Advanced search
Publication Cover
International Journal of Cast Metals Research Volume 23, 2010 - Issue 6
Submit an article Journal homepage
75
Views
10
CrossRef citations to date
0
Altmetric
Rapid Communication

Effects of applied pressure on density, microstructure and tensile strength of Al–Zn–Mg–Cu alloy prepared by squeeze casting

C. H. FanSchool of Materials Science and Engineering, Hunan University, Changsha 78:410082, China
,
Z. H. ChenSchool of Materials Science and Engineering, Hunan University, Changsha 78:410082, China
,
J. H. ChenSchool of Materials Science and Engineering, Hunan University, Changsha 78:410082, China
&
D. ChenSchool of Materials Science and Engineering, Hunan University, Changsha 78:410082, China
Pages 349-353 | Published online: 18 Jul 2013

REFERENCES

  • P. Z. Chao and T. Tsuchida: 'Effect of fabrication conditions and Cr, Zr contents on the grain structure of 7075 and 6061 aluminum alloys', Mater. Set Eng. A, 2009, A499, 78–82.
  • D. Liu, H. V. Atkinson and P. Kapranos: `Microstructural evolution and tensile mechanical properties of thixoformed high performance aluminium alloys', Mater. Sci. Eng. A, 2003, A361, 213–224.
  • W. Y. Kim, C. G. Kang and B. M. Kim: 'Deformation behavior of wrought aluminum alloys in incremental compression experi-ment with a closed die', J. Mater. Process. Technol., 2007, 191, 372–376.
  • G. A. Chadwick and T. M. Yue: 'Principles and applications of squeeze castings', Met. Mater., 1989, 5, 6–11.
  • M. Gallerneault, G. Durrant and B. Cantor: 'Eutectic channeling in a squeeze cast Al-4.5%Cu alloy', Scr. Metall. Mater., 1995, 32, 1553–1557.
  • M. R. Ghomashchi and A. Vikhrov: 'Squeeze casting: an overview', J. Mater. Process. Technol., 2000, 101, 1–9.
  • F. Shehata: 'Squeeze casting of Al-Cu and Al-Si alloys', Process. Adv. Mater., 1994, 4, 136–140.
  • H. R. Hashemi, H. Ashoori and P. Davami: 'Microstructure and tensile properties of squeeze cast Al-Zn-Mg-Cu alloy', Mater. Sci. Technol., 2001, 17, 639–644.
  • T. M. Yue: 'Comparison of the fatigue behaviour of an Al-Zn-Mg-Cu alloy (7010) in the form of squeeze and chill castings and rolled plate', J. Mater. Sci., 1990, 25, 175–182.
  • T. M. Yue: 'Squeeze casting of high-strength aluminium wrought alloy AA7071', J. Mater. Process. Technol., 1997, 66, 179–185.
  • S. W. Kim, D. Y. Kim, W. G. Kim and K. D. Woo: 'The study on characteristics of heat treatment of the direct squeeze cast 7075 wrought Al alloy', Mater. Sci. Eng. A, 2001, A304-306, 721–726.
  • V. M. Plyatski: 'Extrusion casting'; 1965, New York, Primary Source Inc.
  • J. Benedyk and W. Shaw: Light Met. Age, 1969, 27, (5), 6.
  • A. Maleki, B. Niroumand and A. Shafyei: 'Effects of squeeze casting parameters on density, macrostructure and hardness of LM13 alloy', Mater. Sci. Eng. A, 2006, A428, 135–140.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.