414
Views
16
CrossRef citations to date
0
Altmetric
Research Paper

Microstructure and mechanical properties of tungsten inert gas welded–brazed Mg/Ti lap joints

, , , &
Pages 443-450 | Received 20 Jan 2014, Accepted 25 Mar 2014, Published online: 12 May 2014

References

  • Zhang ZD, Liu LM, Shen Y and Wang L: ‘Mechanical properties and microstructures of a magnesium alloy gas tungsten arc welded with a cadmium chloride flux’, Mater. Charact., 2008, 59, 40–46.
  • Gao M, Mei SW, Wang ZM, Li XY and Zeng XY: ‘Characterisation of laser welded dissimilar Ti/steel joint using Mg interlayer’, Sci. Technol. Weld. Join., 2012, 17, 269–276.
  • Mordike BL and Ebert T: ‘Magnesium: properties – applications – potential’, Mater. Sci. Eng. A, 2001, A302, 37–45.
  • Tong H, Ueyama T, Harada S and Ushio M: ‘Quality and productivity improvement in aluminium alloy thin sheet welding using alternating current pulsed metal inert gas welding system’, Sci. Technol. Weld. Join., 2001, 6, 203–208.
  • Deng YQ, Sheng GM, Huang ZH and Fan LZ: ‘Microstructure and mechanical properties of diffusion bonded titanium/304 stainless steel joint with pure Ag interlayer’, Sci. Technol. Weld. Join., 2013, 18, 143–146.
  • Gao M, Wang ZM, Yan J and Zeng XY: ‘Dissimilar Ti/Mg alloy butt welding by fibre laser with Mg filler wire – preliminary study’, Sci. Technol. Weld. Join., 2011, 16, 488–496.
  • Jana S, Hovanski Y and Grant GJ: ‘Friction stir lap welding of magnesium alloy to steel: a preliminary investigation’, Metall. Mater. Trans. A, 2010, 41A, 3173–3182.
  • Li LQ, Tan CW, Chen YB, Guo W and Song F: ‘Comparative study on microstructure and mechanical properties of laser welded–brazed Mg/mild steel and Mg/stainless steel joints’, Mater. Des., 2013, 43, 59–65.
  • Aonuma M and Nakata K: ‘Effect of alloying elements on interface microstructure of Mg–Al–Zn magnesium alloys and titanium joint by friction stir welding’, Mater. Sci. Eng. B, 2009, B161, 46–49.
  • Aonuma M and Nakata K: ‘Dissimilar metal joining of ZK60 magnesium alloy and titanium by friction stir welding’, Mater. Sci. Eng. B, 2012, B177, 543–548.
  • Atieh AM and Khan TI: ‘Transient liquid phase (TLP) brazing of Mg–AZ31 and Ti–6Al–4V using Ni and Cu sandwich foils’, Sci. Technol. Weld. Join., 2014, 19, 333–342.
  • Gao M, Wang ZM, Li XY and Zeng XY: ‘Laser keyhole welding of dissimilar Ti–6Al–4V titanium alloy to AZ31B magnesium alloy’, Metall. Mater. Trans. A, 2011, 43A, 163–172.
  • Li SZ, Shen J, Cao ZM, Wang LZ and Xu N: ‘Effects of mix activated fluxes coating on microstructures and mechanical properties of tungsten inert gas welded AZ31 magnesium alloy joints’, Sci. Technol. Weld. Join., 2012, 17, 467–475.
  • Quan YJ, Chen ZH, Gong XS and Yu ZH: ‘Effects of heat input on microstructure and tensile properties of laser welded magnesium alloy AZ31’, Mater. Charact., 2008, 59, 1491–1497.
  • Laukant H, Wallmann C, Müller M, Korte M, Stirn B, Haldenwanger HG and Glatzel U: ‘Fluxless laser beam joining of aluminium with zinc coated steel’, Sci. Technol. Weld. Join., 2005, 10, 219–226.
  • Gao M, Zeng XY, Tan B and Feng JC: ‘Study of laser MIG hybrid welded AZ31 magnesium alloy’, Sci. Technol. Weld. Join., 2009, 14, 274–281.
  • Li LQ, Tan CW, Chen YB, Guo W and Hu XB: ‘Influence of Zn coating on interfacial reactions and mechanical properties during laser welding–brazing of Mg to steel’, Metall. Mater. Trans. A, 2012, 43A, 4740–4754.
  • Liang P, Tarfa T, Robinson JA, Wagner S, Ochin P, Harmelin MG, Seifert HJ, Lukas HL and Aldinger F: ‘Experimental investigation and thermodynamic calculation of the Al–Mg–Zn system’, Thermochim. Acta, 1998, 314, 87–110.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.