Numerical and experimental investigation on friction stir lap welding of aluminium to steel

Reference

• DebRoy, T. and Bhadeshia, H. K. D. H.: ‘Friction stir welding of dissimilar alloys – a perspective’, Sci. Technol. Weld. Join., 2010, 15, (4), 266–270.
   Web of Science ®Google Scholar
• Barnes, T. A. and Pashby, I. R.: ‘Joining techniques for aluminium space frames used in automobiles: Part I - solid and liquid phase welding’, J. Mater. Process. Technol., 2000, 99, (1), 62–71.
   Google Scholar
• Park, S. H. C., Sato, Y. S. and Kokawa, H.: ‘Mechanical properties and microstructure in friction-stir-weld of magnesium alloy AZ61’, Proc. 7th Int. Symp., Kobe, Japan, 2001, JWS, 639–644.
   Google Scholar
• Brandon, D. and Kaplan, W. D.: ‘Joining process’, 11–16; 1997, Chichester, John Wiley & Sons.
   Google Scholar
• Elrefaey, A., Gouda, M., Takahashi, M. and Ikeuchi, K.: ‘Characterization of aluminium/steel lap joint by friction stir welding’, J. Mater. Eng. Perform., 2005, 14, (2), 10–17.
   Google Scholar
• Maruzen (ed.): ‘Welding handbook’, 496; 1990, Jpn Weld Soc.
   Google Scholar
• Aritoshi, M. and Okita, K.: ‘Friction welding of dissimilar metals’, Quart. J. Jpn Weld. Soc., 2002, 71, (6), 432–436.
   Google Scholar
• Ikeuchi, K., Yamamoto, N., Takahashi, M. and Aritoshi, M.: ‘Eeefect of interfacial reaction layer on bond strength of friction-bonded joints of Al aloooys to steel’, Trans. JWRI, 2005, 34, (1), 1–9.
   Google Scholar
• Lee, W., Schmuecker, M., Mercardo, U. A., Biallas, G. and Jung, S.: ‘Interfacial reaction in steel-aluminum joints made by friction stir welding’, Scr. Mater., 2006, 55, (4), 355–358.
   Web of Science ®Google Scholar
• Movahedi, M., Kokabi, A. H., Seyed Reihani, S. M. and Najafi, H.: ‘Effect of tool travel and rotation speeds on weld zone defects and joint strength of aluminium steel lap joints made by friction stir welding’, Sci. Technol. Weld. Join., 2012, 17, (2), 162–167.
   Web of Science ®Google Scholar
• Kimapong, K. and Watanabe, T.: ‘Lap Joint of A5083 aluminum alloy and SS400 steel by friction stir welding’, Mater. Trans., JIM, 2005, 46, (4), 835–841.
   Google Scholar
• Watanabe, T., Takayama, H. and Yanagisawa, A.: ‘Joining of aluminum alloy to steel by friction stir welding’, J. Mater. Proc. Technol., 2006, 178, 342–349.
   Web of Science ®Google Scholar
• Chen, Y. C. and Nakata, K.: ‘Effect of the surface state of steel on the microstructure and mechanical properties of dissimilar metal lap joints of aluminum and steel by friction stir welding’, Metall. Mater. Trans. A, 2008, 39A, (8), 1985–1992.
   Google Scholar
• Uzun, H., Donne, C. D., Argagnotto, A., Ghidini, T. and Gambaro, C.: ‘Friction stir welding of dissimilar Al 6013-T4 To X5CrNi18-10 stainless steel’, Mater. Des., 2005, 26, (1), 41–46.
   Google Scholar
• D’Alvise, L., Massoni, E. and Walløe, S. J.: ‘Finite element modelling of the inertia friction welding process between dissimilar materials’, J. Mater. Proc. Technol., 2002, 125–126, 387–391.
   Web of Science ®Google Scholar
• Bhadeshia, H. K. D. H. and DebRoy, T.: ‘Critical assessment – friction stir welding of steels’, Sci. Technol. Weld. Join., 2009, 14, (3), 193–196.
   Web of Science ®Google Scholar
• Rai, R., De, A., Bhadeshia, H. K. D. H. and DebRoy, T.: ‘Review – friction stir welding of tools’, Sci. Technol. Weld. Join., 2011, 16, (4), 325–342.
   Web of Science ®Google Scholar
• Mehta, M., Chatterjee, K. and De, A.: ‘Monitoring torque and traverse force in friction stir welding from input electrical signatures of driving motors’, Sci. Technol. Weld. Join., 2013, 18, (3), 191–197.
   Google Scholar
• Mehta, M., Arora, A., De, A. and Debroy, T.: ‘Tool geometry for friction stir welding-optimum shoulder diameter’, Metall. Mater. Trans. A, 2011, 42A, (9), 2716–2722.
   Web of Science ®Google Scholar
• Arora, A., De, A. and DebRoy, T.: ‘Toward optimum friction stir welding tool shoulder diameter’, Scr. Mater., 2011, 64, (1), 9–12.
   Web of Science ®Google Scholar
• Nandan, R.: ‘Computational modelling of heat transfer and visco-plastic flow in friction stir welding’, PhD thesis, 2008.
   Google Scholar
• Elrefaey, A., Takahashi, M. and Ikeuchi, K.: ‘Friction stir welded lap joint of aluminum to zinc-coated steel’, Quart. J. Jpn Weld. Soc., 2005, 23, (2), 186–193.
   Google Scholar
• ‘Metallography, structure and phase diagram’, in ‘ASM Metals Handbook’, 8th edn; 2004, Materials Park, OH, ASM International.
   Google Scholar
• Pretorius, R., Vredenberg, A. M. and Saris, F. W.: ‘Prediction of phase formation sequence and phase stability in binary metal-aluminum thin-film systems using the effective heat of formation rule’, J. Appl. Phys., 1991, 70, (7), 3636–3646.
   Google Scholar
• Pretorius, R., de Reus, R., Vredenberg, A. M. and Saris, F. W.: ‘Use of the effective heat of formation rule for predicting phase formation sequence in Al./Ni systems’, Mater. Lett., 1990, 9, (12), 494–499.
   Google Scholar
• Bozzi, S., Etter, A. L. H., Baudin, T., Criqui, B. and Kerbiguet, J. G.: ‘Intermetallic compounds in Al 6016/IF-steel friction stir spot welds’, Mater. Sci. Eng. A, 2010, A527, (16–17), 4505–4509.
   Google Scholar
• Zhang, H. T., Feng, J. C., He, P., Zhang, B. B., Chen, J. M. and Wang, L.: ‘The arc characteristics and metal transfer behaviour of cold metal transfer and its use in joining aluminium to zinc-coated steel’, Mater. Sci. Eng. A, 2009, A499, (1–2), 111–113.
   Google Scholar