References
- Kumar A. and DebRoy T.: ‘Calculation of three-dimensional electromagnetic force field during arc welding’, J. Appl. Phys., 2003, 94, (2), 1267–1277.
- Gao H., Wu L. and Dong H.: ‘Numerical simulation of electromagnetic force in Double-sided arc welding process’, J. Mater. Sci. Technol., 2003, 19, (1), 223–224.
- Vendan S. A., Manoharan S., Buvanashekaran G. and Nagamani C.: ‘Simulation of magnetic flux distribution for magnetically impelled arc butt welding of steel tubes’, Multidiscip. Model. Mater. Str., 2009, 5, 229–234.
- Li Y., Luo Z., Bai Y. and Ao S. S.: ‘Investigation of induced magnetic force on liquid nugget during resistance spot welding’, Sci. Technol. Weld. Join., 2013, 18, (4), 329–336.
- Xu G., Hu J. and Tsai H. L.: ‘Three-dimensional modeling of the plasma arc in arc welding’, J. Appl. Phys., 2008, 104, 103301-1–103301-9.
- Sundaresan S., Janaki Ram G. D., Murugesan R. and Viswanathan N.: ‘Combined effect of inoculation and magnetic arc oscillation on microstructure and tensile behaviour of type 2090 Al-Li alloy weld fusion zones’, Sci. Technol. Weld. Join., 2000, 5, (4), 257–264.
- Sundaresan S. and Ram G. D. J.: ‘Use of magnetic arc oscillation for grain refinement of gas tungsten arc welds in α-β titanium alloys’, Sci. Technol. Weld. Join., 1999, 4, (3), 151–160.
- Li Y. B., Shen Q., Lin Z. Q. and Hu S. J.: ‘Quality improvement in resistance spot weld of advanced high strength steel using external magnetic field’, Sci. Technol. Weld. Join., 2011, 16, (5), 465–469.
- Shen Q., Li Y. B., Lin Z. Q. and Chen G. L.: ‘Impact of external magnetic field on weld quality of resistance spot welding’, J. Manuf. Sci. Eng., 2011, 133, 051001-1–051001-7.
- Gatzen M., Tang Z. and Vollertsen F.: ‘Effect of electromagnetic stirring on the element distribution in laser beam welding of aluminium with filler wire’, Phys. Proc., 2011, 12, 56–65.
- Xu W., Fang H. Y., Xu D., Xu W. L., Liu X. S. and Yang J. G.: ‘Controlling welding hot cracking based on electromagnetic force’, Sci. Technol. Weld. Join., 2007, 12, (7), 659–663.
- Xu D., Liu X. S., Wang P., Yang J. G. and Fang H. Y.: ‘New technique to control welding buckling distortion and residual stress with non-contact electromagnetic impact’, Sci. Technol. Weld. Join., 2009, 14, (8), 753–759.
- Shoichi M., Yukio M., Koki T., Yasushi T., Yukinori M. and Yusuke M.: ‘Study on the application for electromagnetic controlled molten pool welding process in overhead and flat position welding’, Sci. Technol. Weld. Join., 2013, 18, (1), 38–44.
- Budak B., Budak G. G., Ozturk G. G., Muluk N. B., Apan A. and Seyhan N.: ‘Effects of extremely low frequency electromagnetic fields on distortion product otoacoustic emissions in rabbits’, Auris Nasus Larynx, 2009, 36, 255–262.
- Li D. K., Yan B., Li Z., Gao E., Miao M., Gong D., Weng X. P., Ferber J. R. and Yuan W.: ‘Exposure to magnetic fields and the risk of poor sperm quality’, Reprod. Toxicol., 2010, 29, 86–92.
- Winker R., Ivancsits S., Pilger A., Adlkofer F. and Rudiger H. W.: ‘Chromosomal damage in human diploid fibroblasts by intermittent exposure to extremely low-frequency electromagnetic fields’, Mutat. Res., 2005, 585, 43–49.
- Maaroufi K., Save E., Poucet B., Sakly M., Abdelmelek H. and Aissouni L. H.: ‘Oxidative stress and prevention of the adaptive response to chronic iron overload in the brain of young adult rats exposed to a 150 kilohertz electromagnetic field’, Neuroscience, 2011, 186, 39–47.
- ICNIRP Guidelines: ‘Guidelines for limiting exposure to time-varying electric, magnetic, and electromagnetic fields (up to 300 GHz)’, Health Phys., 1998, 74, (4), 494–522.
- Kou S. and Sun D. K.: ‘Fluid flow and weld penetration in stationary arc welds’, Metall. Trans. A, 1985, 16A, 203–213.
- Tsao K. C. and Wu C. S.: ‘Fluid flow and heat transfer in GMA weld pools’, Weld. J., 1988, 67, 70s–76s.
- Murphy A. B., Tanaka M., Yamamoto K., Tashiro S., Lowke J. J. and Ostrikov K.: ‘Modelling of arc welding: the importance of including the arc plasma in the computational domain’, Vacuum, 2010, 85, 579–584.
- Wilson J. L., Clauseen G. E. and Jackson C. E.: ‘The effect of I2R heating on electrode melting rate’, Weld. J., 1956, 35, (1), 1s–8s.
- Tusek J.: ‘A mathematical model for the melting rate in welding with a multiple-wire electrode’, J. Phys. D: Appl. Phys., 1999, 32, 1739–1744.
- Chandel R. S.: ‘Mathematical modeling of melting rates for submerged arc welding’, Weld. J., 1987, 66, (5), 135s–140s.
- Chandel R. S.: ‘Wire melting rate in mild steel MIG welding’, Met. Constr., 1988, 22, (5), 214–216.
- Lesnewich A., et al., ‘Control of melting rate and metal transfer in gas-shielded metal-arc welding part 1 – control of electrode melting rate’, Weld. J., 1958, 37, (8), 343s–353s.
- Sharma A., Arora N. and Mishra B. K.: ‘Modified mathematical models for melting rate during submerged arc welding’, Indian Weld J., 2007, 40, (4), 21–32.
- Sharma A., Arora N. and Mishra B. K.: ‘A practical approach towards mathematical modeling of deposition rate during twin-wire submerged arc welding’, Int. J. Adv. Manuf. Technol., 2008, 36, (5–6), 463–474.
- Sharma A., Arora N. and Mishra B. K.: ‘Statistical modeling of deposition rate in twin-wire submerged arc welding’, P. I. Mech. Eng. B-J. Eng., 2009, 223, (7), 851–863.
- http://www.msm.cam.ac.uk/map/steel/programs/weldsoft-e.html..
- McGlone J. C. and Chadwick D. B.: ‘The submerged arc butt welding of mild steel part 2: the prediction of weld bead geometry from the procedure parameters’, The Welding Institute Report No. 80/1978/PR; Dec. 1978..
- Yang L. J., Bibby M. J. and Chandel R. S.: ‘Linear regression equations for modeling the submerged-arc welding process’, J. Mater. Process. Technol., 1993, 39, (1–2), 33–42.