 2010.
- Chatfield C: ‘Statistics for technology: a course in applied statistics’, 3rd edn; 1983, Taylor & Francis.
- Evans GM: ‘The effect of aluminium in shielded metal arc C-Mn steel multipass deposits’, Weld. J., 1991, 1, 32s–39s.
- Madariaga I, Gutierrez I, Bhadeshia HKDH: ‘Acicular ferrite morphologies in a medium microalloyed steel’, Metall. Mater. Trans. A, 2001, 32A, (9), 2187–2197.
- Diaz-Fuentes M, Iza-Mendia A, Gutierrez I: ‘Analysis of different acicular ferrite microstructures in low-carbon steels by electron backscattered diffraction’, ‘Study of their toughness behaviour’, Metall. Mater. Trans. A, 2003, 34A, 2505–2516.
- Abson DJ: ‘Non-metallic inclusion in ferritic steel weld metals – a review’, Weld. World, 1989, 27, (3/4), 76–100.
- Babu SS: ‘The mechanism of acicular ferrite in weld deposits’, Curr. Opin. Solid State Mater. Sci., 2004, 8, (3/4), 267–278.
- Kikuchi Y, Sudo H, Kuzuu N: ‘Thermal expansion of vitreous silica: correspondence between dilatation curve and phase transitions in crystalline silica’, J. Appl. Phys., 1997, 82, (8), 4121–4123.
- Takayama N, Miyamoto G, Furuhara T: ‘Effects of transformation temperature on variant pairing of bainitic ferrite in low carbon steel’, Acta Mater., 2012, 60, (5), 2387–2396.
- Mills AR, Thewlis G, Whiteman JA: ‘ Nature of inclusions in steel weld metals and their influence on formation of acicular ferrite’, Mater. Sci. Technol., 1987, 3, (12), 1051–1061.
- Yamada T, Terasaki H, Komizo Y: ‘ Microscopic observation of inclusions contributing to formation of acicular ferrite in steel weld metal’, Sci. Technol. Weld. Join., 2008, 13, (2), 118–125.