43
Views
1
CrossRef citations to date
0
Altmetric
Research Papers

Partially stabilised zirconia stability prediction based on opposite degree algorithm for safety engineering

, , &
Pages S5-671-S5-673 | Received 20 Oct 2014, Accepted 18 Dec 2014, Published online: 30 May 2015

References

  • W. Q. Zhang, J. X. Xie, Z. G. Yang and C. Z. Wang: ‘Microstructure and properties of composite of stainless steel and partially stabilized zirconia’, Trans. Nonferrous Met. Soc. China, 2003, 13, 140–144.
  • Q. Shen, L. M. Zhang, J. G. Li and C. B. Wang: ‘Degradation of partially stabilized zirconia ceramics under an applied stress’, J. Wuhan Univ. Technol. – Mater. Sci. Ed., 2003, 18, 17–19.
  • J. F. Wu, X. H. Xu and G. M. Wang: ‘Surface electrical properties and structure of yttria-partially-stabilized zirconia implanted with 57Fe ions’, J. Wuhan Univ. Technol. – Mater. Sci. Ed., 2000, 15, 52–58.
  • Y. Man, P. Gong, Y. H. Lin, Y. H. Lin, M. Wang, Y. L. Qu, P. Wang, Y. Ban, H. Tang, F. F. Wang and X. J. Wang: ‘Comparative evaluation of the implant made of yttrium-partially stabilized zirconia and pure titanium on stress distribution by anisotropic finite element method’, J. Wuhan Univ. Technol. – Mater. Sci. Ed., 2005, 20, 147–149.
  • S. Martin, H. Berek, C. G. U. Aneziris Martin and D. Rafaja: ‘Pitfalls of local and quantitative phase analysis in partially stabilized zirconia’, J. Appl. Crystallogr., 2012, 45, 1136–1144.
  • M. Jasim Kadhim, S. I. Al-Rubaiey and A. S. Hammood: ‘The influence of laser specific energy on laser sealing of plasma sprayed yttria partially stabilized zirconia coating’, Opt. Lasers Eng., 2013, 51, 159–166.
  • S. H. Guo, G. Chen, J. H. Peng, J. Chen, J. L. Mao, D. B. Li and L. J. Liu: ‘Preparation of partially stabilized zirconia from fused zirconia using roasting’, J. Alloys Compd., 2010, 506, L5–L7.
  • D. B. Li, L. J. Liu, J. H. Peng, S. H. Guo and G. Chen: ‘Prediction method of stability of partially stabilized zirconia based on SVM and BP neural network’, Chin. J. Rare Met., 2011, 35, 759–763 ( in Chinese).
  • L. J. Liu, D. B. Li, J. H. Peng, S. H. Guo, L. B. Zhang and G. Chen: ‘Preparation of partially stabilized zirconia by microwave heating and study on prediction of the stability’, Mater. Rev. B Res. Ed., 2011, 25, 131–134 ( in Chinese).
  • Z. G. Liu, M. Q. Liu, X. Z. Wang, X. G. Yue and Q. Wu: ‘Partially stabilized zirconia stability prediction based on SVMR’, China Ceram., 2013, 49, 62–65 ( in Chinese).
  • X. G. Yue, G. Zhang, Q. Wu, F. Li, X. F. Chen, G. F. Ren and M. Li: ‘Stellite Alloys Wearing Prediction Based on Opposite Degree Algorithm’, Rare Metals, 2015, 34, (2), 125–132.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.