Improving formability of laser welded automotive dual phase steels with local cooling

References

• Farabi N, Chen DL, Li J, Zhou Y and Dong SJ: ‘Microstructure and mechanical properties of laser welded DP600 steel joints’, Mater. Sci. Eng. A, 2010, A527, 1215–1222.
   Web of Science ®Google Scholar
• Kim CH, Choi JK, Kang MJ and Park YD: ‘A study on the CO2 laser welding characteristics of high strength steel up to 1500 MPa for automotive application’, Achiev. Mater. Manuf. Eng., 2010, 139, 79–86.
   Google Scholar
• Sharma RS and Molian P: ‘Yb:YAG laser welding of TRIP780 steel with dual phase and mild steels for use in tailor welded blanks’, Mater. Des., 2009, 30, 4146–4155.
   Web of Science ®Google Scholar
• Sreenivasan N, Xia M, Lawson S and Zhou Y: ‘Effect of laser welding on formability of DP980 steel’, J. Eng. Mater. Technol. Trans., 2008, 130, 0410041–0410049.
   Google Scholar
• Xia M, Sreenivasan N, Lawson S, Zhou Y and Tian Z: ‘A comparative study of formability of diode laser welds in DP980 and HSLA steels’, Eng. Mater. Technol. Trans., 2007, 129, 446–452.
   Web of Science ®Google Scholar
• Farabi N, Chen DL and Zhou Y: ‘Microstructure and mechanical properties of laser welded dissimilar DP600/DP980 dual-phase steel joints’, J. Alloys Compd, 2011, 509, 982–989.
   Web of Science ®Google Scholar
• Westerbaan D, Parkes D, Nayak SS, Chen DL, Biro E, Goodwin F and Zhou Y: ‘Effects of concavity on tensile and fatigue properties in fibre laser welding of automotive steels’, Sci. Technol. Weld. Joining, 2014, 19, 60–68.
   Web of Science ®Google Scholar
• Zhao YY, Zhang YS and Hu W: ‘Effect of welding speed on microstructure, hardness and tensile properties in laser welding of advanced high strength steel’, Sci. Technol. Weld. Joining, 2013, 18, 581–590.
   Web of Science ®Google Scholar
• Panda SK, Sreenivasan N, Kuntz ML and Zhou Y: ‘Numerical simulations and experimental results of tensile test behavior of laser butt welded DP980 steels’, J. Eng. Mater. Technol. Trans., 2008, 130, 0410031–0410039.
   Web of Science ®Google Scholar
• Xia MS, Kuntz ML, Tian ZL and Zhou Y: ‘Failure study on laser welds of dual phase steel in formability testing’, Sci. Technol. Weld. Joining, 2008, 13, 378–387.
   Web of Science ®Google Scholar
• Panda SK, Li J, Hernandez VHB, Zhou Y and Goodwin F: ‘Effect of weld location, orientation, and strain path on forming behavior of AHSS tailor welded blanks’, J. Eng. Mater. Technol. Trans., 2010, 132, 0410031–04100311.
   Google Scholar
• Li J, Nayak SS, Biro E, Panda SK, Goodwin F and Zhou Y: ‘Effects of weld line position and geometry on the formability of laser welded high strength low alloy and dual-phase steel blanks’, Mater. Des., 2013, 52, 757–766.
   Web of Science ®Google Scholar
• Panda SK, Kuntz ML amd Zhou Y: ‘Finite element analysis of effects of soft zones on formability of laser welded advanced high strength steels’, Sci. Technol. Weld. Joining, 2009, 14, 52–61.
   Web of Science ®Google Scholar
• Panda SK, Hernandez VHB, Kuntz ML and Zhou Y: ‘Formability analysis of diode-laser-welded tailored blanks of advanced high-strength steel sheets’, Metall. Mater. Trans. A, 2009, 40A, 1955–1967.
   Google Scholar
• Panda SK and Kumar DR: ‘Experimental and numerical studies on the forming behavior of tailor welded steel sheets in biaxial stretch forming’, Mater. Des., 2010, 31, 1365–1383.
   Google Scholar
• Xia M, Biro E, Tian Z and Zhou Y: ‘Effects of heat input and martensite on HAZ softening in laser welding of dual-phase steels’, ISIJ Int., 2008, 48, 809–814.
   Web of Science ®Google Scholar
• Hernandez VHB, Nayak SS and Zhou Y: ‘Tempering of martensite in dual-phase steels and its effects on softening behavior’, Metall. Mater. Trans. A, 2011, 42A, 3115–3129.
   Google Scholar
• Fratini L, Buffa G and Shivpuri R: ‘In-process heat treatments to improve FS-welded butt joints’, Int. J. Adv. Manuf. Technol., 2009, 43, 664–670.
   Web of Science ®Google Scholar
• Sharma C, Dwivedi DK and Kumar P: ‘Influence of in-process cooling on tensile behaviour of friction stir welded joints of AA7039’, Mater. Sci. Eng. A, 2012, A556, 479–87.
