Advanced search
Publication Cover
International Journal of Cast Metals Research Volume 23, 2010 - Issue 6
Submit an article Journal homepage
73
Views
9
CrossRef citations to date
0
Altmetric
Articles

Improvement in fracture toughness of austempered ductile iron by two-step austempering process

K. S. RavishankarDepartment of Metallurgical and Materials Engineering, National Institute of Technology Karnataka, Surathkal, Mangalore, 575025Karnataka, India
,
P. P. RaoDepartment of Metallurgical and Materials Engineering, National Institute of Technology Karnataka, Surathkal, Mangalore, 575025Karnataka, India
&
K. R. UdupaDepartment of Metallurgical and Materials Engineering, National Institute of Technology Karnataka, Surathkal, Mangalore, 575025Karnataka, India
Pages 330-343 | Published online: 18 Jul 2013

REFERENCES

  • R. B. Gundalach and J. F. Janowak: Met. Frog., 1985, 128, (2), 19–26.
  • R. B. Gundalach and J. F. Janowak: AFS Trans., 1983, 91, 3777–3788.
  • G. Wilkinson and C. Grupke: Proc. 2nd Int. Conf. on Austempered ductile iron', Ann Arbor, MI, USA, March 1986, ASME Gear Research Institute, 349–358.
  • M. Johansson: AFS Trans., 1977, 85, 117–122.
  • R. A. Harding: Met. Mater., 1986, 2, 65.
  • P. Shanmugam, P. P. Rao, K. R. Udupa and N. Venkataraman: J. Mater. Set, 1994, 29, 4933–4940.
  • I. Schmidt: Z. Metalkd, 1984, 75, 747–751.
  • S. M. Shah and J. D. Verhoeven: Wear, 1986, 113, 267–273.
  • T. Shiokawa: 'Production experience in austempering of ductile iron castings', Proc. 1st Int. Conf. on ADI, Chicago, IL, USA, ASM, April 1984, 2–4.
  • J. F. Janowak, R. B. Gundlach, G. T. Eldis and K. Rohrig: Proc. 48th Int. Foundry Cong., Varna, Bulgaria, World Foundrymen Organisation, October 1981, 1–15.
  • D. J. Moore, T. N. Rouns and K. B. Rundman: AFS Trans., 1985, 93, 765–776.
  • T. N. Rouns, K. B. Rundman and D. M. Moore: AFS Trans., 1984, 92, 815–839.
  • N. Darwish and R. Elliott: Mater. Set Technol, 1993, 9, 586–602.
  • N. Darwish and R. Elliott: Mater. Sci Technol, 1993, 9, 882–889.
  • P. P. Rao and S. K. Putatunda: Metall Mater. Trans. A, 1997, 28A, 1457–1470.
  • I. Bartosiewricz, I. Singh, F. A. Alberts, A. R. Krause and S. K. Putatunda: J. Mater. Eng. Perform., 1993, 4, 90–101.
  • S. K. Putatunda and I. Singh: J. Test. Eval., 1995, 23, 325–332.
  • S. K. Putatunda, R. Gupta and P. P. Rao: Microstruct. Sci, 1996, 24, 103–110.
  • P. P. Rao and S. K. Putatunda: Metal!. Mater. Trans. A, 1998, 29A, 3005–3015.
  • P. P. Rao and S. K. Putatunda: Mater. Set Technol., 1998, 14, 1257–1265.
  • S. Daber and P. P. Rao: J. Mater. Sci., 2008, 43, 357–367
  • S. Daber, K. S. Ravishankar and P. P. Rao: J. Mater. Sci, 2008, 43, 4929–4937.
  • M. Grech: Proc. World Conf. on Austempered ductile iron', Bloomingdale, IL, USA, March 1991, AFS, 600–621.
  • S. K. Putatunda: Mater. Set Eng. A, 2001, A315, 70–80.
  • J. Yang and S. K. Putatunda: Mater. Sci Forum, 2003, 913, 913–918.
  • J. Yang and S. K. Putatunda: Mater. Set Eng. A, 2005, A393, 254.–268.
  • S. K. Putatunda: Mater. Des., 2004, 25, 219–230.
  • H. Bayati, R. Elliot and G. W. Lorimer: Mater. Sci Technot, 1995, 11, 776–786.
  • E. V. Pereloma and C. S. Anderson: Mater. Sci Technot, 2006,22, 1112–1118
  • ASTM International: 'Annual book of ASTM standards', 03.01, 745; 1992, Philadelphia, PA, ASTM International.
  • ASTM International: 'Annual book of ASTM standards', 03. 01, 130; 1992, Philadelphia, PA, ASTM International.
  • B. D. Cullity: 'Elements of X-ray diffraction', 411; 1974, Reading, MA, Addison-Wesley.
  • C. S. Roberts: Trans. AIME, 1953, 197, 203–204.
  • B. D. Culity: 'Elements of X-ray diffraction', 102; 1974, Reading, MA, Addison-Wesley.
  • R. C. Voigt and C. R. Loper: Proc. 1st Int. Conf. on Austempered ductile iron', 83; 1984, Metals Park, OH, ASM International.
  • K. L. Hayrynen, D. J. Moore and K. B. Rundman: AFS Trans., 1992, 98, 471–476.
  • M. Takahashi and H. K. D. H. Bhadeshia: Mater. Trans., JIM, 1991, 3, 689–696.
  • J. Wang and S. van der Zwaag: Metall Mater. Trans. A, 2001, 32A, 1527–1539.
  • I. Tsukatani, S. Hashimoto and T. Inoue: ISIJ Int., 1991, 31, (9), 992–1000.
  • G. E. Dieter: 'Mechanical metallurgy', 371; 1961, New York, McGraw-Hill Book Company.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.