References
- King RP: ‘Analysis and quality monitoring of a self-pierce riveting process’, PhD thesis, University of Hertfordshire, Hertfordshire, UK, 1997.
- Sun X and Khaleel MA: ‘Strength estimation of self-piercing rivets using lower bound limit load analysis’, Sci. Technol. Weld. Join., 2005, 10, (5), 624–635.
- Di Franco G, Fratini L, Pasta A and Ruisi VF: ‘On the self-piercing riveting of aluminium blanks and carbon fibre composite panels’, Int. J. Mater. Form., 2013, 6, (1), 137–144.
- Khezri R and Melander A: ‘Simulation of self piercing riveting of TRIP800 sheet steel in 1+1 mm thickness’, IM-2003-515, Swedish Institute for Metals Research, Sweden, 2003.
- J. Gårdstam: ‘Simulation of self piercing riveting of high strength austenitic stainless steel in 1 and 2 mm sheet thickness’, IM-2004-537, Swedish Institute for Metals Research, Sweden, 2004.
- Haque R, Beynon JH, Durandet Y, Kirstein O and Blacket S: ‘Feasibility of measuring residual stress profile in different self-pierce riveted joints’, Sci. Technol. Weld. Join., 2012, 17, (1), 60–68.
- Haque R, Beynon JH, Wong YC, Kirstein O and Durandet Y: ‘Evaluation of residual stress in SPR joint by neutron diffraction’, Adv. Mater. Res., 2011, 409, (1), 575.
- Haque R, Beynon JH and Durandet Y: ‘Characterisation of force-displacement curve in self-pierce riveting’, Sci. Technol. Weld. Join., 2012, 17, (6), 476–488.
- James JA, Santisteban JR, Edwards L and Daymond MR: ‘A virtual laboratory for neutron and synchrotron strain scanning’, Physica B: Condens. Matter, 2004, 350B, (1–3).
- James JA and Edwards L: ‘Application of robot kinematics methods to the simulation and control of neutron beam line positioning systems’, Nucl. Instrum. Methods Phys. Res. Sect. A: Accel. Spectrom. Detect. Assoc. Equip., 2007, 571A, (3), 709–718.
- Haque R, Durandet Y, Wong YC, Paradowska A, Beynon JH and Blacket S: ‘Optimizing the parameters for meaningful measurement of residual strain by neutron diffraction in self-pierce riveted joints’, Sci. Technol. Weld. Join., 2013, 18, (6), 492–499.
- Taylor JR: ‘An introduction to error analysis: the study of uncertainties in physical measurements’; 1982, Mill Valley, CA, University Science Books.
- Hutchings MT, Withers PJ, Holden TM and Lorentzen T: ‘Introduction to the characterization of residual stress by neutron diffraction’; 2005, Boca Raton, FL, Taylor & Francis.
- Doyle ED, Wong YC and Ripley MI: ‘Residual stress evaluation in martensitic stainless steel as a function of gas quenching pressure using thermal neutrons’, Physica B: Condens. Matter, 2006, 385B–386B, 897–899.
- Wimpory R, May P, O’Dowd N, Webster G, Smith D and Kingston E: ‘Measurement of residual stresses in T-plate weldments’, J. Strain Anal. Eng. Des., 2003, 38, (4), 349–365.
- Haque R: ‘Residual stress and deformation in SPR joints of high strength materials’, PhD thesis, Swinburne University of Technology, Melbourne, Australia, 2014.