70
Views
0
CrossRef citations to date
0
Altmetric
Research Papers

Comparison of microstructure and chemical composition of hydroxyapatite and fluorapatite coatings deposited on Ti-6Al-4V substrates by Nd-YAG laser

, , , , , & show all
Pages S5-1318-S5-1322 | Received 20 Oct 2014, Accepted 18 Dec 2014, Published online: 30 May 2015

References

  • K. Cheng, S. Zhang and W. Weng: ‘The F content in sol–gel derived FHA coatings: an XPS study’, Surf. Coat. Technol., 2005, 198, 237–241.
  • G. L. De Lange and K. Donath: ‘Interface between bone tissue and implants of solid hydroxyapatite or hydroxyapatite-coated titanium implants’, Biomaterials, 1989, 10, 121–125.
  • H. U. Lee, Y. S. Jeong, S. Y. Park, S. Y. Jeong and H. G. Kim: ‘Surface properties and cell response of fluoridated hydroxyapatite/TiO2 coated on Ti substrate’, Curr. Appl. Phys., 2009, 9, 528–533.
  • R. M. Pilliar, M. J. Filiaggi, J. D. Wells, M. D. Grynpas and R. A. Kandel: ‘Porous calcium polyphosphate scaffolds for bone substitute applications – in vitro characterization’, Biomaterials, 2001, 22, 963–972.
  • G. X. Ni, K. Y. Chiu, W. W. Lu, Y. Wang, Y. G. Zhang, L. B. Hao, Z. Y. Li, W. M. Lam, S. B. Lu and K. D. K. Luk: ‘Strontium-containing hydroxyapatite bioactive bone cement in revision hip arthroplasty’, Biomaterials, 2006, 27, 4348–4355.
  • Z. Y. Cai, D. A. Yang, N. Zhang, C. G. Ji, L. Zhu and T. Zhang: ‘Poly (propylene fumarate)/ (calcium sulphate/β-tricalcium phosphate) composites: preparation, characterization and in vitro degradation’, Acta Biomater., 2009, 5, 628–635.
  • M. D. Grynpas, R. M. Pilliar, R. A. Kandel, R. Renlund, M. Filiaggi and M. Dumitriu: ‘Porous calcium polyphosphate scaffolds for bone substitute applications in vivo studies’, Biomaterials, 2002, 23, 2063–2070.
  • C. Zou, W. Weng, X. Deng, K. Cheng, X. Liu, P. Du, G. Shen and G. Han: ‘Preparation and characterization of porous β-tricalcium phosphate/collagen composites with an integrated structure’, Biomaterials, 2005, 26, 5276–5284.
  • Z. Y. Cai, T. Zhang, L. Z. Di, D. M. Xu, D. H. Xu and D. A. Yang: ‘Morphological and histological analysis on the in vivo degradation of poly (propylene fumarate)/(calcium sulfate/β-tricalcium phosphate)’, Biomed. Microdev., 2011, 13, 623–631.
  • S. H. Kwon, Y. K. Jun, S. H. Hong and H. E. Kim: ‘Synthesis and dissolution behavior of β-TCP and HA/β-TCP composite powders’, J. Eur. Ceram. Soc., 2003, 23, 1039–1045.
  • C. Knabe, G. Berger, R. Gildenhaar, C. R. Howlett and B. Markovic: ‘The functional expression of human bone-derived cells grown on rapidly resorbable calcium phosphate ceramics’, Biomaterials, 2004, 25, 335–344.
  • S. Zhang, X. Zeng, Y. Wang, K. Cheng and W. Weng: ‘Adhesion strength of sol–gel derived fluoridated hydroxyapatite coatings’, Surf. Coat. Technol., 2006, 200, 6350–6354.
  • X. Zheng, M. Huang and C. Ding: ‘Bond strength of plasma-sprayed hydroxyapatite/Ti composite coatings’, Biomaterials, 2000, 21, 841–849.
  • S. Overgaard, M. Lind, H. Grundvig and C. Biinger: ‘Hydroxyapatite and fluorapatite coatings for fixation of weight loaded implants’, Clin. Orthop. Rel. Res., 1997, 336, 286–296.
  • H. Ji and P. M. Marquis: ‘Effect of heat treatment on the microstructure of plasma-sprayed hydroxyapatite coating’, Biomaterials, 1993, 14, 64–68.
  • J. Zhou, X. Zhang, J. Chen, S. Zeng and K. de Groot: ‘High temperature characteristics of synthetic hydroxyapatite’, J. Mater. Sci. Mater. Med., 1993, 4, 83–85.
  • N. Ignjatović, S. Tomić, M. Dakić, M. Miljković, M. Plavšić and D. Uskoković: ‘Synthesis and properties of hydroxyapatite/poly-l-lactide composite biomaterials’, Biomaterials, 1999, 20, 809–816.
  • K. A. Bhadang and K. A. Gross: ‘Influence of fluorapatite on the properties of thermally sprayed hydroxyapatite coatings’, Biomaterials, 2004, 25, 4935–4945.
  • C. Y. Yang, T. M. Lee, Y. Z. Lu, C. W. Yang, T. S. Lui, A. Kuo and B. W. Huang: ‘The influence of plasma-spraying parameters on the characteristics of fluorapatite coatings’, J. Med. Biol. Eng., 2010, 30, 91–98.
  • J. Zhou, X. Zhang, J. Chen, S. Zeng and K. de Groot: ‘High-temperature characteristics of synthetic hydroxyapatite’, J. Mater. Sci. Mater. Med., 1993, 4, 83–85.
  • Y. Sen and C. M. Hau: ‘Fabrication of bioactive HA/Ti composite coating by laser cladding’, Key Eng. Mater., 2007, 330–332, 569–572.
  • C. S. Chien, T. F. Hong, T. J. Han, T. Y. Kuo and T. Y. Liao: ‘Effects of different binders on microstructure and phase composition of hydroxyapatite Nd–YAG laser clad coatings’, Appl. Surf. Sci., 2011, 257, 2387–2393.
  • C. S. Chien, T. Y. Liao, T. F. Hong, T. Y. Kuo, C. H. Chang, M. L. Yeh and T. M. Lee: ‘Surface microstructure and bioactivity of hydroxyapatite and fluorapatite coatings deposited on Ti-6Al-4V substrates using Nd-YAG laser’, J. Med. Biol. Eng., 2014, 34, 109–115.
  • C. S. Chien, T. Y. Liao, T. F. Hong, T. Y. Kuo, J. L. Wu and T. M. Lee: ‘Investigation into microstructural properties of fluorapatite Nd-YAG laser clad coatings with PVA and WG binders’, Surf. Coat. Technol., 2011, 205, 3141–3146.
  • A. Kurella and N. B. Dahotre: ‘Laser induced hierarchical calcium phosphate structures’, Acta Biomater., 2006, 2, 677–683.
  • Y. Fujishiro, N. Sato, S. Uchida and T. Sato: ‘Coating of CaTiO3 on titanium substrates by hydrothermal reactions using calcium-ethylene diamine tetra acetic acid chelate’, J. Mater. Sci. Mater. Med., 1998, 9, 363–367.
  • L. Jonásová, F. A. Müller, A. Helebrant, J. Strnad and P. Greil: ‘Biomimetic apatite formation on chemically treated titanium’, Biomaterials, 2004, 25, 1187–1194.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.