Microstructure and fracture behaviour of flash butt welds between dissimilar steels

References

• Rybov VR, Rabkin DM and Kurochko RS: ‘Welding of dissimilar metals and alloys: Mashinostroenie’; 1984, Moscow, Mashinostroenie.
   Google Scholar
• Nikolaev G A (ed.): ‘Welding engineering handbook’, Vol. 2; 1978, Moscow, Mashinostroenie.
   Google Scholar
• Mousavi SAA and Sartangi PF: ‘Experimental investigation of explosive welding of cp-titanium/AISI 304 stainless steel’, Mater. Des., 2009, 30, 459–468.
   Web of Science ®Google Scholar
• Bina MH, Dehghani F and Salimi M: ‘Effect of heat treatment on bonding interface in explosive welded’, Mater. Des., 2013, 45, 504–509.
   Web of Science ®Google Scholar
• Zhanga Yu, Babu SS, Prothec C, Blakely M, Kwasegroch J, Laha M and Daehn GS: ‘Application of high velocity impact welding at varied different length scales’, J. Mater. Process. Technol., 2011, 211, 944–952.
   Google Scholar
• Torkamany MJ, Tahamtan S and Sabbaghzadeh J: ‘Dissimilar welding of carbon steel to 5754 aluminum alloy by Nd:YAG pulsed laser’, Mater. Des., 2010, 31, 458–465.
   Web of Science ®Google Scholar
• Yao CW, Xu BS, Zhang XC, Huang J, Fu J and Wu YX: ‘Interface microstructure and mechanical properties of laser welding copper–steel dissimilar joint’, Opt. Laser Eng., 2009, 47, 807–814.
   Web of Science ®Google Scholar
• Tomashchuk I, Sallamand P and Jouvard JM: ‘Multiphysical modeling of dissimilar welding via interlayer’, J. Mater. Process. Technol., 2011, 211, 1796–1803.
   Google Scholar
• Zhang J, Shen Q, Luo GQ, Li MJ and Zhang LM: ‘Microstructure and bonding strength of diffusion welding of Mo/Cu joints with Ni interlayer’, Mater. Des., 2012, 39, 81–86.
   Web of Science ®Google Scholar
• Wang T, Zhang BG, Chen GQ, Feng JC and Tang Q: ‘Electron beam welding of Ti-15-3 titanium alloy to 304 stainless steel with copper interlayer sheet’, Trans. Nonferrous Met. Soc. China, 2010, 20, 1824–1834.
   Google Scholar
• Bataev I, Bataev A, Mali V, Burov V, Golovin E, Smirnov A and Prikhodko E: ‘Structure and fatigue crack resistance of multilayer materials produced by explosive welding’, Adv. Mater. Res., 2011, 287–290, 108–111.
   Google Scholar
• Honarpisheh M, Asemabadi M and Sedighi M: ‘Investigation of annealing treatment on the interfacial properties of explosive-welded Al/Cu/Al multilayer’, Mater. Des., 2012, 37, 122–127.
   Web of Science ®Google Scholar
• Prihodko EA, Bataev IA, Mali VI, Nikulina AA, Popeluh AI and Lojkin VS: ‘Structure and fatigue crack resistance of multilayer composites obtained by the technology explosion welding of dissimilar materials’, Deform. Fract. Mater., 2013, 3, 28–34.
   Google Scholar
• Julian DC, Colin (eds.) EW: ‘Handbook of laser technology and applications’; 2003, London, Taylor & Francis.
   Google Scholar
• Gotalsky YuN: ‘Welding of dissimilar steels’; 1981, Kiev, Tehnika.
   Google Scholar
• Zhang F, Lv B, Hu B and Li Y: ‘Flash butt welding of high manganese steel crossing and carbon steel rail’, Mater. Sci. Eng. A, 2007, A454–A455, 288–292.
   Google Scholar
• Kuchuk-Yacenko SI, Shvec YuV and Didkovsky AV: ‘Technology and equipment for butt welding of rail crossings, rail ends through austenitic insert’, Weld. Eng., 2007, 7, 29–32.
   Google Scholar
• Genkin IZ: ‘Welded rails and switches’, Road Track Facil., 2000, 12, 14–20.
   Google Scholar
• Guo M, Wang R, Wang F, Zhang W and Wu W: ‘Welding of railway rail and high manganese steel frog’, Trans. China Weld. Inst., 2002, 6, 25–28.
   Google Scholar
• Nikulina AA, Burov VG, Bataev AA and Bataev VA: ‘Microstructure of the welded joints of frog and rail’, Obrabotka metallov, 2007, 34, 32–34.
   Google Scholar
• Blumauer J and Voest-Alpine Eisenbahnsysteme Gesellschaft m.b.H.: ‘Method for connection of railway point components consisting of cast hard manganese steel or manganese steel rails to a rail made from carbon steel’, US patent 5170932, 15 December 1992.
   Google Scholar
• Allie A, Aglan H and Fateh M: ‘Fatigue crack growth of bainitic rail steel welds’, Sci. Technol. Weld. Joining, 2011, 16, 535–540.
   Web of Science ®Google Scholar
• Panasjuk V V (ed.): ‘Fracture mechanics and strength of materials: handbook’, Vol. 4, ‘Fatigue and cyclic crack resistance of structural materials’; 1990, Kiev, Naukova Dumka.
   Google Scholar
• Dyachenko S: ‘Formation of austenite in iron-carbon steels’; 1982, Moscow, Metallurgy.
   Google Scholar
• Tabatchikova TI: ‘Recrystallization and the possibility of the realization of the α−γ diffusionless transformation during the ultrarapid laser heating of steels’, Phys. Met. Metall., 2008, 3, 275–297.
   Google Scholar
• Tushinsky LI, Bataev AA and Tihomirova LB: ‘Structure of pearlite and structural strength of steel’; 1993, Novosibirsk, Science.
   Google Scholar
• Bataev AA, Nikulina AA and Bataev VA: ‘The investigation of fracture processes of heterogeneous steels joined by the method of contact welding’, Proc. 3rd Int. Forum on ‘Strategic technologies’, Novosibirsk-Tomsk, Russia, June 2008, New York, IEEE, 75–76.
   Google Scholar
• Nikulina AA, Skeeba VYu, Kornienko EE and Mironov EN: ‘Modeling of structure formation processes in the formation of the welded joint of dissimilar steels’, Obrabotka metallov, 2011, 53, 54–61.
   Google Scholar
• Nikulina AA, Bataev AA and Smirnov AI: ‘Structural research of flash butt welded joints of workpieces from dissimilar steels’, Obrabotka metallov, 2010, 47, 23–28.
   Google Scholar
• Bataev AA, Bataev VA, Burov VG, Nikulina AA, Zaharevich EE, Bataev IA, Golovin ED, Ognyov A, Ilyin GP, Ezhak VF, Khlebnikov SV and NSTU: ‘Method for weld joint of manganese steel frog and carbon steel rail’, RU patent 2361030, 10 June 2009.
   Google Scholar