References
- Thomas WM, Nicholas ED, Needhan JC, Murch MG, Temple-Smith P and Dawes CJ: ‘Friction stir butt welding’, International Patent Application No. PCT/GB92/02203, 6 December 1991.
- Kokawa H and Fujii H: ‘Friction stir welding’, 1–293; 2006, Tokyo, Sanpo Publications Inc.
- Mishra RS and Ma ZY: Mater. Sci. Eng. R, 2005, R50, 1–78.
- Nandan R, DebRoy T and Bhadeshia HKD: Prog. Mater. Sci., 2008, 53, 980–1023.
- Takai H: J. Light Met. Weld., 2001, 39, 29–31.
- Kim YG, Fujii H, Komazaki T, Tsumura T and Nakata K: Mater. Sci. Eng. A, 2006, A415, 250–254.
- Colligan K: Weld. J., 1999, 78, 229–237.
- Reynolds AP: Sci. Technol. Weld. Join., 2000, 5, 120–124.
- Sato YS, Kokawa H, Ikeda K, Enomoto M, Jogan S and Hashimoto T: Metall. Mater. Trans. A, 2001, 32A, 941–948.
- Xu S, Deng X, Reynolds AP and Seidel TU: Sci. Technol. Weld. Join., 2001, 6, 191–193.
- Guerra M, Schmidt C, McClure JC, Murr LE and Nunes AC: Mater. Charact., 2003, 49, 95–101.
- Morisada Y, Fujii H, Nagaoka T, Nogi K and Fukusumi M: Composites Part A, 2007, 38A, 2097–2101.
- Schmidt HNB, Dickerson TL and Hattel JH: Acta Mater., 2006, 54, 1199–1209.
- Zettler R, Donath T, dos Santos JF, Beckman F and Lohwasser D: Adv. Eng. Mater., 2006, 8, 487–490.
- Liechty BC and Webb BW: J. Mater. Process. Technol., 2007, 184, 240–250.
- Field DP, Nelson TW, Hovanski Y and Jata KV: Metall. Mater. Trans. A, 2001, 32A, 2869–2876.
- Shibayanagi T: ‘Material flow and crystal orientation distribution in friction stir welding’, Rep. Jpn Inst. Light Met., 2011, 56, 55–72.
- Kumar K and Kailas SV: Mater. Sci. Eng. A, 2008, A485, 367–373.
- Tomimura T, Hirasawa S, Haneda M, Hirano S and Aota K: ‘115 numerical analysis of unsteady-state heat transfer process in spot friction stir welding of aluminum and nickel’, Preprints Natl Meet. JWS, 2004, 75, 32–33.
- Hirasawa S, Haneda M, Hirano S and Tomimura T: ‘Analysis of plastic flow and mixing behavior during friction stir welding’, Proc. JSME Annu. Meet., 2004, 3, 39–40.
- Yoshikawa G, Miyasaka F, Hirata Y, Katayama Y and Fuse T: Sci. Technol. Weld. Join., 2012, 17, 255–263.
- Ulysse P: Int. J. Mach. Tools Manuf., 2002, 42, 1549–1557.
- Song M and Kovacevic R: Proc. Inst. Mech. Eng. B: J. Eng. Manuf., 2002, 217B, 73–85.
- Atharifar H, Lin D and Kovacevic R: J. Mater. Eng. Perform., 2009, 18, 339–350.
- Schmidt H and Hattel J: Model. Simul. Mater. Sci. Eng., 2005, 13, 77–93.
- Nandan R, Roy GG, Lienert TJ and Debroy T: Acta Mater., 2007, 55, 883–895.
- Sun N, Zhou H, North TH and Yin YH: Sci. Technol. Weld. Join., 2010, 15, 239–241.
- Horie S, Shinozaki K, Yamamoto M and North TH: Sci. Technol. Weld. Join., 2010, 15, 666–670.
- Morisada Y, Fujii H, Kawahito Y, Nakata K and Tanaka M: Scr. Mater., 2011, 65, 1085–1088.
- Fujii H, Cui L, Maeda M and Nogi K: Mater. Sci. Eng. A, 2006, A419, 25–31.
- Doude HR, Schneider JA and Nunes AC: Metall. Mater. Trans. A, 2014, 45A, 4411–4422.