References
- Jones, W. K. C. and Alberry, P. J.: Met. Technol., 1977, 11, 557–566.
- Ohta, A., Suzuki, N., Maeda, Y., Hiraoka, K. and Nakamura, T.: Int. J. Fatigue, 1999, 21, S113–S118.
- Ohta, A., Watanabe, O., Matsuoka, K., Shiga, C., Nishijima, S., Maeda, Y., Suzuki, N. and Kubo, T.: Weld. World, 1999, 43, 38–42.
- Withers, P. J. and Bhadeshia, H. K. D. H.: Mater. Sci. Technol., 2001, 17, 355–365.
- Withers, P. J. and Bhadeshia, H. K. D. H.: Mater. Sci. Technol., 2001, 17, 366–375.
- Ohta, A., Matsuoka, K., Nguyen, N. T., Maeda, Y. and Suzuki, N.: Weld. J., 2003, 82, 77s–83s.
- Eckerlid, J., Nilsson, T. and Karlsson, L.: Sci. Technol. Weld. Join., 2003, 8, 353–359.
- Lixing, H., Dongpo, W., Wenxian, W. and Tainjin, Y.: Weld. World, 2004, 48, 34–39.
- Zenitani, S., Hayakawa, N., Yamamoto, J., Hiraoka, K., Morikage, Y., Yauda, T. and Amano, K.: Sci. Technol. Weld. Join., 2007, 12, 516–522.
- Francis, J. A., Stone, H. J., Kundu, S., Rogge, R. B., Bhadeshia, H. K. D. H., Withers, P. J. and Karlsson, L.: ‘Transformation temperatures and welding residual stresses in ferritic steels’, Proc. ASME Pressure Vessels and Piping Division Conf., San Antonio, TX, USA, July 2007, American Society of Mechanical Engineers, 1–8.
- Darcis, P. P., Katsumoto, H., Payares-Asprino, M. C., Liu, S. and Siewert, T. A.: Fatigue Fract. Eng. Mater. Struct., 2008, 31, 125–136.
- Payares-Asprino, M. C., Katsumoto, H. and Liu, S.: Weld. J., 2008, 87, 279s–289s.
- Dai, H., Francis, J. A., Stone, H. J., Bhadeshia, H. K. D. H. and Withers, P. J.: Metall. Mater. Trans. A, 2008, 39A, 3070–3078.
- Mikami, Y., Morikage, Y., Mochizuki, M. and Toyoda, M.: Sci. Technol. Weld. Join., 2009, 14, 97–105.
- Shirzadi, A. A., Bhadeshia, H. K. D. H., Karlsson, L. and Withers, P. J.: Sci. Technol. Weld. Join., 2009, 14, 559–565.
- Moat, R. J., Stone, H. J., Shirzadi, A. A., Francis, J. A., Kundu, S., Bhadeshia, A. F. M. H. K. D. H., Karlsson, L. and Withers, P. J.: Sci. Technol. Weld. Join., 2011, 16, 279–284.
- Kromm, A. and Kannengiesser, T.: Weld. World, 2011, 55, 48–56.
- Özdemir, O., Çam, G., Çimenoğlu, H. and Koçak, M.: Int. J. Surf. Sci. Eng., 2012, 6, 157–173.
- Altenkirch, J., Gibmeier, J., Kromm, A., Kannengiesser, T., Nitschke-Pagel, T. and Hofmann, M.: Mater. Sci. Eng. A, 2011, A528, 5566–5575.
- Altenkirch, J., Gibmeier, J., Kostov, V., Kromm, A., Kannengiesser, T., Doyle, S. and Wanner, A.: J. Strain Anal., 2011, 46, 563–579.
- Kundu, A., Bouchard, P. J., Kumar, S., Venkata, K. A., Francis, J. A., Paradowska, A., Dey, G. K. and Truman, C. E.: Sci. Technol. Weld. Join., 2012, 18, 70–75.
- Xu, M. J., Lu, H., Yu, C., Xu, J. J. and Chen, J. M.: Sci. Technol. Weld. Join., 2013, 18, 184–190.
- Koistinen, D. P. and Marburger, R. E.: Acta Metall., 1959, 7, 59–60.
- Francis, J. A., Turski, M. and Withers, P. J.: Mater. Sci. Technol., 2009, 25, 325–334.
- Francis, J. A., Stone, H. J., Kundu, S., Rogge, R. B., Bhadeshia, H. K. D. H., Withers, P. J. and Karlsson, L.: J. Pres. Ves. Technol., 2009, 131, 0414011–0414018.
- Karlsson, L., Mráz, L., Bhadeshia, H. K. D. H. and Shirzadi, A.: Weld. Inst. Bull., 2010, 5, 33–39.
- Karlsson, L. and Mráz, L.: ‘Increasing fatigue life with Low Transformation temperature (LTT) welding consumables’, Zváranie svarováni, 2011, 1–2, 8–15.
- Miki, K. T. C. and Hanji, T.: Weld. World, 2012, 56, 40–50.
- Yang, H.-S. and Bhadeshia, H. K. D. H.: Mater. Sci. Technol., 2007, 23, 556–560.
- Fitzpatrick, M. E. and Lodini, A.: ‘Analysis of residual stress by diffraction using neutron and synchrotron radiation’; 2003, Boca Raton, FL, CRC Press.
- Hofmann, M., Seidl, G. A., Kornmeier, J. R., Garde, U., Schneider, R., Wimpory, R. C., Wasmuth, U. and Noster, U.: Mater. Sci. Forum, 2006, 524–525, 211–216.
- Santisteban, J. R.: J. Appl. Crystallogr., 2006, 39, 812–825.
- Daymond, M. R. and Priesmeyer, H. G.: Acta Mater., 2002, 50, 1613–1626.
- Pang, J. W. L., Holden, T. M. and Mason, T. E.: J. Strain Anal. Eng. Des., 1998, 33, 373–383.
- Daymond, M. R., Bourke, M. A. M., Dreele, R. B. V., Clausen, B. and Lorentzen, T.: J. Appl. Phys., 1997, 82, 1554–1562.
- Withers, P. J., Preuss, M., Steuwer, A. and Pang, J. W. L.: J. Appl. Crystallogr., 2007, 40, 891–904.
- Eigenmann, B. and Macherauch, E.: Materialwiss. Werkstofftech., 1996, 27, 426–437.
- Hutchings, M. T., Withers, P. J., Holden, T. M. and Lorentzen, T.: ‘Introduction to the characterization of residual stress by neutron diffraction’; 2005, Boca Raton, FL, Taylor & Francis.
- Bhadeshia, H. K. D. H., Francis, J. A., Stone, H. J., Kundu, S., Rogge, R. B., Withers, P. J. and Karlsson, L.: ‘Transformation plasticity in steel weld metals’, Proc. 10th Int. Aachen Welding Conf., Aachen, Germany, October 2007, Aachen University, 22–25.
- Tyas, N. H.: ‘Grain refinement of austenitic stainless steel welds to facilitate ultrasonic inspection’, PhD thesis, University of Cambridge, Cambridge, UK, 2000.
- Bhadeshia, H. K. D. H. and Svensson, L.-E.: ‘Modelling the evolution of microstructure in steel weld metals’, in ‘Mathematical modelling of weld phenomena’, (ed. Cerjak, H. and Easterling, K. E.), Vol. 1, 109–182; 1993, London, The Institute of Materials.
- Kou, S.: ‘Welding metallurgy’; 2002, Hoboken, NJ, Wiley-Interscience.