   Web of Science ®Google Scholar
• Fratini L, Buffa G and Shivpuri R: ‘Mechanical and metallurgical effects of in process cooling during friction stir welding of AA7075-T6 butt joints’, Acta Mater., 2010, 58, 2056–2067.
   Google Scholar
• Zhang HJ, Liu HJ and Yu L: ‘Effect of water cooling on the performances of friction stir welding heat-affected zone’, J. Mater. Eng. Perform., 2012, 21, 1182–1187.
   Web of Science ®Google Scholar
• Gabzdyl J, Johnson A, Williams S and Price D: ‘Laser weld distortion control by cryogenic cooling’, Proc. 1st Int. Symp. on ‘High-power laser macroprocessing’, Osaka, Japan, May 2002, 269–274, Proc. SPIE 4831.
   Google Scholar
• Hamatani H, Miyazaki Y, Otani T, Ohkita S and Environmental conscious ultra-fine-grained steel consortium of JRCM: ‘Minimization of heat-affected zone size in welded ultra-fine grained steel under cooling by liquid nitrogen during laser welding’, Mater. Sci. Eng. A, 2006, A426, 21–30.
   Google Scholar
• Zhang XD, Chen WZ, Ashida E and Matsuda F: ‘Relationship between weld quality and optical emissions in underwater Nd: YAG laser welding’, Opt. Laser Eng., 2004, 41, 717–730.
   Google Scholar
• Majumdar JD: ‘Underwater welding-present status and future scope’, J. Nav. Archit. Mar. Eng., 2006, , 39–48.
   Google Scholar
• Kapustka N, Conrardy C, Babu S and Albright C: ‘Effect of GMAW process and material conditions on DP 780 and TRIP 780 welds’, Weld. J., 2008, 87, 135–148.
   Web of Science ®Google Scholar
• Hecker SS: ‘A cup test for assessing stretchability’, Met. Eng. Quart., 1974, 14, 30–36.
   Google Scholar
• Mochizuki M, Shintomi T, Hashimoto Y and Toyoda M: ‘Analytical study on deformation and strength in HAZ-softened welded joints of fine-grained steels’, Weld. World, 2004, 48, 2–12.
   Google Scholar
• Hochhauser F, Ernst W, Rauch R, Vallantand R and Enzinger N: ‘Influence of the soft zone on the strength of welded modern HSLA steels’, Weld. World, 2012, 56, 77–85.
   Google Scholar
• Jaber HL, Pouranvari M, Marashi SPH, Alizadeh-Sh M, Salim RK and Hashim FA: ‘Dissimilar spot welding of dual phase steel/ferritic stainless steel: phase transformations’, Sci. Technol. Weld. Joining, 2014, 19, 565–571.
   Web of Science ®Google Scholar
• Furuhara T, Kobayashi K and Maki T: ‘Control of cementite precipitation in lath martensite by rapid heating and tempering’, ISIJ Int., 2004, 44, 1937–1944.
   Web of Science ®Google Scholar
• Hernandez VHB, Panda SK, Okita Y and Zhou NY: ‘A study on heat affected zone softening in resistance spot welded dual phase steel by nanoindentation’, J. Mater. Sci., 2010, 45, 1638–1647.
   Web of Science ®Google Scholar
• Xue P, Xiao BL, Zhang Q and Ma ZY: ‘Achieving friction stir welded pure copper joints with nearly equal strength to the parent metal via additional rapid cooling’, Scr. Mater., 2011, 64, 1051–1054.
   Web of Science ®Google Scholar
• Mukherjee M, Chintha AR, Raj A, Pathak P and Haldar A: ‘Effect of short duration tempering on the microstructure and mechanical properties of a continuously annealed dual phase steel’, Mater. Sci. Technol., 2012, 28, 971–979.
   Web of Science ®Google Scholar
• Genevois C, Deschamps A and Vacher P: ‘Comparative study on local and global mechanical properties of 2024 T351, 2024 T6 and 5251 O friction stir welds’, Mater. Sci. Eng. A, 2006, A415, 162–170.
   Google Scholar
• Jiang Z, Ren L, Huang J, Ju X, Wu H, Huang Q and Wu Y: ‘Microstructure and mechanical properties of the TIG welded joints of fusion CLAM steel’, Fusion Eng. Des., 2010, 85, 1903–1908.
   Google Scholar
• Kahl S and Osikowicz W: ‘Composite aluminum-copper sheet material by friction stir welding and cold rolling’, J. Mater. Eng. Perform., 2013, 22, 2176–2184.
   Web of Science ®Google Scholar
• Maurer W, Ernst W, Rauch R, Kapl S, Pohl A, Krüssel T, Vallant R and Enzinger N: ‘Electron beam welding of a TMCP steel with 700 MPa yield strength’, Weld. World, 2012, 56, 85–94.
   Google Scholar
• Song Y and Hua L: ‘Influence of inhomogeneous constitutive properties of weld materials on formability of tailor welded blanks’, Mater. Sci. Eng. A, 2012, A552, 222–229.
   Google Scholar