References
- J. J. Hwan and C. K. Young: ‘The effect of tube rupture location on the consequences of multiple SG tube rupture event’, Ann. Nucl. Energy, 2002, 29, 1809–1826.
- EPRI, Proceedings: ‘Specialist meeting on environmental degradation of Alloy 600’, Report TR-104898, EPRI, USA, 1996.
- S. S. Hwang, Y. S. Lim and H. P. Kim: ‘Electrochemical interpretation of a stress corrosion cracking of thermally treated Ni base alloys in a lead contaminated water’, Solid State Phenom., 2007, 124–126, 1545–1548.
- S. Ahn, V. S. Rao and H. Kwon: ‘Effects of PbO on the repassivation kinetics of alloy 690’, Corros. Sci., 2006, 48, 1137–1153.
- D. Ghosh, G. Subhash and R. Radhakrishnan: ‘Scratch-induced microplasticity and microcracking in zirconium diboride–silicon carbide composite’, Acta Mater., 2008, 56, 3011–3022.
- M. L. S. Fuller, R. J. Klassen and N. S. McIntyre: ‘Texture, residual strain, and plastic deformation around scratches in alloy 600 using synchrotron X-ray Laue micro-diffraction’, J. Nucl. Mater., 2008, 374, 482–487.
- E. Völker, C. G. Inchauspe and E. J. Calvo: ‘Scanning electrochemical microscopy measurement of ferrous ion fluxes during localized corrosion of steel’, Electrochem. Commun., 2006, 8, 179–183.
- K. Holmberg, A. Laukkanen and H. Ronkainen: ‘Tribological contact analysis of a rigid ball sliding on a hard coated surface. Part I: modelling stresses and strains’, Surf. Coat. Technol., 2006, 200, 3793–3809.
- S. X. Hou, J. J. Luo and Q. H. Zhang: ‘Research on pitting corrosion of steam generator heat transfer tubes based on acoustic emission’, Kerntechnik, 2010, 75, 277–281.
- D. Xunshen: ‘Pitting and its protection of SG tubes in nuclear power plants’, Corros. Protect., 2007, 28, 364–366.
- A. G. Beattie and R. A. Jaramillo: ‘The measurement of energy in acoustic emission’, Rev. Sci. Instrum., 1974, 45, 352–357.
- C. Vanegas and P. Holtham: ‘On-line froth acoustic emission measurements in industrial sites’, Miner. Eng., 2008, 21, 883–888.
- D. Renusch and M. Schütze: ‘Experience with the use of the acoustic emission technique for monitoring scale failure in wet and dry environments’, Mater. High Temp., 2005, 22, 1–6.
- F. Ferrer, H. Idrissi and H. Mazille: ‘Study of abrasion-corrosion of AISI 304L austenitic stainless steel in saline solution using acoustic emission technique’, NDT E. Int., 2000, 33, 363–371.
- H. L. Dunegan, D. Harris and A. S. Tetelman: ‘Detection of fatigue crack growth by acoustic emission techniques’, Mater. Eval., 1970, 28, 221–227.