Microstructure and properties in friction stir weld of 12Cr steel

References

• Mayer, K. H. and Masuyama, F.: ‘The development of creep-resistant steels’, in: ‘Creep-resistant steels’, (ed. Abe, F..), 26–42; 2008, Cambridge, Woodhead Publishing Limited.
   Google Scholar
• Briggs, J. Z. and Parker, T. D.: ‘The super 12% Cr steels’, 40–46; 1965, New York, Climax Molybdenum.
   Google Scholar
• Maruyama, K., Sawada, K. and Koike, J.: ‘Strengthening mechanisms of creep resistant tempered martensite steel’, ISIJ Int., 2001, 41, (6), 641–653.
   Web of Science ®Google Scholar
• Masuyama, F.: ‘History of power plants and progress in heat resistant steels’, ISIJ Int., 2001, 41, (6), 612–625.
   Web of Science ®Google Scholar
• Cerjak, H., Hofer, P. and Schaffernak, B.: ‘The influence of microstructural aspects on the service behaviour of advanced power plant steels’, ISIJ Int., 1999, 39, (9), 874–888.
   Google Scholar
• Castro, R. and de Cadenet, J. J.: ‘Welding metallurgy of stainless and heat-resistant steels’, 45–60; 1975, London, Cambidge University Press.
   Google Scholar
• Folkhard, E., Rabensteiner, G., Perteneder, E., Schabereiter, H. and Tosch, J.: ‘Welding metallurgy of stainless steels’, 48–51; 1988, New York, Springer-Verlag Wien.
   Google Scholar
• Onoro, J.: ‘Weld metal microstructure analysis of 9–12% Cr steels’, Int. J. Pres. Ves. Pip., 2006, 83, 540–545.
   Web of Science ®Google Scholar
• Fenn, R. and Jordan, M. F.: ‘Microstructure of weld heat-affected zone of 12Cr-Mo steel’, Met. Technol., 1982, 9, 327–337.
   Web of Science ®Google Scholar
• Lippold, J. C.: ‘Transformation and tempering behavior of 12Cr-1Mo-0·3V martensitic stainless steel weldments’, J. Nucl. Mater., 1981, 103–104, 1127–1132.
   Google Scholar
• Thomas, W. M., Nicholas, E. D., Needham, J. C., Murch, M. G., Templesmith, P. and Dawes, C. J.: ‘Friction-stir butt welding’, GB Patent Application no. 9125978·8, published December 1991.
   Google Scholar
• Thomas, W. M., Threadgill, P. L. and Nicholas, E. D.: ‘Feasibility of friction stir welding steel’, Sci. Technol. Weld. Join., 1999, 4, (6), 365–372.
   Web of Science ®Google Scholar
• Thomas, W. M., Wiesner, C. S., Marks, D. J. and Staines, D. G.: ‘Conventional and bobbin friction stir welding of 12%Cr chromium alloy steel using composite refractory tool materials’, Sci. Technol. Weld. Join., 2009, 14, (3), 247–253.
   Web of Science ®Google Scholar
• Lakshminarayanan, A. K. and Balasubramanian, V.: ‘An assessment of mirostructure, hardness, tensile and impact strength of friction stir welded ferritic stainless steel joints’, Mater. Des., 2010, 31, 4592–4600.
   Web of Science ®Google Scholar
• Reynolds, A. P., Tang, W., Posada, M. and DeLoach, J.: ‘Friction stir welding of DH36 steel’, Sci. Technol. Weld. Join., 2003, 8, (6), 455.
   Web of Science ®Google Scholar
• Park, S. H. C., Sato, Y. S., Kokawa, H., Okamoto, K., Hirano, S. and Inagaki, M.: ‘Rapid formation of the sigma phase in 304 stainless steel during friction stir welding’, Scr. Mater., 2003, 49, 1175–1180.
   Web of Science ®Google Scholar
• Pickering, F. B.: ‘Physical metallurgy and the design of steels’, 165; 1978, London, Applied Science Publishers Limited.
   Google Scholar
• Leslie, W. C.: ‘The physical metallurgy of steels’, 347; 1981, McGraw-Hill International Book Company.
   Google Scholar
• Siebert, C. A., Doave, D. V. and Breen, D. H.: ‘The hardenability of steels’, 88; 1977, Materials Park, OH, American Society for Metals.
   Google Scholar
• Krauss, G.: ‘Principles of heat treatment of steel’, 127; 1980, Materials Park, OH, American Society for Metals.
   Google Scholar
• Reed-Hill, R. E.: ‘Physical metallergy principles’, 701; 1973, New York, D.Van Nostrand Company.
   Google Scholar
• Kim, H. D. and Kim, I. S.: ‘Effect of austenitizing temperature on microstructure and mechanical properties of 12% Cr steel’, ISIJ Int., 1994, 34, (2), 198–204.
   Web of Science ®Google Scholar
• Bhadeshia, H. K. D. H. and Honeycombe, S. R.: ‘Steel: microstructure and properties’, 3rd edn, 193–194; 2006, Oxford, Elsevier Butterworth-Heinemann Press.
   Google Scholar
• Krauss, G.: ‘Martensite in steel: strength and structure’, Mater. Sci. Eng. A, 1999, A273–A275, 40–57.
   Web of Science ®Google Scholar
• Irvine, K. J., Crowe, D. J. and Fickering, F. B.: ‘The physical metallurgy of 12% chromium steels’, J. Iron Steel Inst., 1960, 195, 386–405.
   Google Scholar
• Bain, E. C. and Paxton, H. W.: ‘Alloying element in steel’, 2nd edn; 1966, Materials Park, OH, American Society for Metals.
   Google Scholar
• Lechtenberg, T.: ‘The effect of microstructure on the mechanical properties of a commercial 12Cr-1Mo steel (HT-9)’, J. Nucl. Mater., 1981, 103–104, 1133–1138.
   Google Scholar
• Coutsouradis, D., Davidson, J. H., Ewald, J., Greenfield, P., Khan, T., Malik, M., Meadowcroft, D. B., Regis, V., Scarlin, R. B., Scarlin and Thornton, D. V. (eds.): ‘Materials for advanced power engineering part I’, 309–318; 1994, Netherlands, Kluwer Academic Publishers.
   Google Scholar
• Loier, C. and Leymonie, C.: ‘Structural transformations and mechanical properties of a 12Cr-Ni-Mo-V steel’, Mater. Sci. Eng., 1984–1985, 68, 165–174.
   Google Scholar
• Kalwa, G.: ‘State of the development and application techniques of the steel X 20 CrMoV 12 1’, Nucl. Eng. Des., 1985, 84, 87–95.
   Google Scholar
• Barraclough, D. R. and Gooch, D. J.: ‘Effect of inadequate heat treatment on creep strength of 12Cr-Mo-V steel’, Mater. Sci. Technol., 1985, 1, (11), 961–967.
   Google Scholar