Characterisation of Al–Ti dissimilar material joints fabricated using ultrasonic additive manufacturing

References

• ASM International: ‘Welding fundamentals and processes – ultrasonic additive manufacturing’ Vol. 6A, 2011, Materials Park, OH, USA, ASM International.
   Google Scholar
• R. Hahnlen and M. Dapino: ‘NiTi–Al interface strength in ultrasonic additive manufacturing composites’, Composites B, 2014, 59B, 101–108. doi: 10.1016/j.compositesb.2013.10.024
   Web of Science ®Google Scholar
• C. Mou, P. Saffari, D. Li, K. Zhou, L. Zhang, R. Soar and I. Bennion: ‘Smart structure sensors based on embedded fibre Bragg grating arrays in aluminium alloy matrix by ultrasonic consolidation’, Meas. Sci. Technol., 2009, 20, 1–6. doi: 10.1088/0957-0233/20/3/034013
   PubMed Web of Science ®Google Scholar
• M. Sriraman, M. Gonser, H. Fujii, S. Babu and M. Bloss: ‘Thermal transients during processing of materials by very high power ultrasonic additive manufacturing’, J. Mater. Process. Technol., 2011, 211, 1650–1657.
   Web of Science ®Google Scholar
• J. Obielodan, A. Ceylan, L. Murr and B. Stucker: ‘Multi-material bonding in ultrasonic consolidation’, Rapid Prototyping J., 2010, 16, (3), 180–188. doi: 10.1108/13552541011034843
   Web of Science ®Google Scholar
• A. Truog: ‘Bond Improvement of Al/Cu joints created by very high power ultrasonic additive manufacturing’, Master's thesis, The Ohio State University, Columbus, OH, USA 2012.
   Google Scholar
• P. Wolcott, A. Hehr and M. Dapino: ‘Optimized welding parameters for Al 6061 ultrasonic additive manufactured structures’, J. Mater. Res., 2014, 29, (27), 2055–2065. doi: 10.1557/jmr.2014.139
   Web of Science ®Google Scholar
• C. Hopkins, P. Wolcott, M. Dapino, A. Truog, S. Babu and S. Fernandez: ‘Optimizing ultrasonic additive manufactured Al 3003 properties with statistical modeling’, J. Eng. Mater. Technol., 2012, 134, 011004-1–011004-10. doi: 10.1115/1.4005269
   Google Scholar
• C. Hopkins, S. Fernandez and M. Dapino: ‘Statistical characterization of ultrasonic additive manufacturing Ti/Al composites’, J. Eng. Mater. Technol., 2010, 132, 041006-1–041006-9. doi: 10.1115/1.4002073
   Google Scholar
• J. Obielodan, B. Stucker, E. Martinez, J. Martinez, D. Hernandez, D. Ramirez and L. Murr: ‘Optimization of the shear strengths of ultrasonically consolidated Ti/Al 3003 dual-material structures’, J. Mater. Process. Technol., 2011, 211.
   Web of Science ®Google Scholar
• ASM International: ‘Properties of wrought aluminum and aluminum alloys – properties and selection: nonferrous alloys and special-purpose materials’ Vol. 2, 1992, ASM International.
   Google Scholar
• A. Miriyev, A. Stern, E. Tuval, S. Kalabukhov, Z. Hooper and N. Frage: ‘Titanium to steel joining by spark plasma sintering (SPS) technology’, J. Mater.Process. Technol., 2013, 213.
   Web of Science ®Google Scholar
• C. Zhang, A. Deceuster and L. Li: ‘A method for bond strength evaluation for laminated structures with application to ultrasonic consolidation’, J. Mater. Eng. Perform., 2009, 18, (8), 1124–1132. doi: 10.1007/s11665-008-9342-1
   Web of Science ®Google Scholar
• Y. Kim and A. Fuji: ‘Factors dominating joint characteristics in Ti–Al friction welds’, Sci. Technol. Weld. Join., 2002, 7, (3), 149–154. doi: 10.1179/136217102225004185
   Web of Science ®Google Scholar
• A. Fuji: ‘Friction welding of Al–Mg–Si alloy to Ni–Cr–Mo low alloy steel’, Sci. Technol. Weld. Join., 2004, 9, (1), 83–89. doi: 10.1179/136217104225017166
   Web of Science ®Google Scholar
• M. Sloboda: ‘Design and strength of brazed joints’, 1961, London, Johnson Matthey Metals.
   Google Scholar
• G. Heness, R. Wuhrer and W. Yeung: ‘Interfacial strength development of roll-bonded aluminium/copper metal laminates’, Mater. Sci. Eng. A, 2008, A483–A484, 740–742.
   Web of Science ®Google Scholar
• C. Kwan and Z. Wang: ‘Microstructure evolution upon annealing of accumulative roll bonding (ARB) 1100 Al sheet materials: evolution of interface microstructures’, J. Mater. Sci., 2008, 43, 5045–5051. doi: 10.1007/s10853-008-2614-1
   Web of Science ®Google Scholar